EDG NEMESIS 2.1 UPDATE

The EDG-Nemesis 2.1 has a new feature that allows you to update your image without having to riflashare your decoder.
IMPORTANT:
UPDATE FIRMWARE CAN 'DO only if the image is installed in flash

This is a brief guide on how to update the new image EDG-Nemesis 2.1

1) Press the blue button

2) check if a video pops up this message, it means that if there is an update available for the image



3) press the blue button again and you will see this menu



4) select Software Update and press ok

5) when the update is finished will alert you with a message

6) then will ask you to reboot the machine

IMPORTANT:

BEFORE AND SEPARATE REBOOTTARE DISABLE ALL EXTERNAL HARDWARE

Rebooting should be made with the rear button switch on / off

For DM8000_800_800s_500HD


many thanks to all the Team EDG-Nemesis