Printable View
Hi,
Something must have broken in my image today (I had a crash today) and I cannot watch any TS recordings, no matter if they were recorded before or after the issue happened. Files uploaded from the computer can be watched (mp4, mkv, etc.).
My image: satdreamgr-OpenPLi 2017-12-20 15:32:55 (2017-12-19 develop)
Do you think there is a way to repair the issue without a reflash?
I wonder if this crash might have caused the issue:
Code:OpenPLi Enigma2 crash log
crashdate=śro gru 20 15:12:41 2017
compiledate=Dec 17 2017
skin=PLi-FullNightHD/skin.xml
sourcedate=2017-12-17
branch=develop
rev=75c369e
component=enigma2, signal
stbmodel=et9000
stbmodel=dm800se
kernelcmdline= bmem=216M ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs console=null consoleblank=0
nimsockets=NIM Socket 0:
imageissue=satdreamgr-openpli 5 %h
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
REMOVE Peer et9x00
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
PC: 767cda68
00000000 00000001 00000000 00000020
00000003 7fa592b0 00000000 00000000
000004d6 00000000 00000001 ffffffff
76b5b380 00000000 00000000 76a96e14
00000000 7fa592b0 00000006 7fa593e8
00000000 00000061 00000004 768f5d64
00000000 767ce584 00000010 00000000
768fde00 7fa59218 01384708 767cd9f4
Backtrace:
/usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x46430C]
/lib/libc.so.6(gsignal) [0x767CDA6A]
-------FATAL SIGNAL
dmesg
<7>pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
<6>PCI host bridge to bus 0000:01
<6>pci_bus 0000:01: root bus resource [mem 0x10510000-0x1051ffff]
<6>pci_bus 0000:01: root bus resource [io 0x8400-0x87ff]
<6>pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
<7>pci 0000:01:00.0: [14e4:8602] type 00 class 0x01010f
<6>PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42)
<7>pci 0000:01:00.0: reg 24: [mem 0x00000000-0x00000fff]
<7>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x000007ff pref]
<7>pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
<6>pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
<6>pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
<6>Bluetooth: Core ver 2.16
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO socket layer initialized
<6>cfg80211: Calling CRDA to update world regulatory domain
<6>Switching to clocksource upg
<5>FS-Cache: Loaded
<6>NET: Registered protocol family 2
<6>TCP established hash table entries: 4096 (order: 3, 32768 bytes)
<6>TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 4096 bind 4096)
<6>TCP: reno registered
<6>UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>PCI: CLS 0 bytes, default 64
<5>NFS: Registering the id_resolver key type
<5>Key type id_resolver registered
<5>Key type id_legacy registered
<6>fuse init (API version 7.20)
<6>msgmni has been set to 567
<6>io scheduler noop registered
<6>io scheduler cfq registered (default)
<6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
<6>serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
<6>serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67) is a 16550A
<6>loop: module loaded
<7>sata_brcmstb 0000:01:00.0: version 4.0
<7>__clk_enable: sata [1]
<4>PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
<7>sata_brcmstb 0000:01:00.0: setting latency timer to 64
<6>scsi0 : sata_brcmstb
<6>scsi1 : sata_brcmstb
<6>ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
<6>ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
<6>Broadcom STB NAND controller (BrcmNand Controller)
<6>bcmemac: Broadcom STB 10/100 EMAC driver v3.0
<6>bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:16:b4:03:9f:97)
<6>bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
<6>usbcore: registered new interface driver zd1201
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>__clk_enable: usb [1]
<6>ehci-brcm ehci-brcm.0: Broadcom STB EHCI
<6>ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
<6>ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
<6>ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>ehci-brcm ehci-brcm.1: Broadcom STB EHCI
<6>ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
<6>ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
<6>ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>ohci-brcm ohci-brcm.0: Broadcom STB OHCI
<6>ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
<6>ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>ohci-brcm ohci-brcm.1: Broadcom STB OHCI
<6>ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
<6>ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>mousedev: PS/2 mouse device common for all mice
<6>i2c /dev entries driver
<6>usbcore: registered new interface driver btusb
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>TCP: cubic registered
<6>NET: Registered protocol family 17
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>Bluetooth: HIDP socket layer initialized
<5>Key type dns_resolver registered
<6>EBI CS1: setting up NAND flash (primary)
<6>mtd->oobsize=0, mtd->eccOobSize=0
<4>NAND_CS_NAND_XOR=00000000
<4>B4: NandSelect=50000200, nandConfig=15142200, chipSelect=1
<4>brcmnand_read_id: CS1: dev_id=ecf10095
<4>After: NandSelect=50000200, nandConfig=15142200
<4>Block size=00020000, erase shift=17
<6>NAND Config: Reg=15142200, chipSize=128 MB, blockSize=128K, erase_shift=11
<6>busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
<4>timing1 not adjusted: 5363444f
<4>timing2 not adjusted: 00000fc6
<4>eccLevel=15, 1Ksector=0, oob=16
<4>nbrBitsPerCell=2, cellinfo=0, chip->cellinfo=00000000
<4><--brcmnand_set_acccontrol: acc b4: d7ff1010, after: d7ff1010
<6>BrcmNAND mfg ec f1 Samsung K9F1G08U0A 128MB on CS1
<6>
<6>Found NAND on CS1: ACC=d7ff1010, cfg=15142200, flashId=ecf10095, tim1=5363444f, tim2=00000fc6
<6>BrcmNAND version = 0x0302 128MB @00000000
<4>B4: NandSelect=50000200, nandConfig=15142200, chipSelect=1
<4>brcmnand_read_id: CS1: dev_id=ecf10095
<4>After: NandSelect=50000200, nandConfig=15142200
<4>Found NAND flash on Chip Select 1, chipSize=128MB, usable size=128MB, base=0
<4>brcmnand_scan: B4 nand_select = 50000200
<4>brcmnand_scan: After nand_select = 50000200
<6>page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17
<6>Brcm NAND controller version = 3.2 NAND flash size 128MB @18000000
<4>ECC layout=brcmnand_oob_bch4_4k
<6>brcmnand_scan: mtd->oobsize=64
<6>brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
<6>brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
<4>-->brcmnand_default_bbt
<4>brcmnand_default_bbt: bbt_td = bbt_main_descr
<7>Bad block table Bbt0 found at page 0000ffc0, version 0x01 for chip on CS1
<7>Bad block table 1tbB found at page 0000ff80, version 0x01 for chip on CS1
<7>nand_read_bbt: Bad block at 0x02580000
<7>nand_read_bbt: Bad block at 0x06420000
<4>Adjust partition complete size from entire device to 7f00000 to avoid overlap with BBT reserved space
<4>Adjust partition rootfs size from entire device to 7900000 to avoid overlap with BBT reserved space
<5>Creating 3 MTD partitions on "brcmnand.0":
<5>0x000000000000-0x000007f00000 : "complete"
<5>0x000000000000-0x000000600000 : "kernel"
<5>0x000000600000-0x000007f00000 : "rootfs"
<6>PM: CP0 COUNT/COMPARE frequency depends on divisor
<5>UBI: attaching mtd2 to ubi0
<6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>usb 1-1: new high-speed USB device number 2 using ehci-brcm
<6>ata1.00: HPA detected: current 976771055, native 976773168
<6>ata1.00: ATA-8: WDC WD5000BEVT-00ZAT0, 01.01A01, max UDMA/133
<6>ata1.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 0/32)
<6>ata1.00: configured for UDMA/133
<5>scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-0 01.0 PQ: 0 ANSI: 5
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>sd 0:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<6>scsi2 : usb-storage 1-1:1.0
<6>usb 2-1: new high-speed USB device number 2 using ehci-brcm
<6>hub 2-1:1.0: USB hub found
<6>hub 2-1:1.0: 4 ports detected
<6>ata2: SATA link down (SStatus 4 SControl 300)
<6>usb 2-1.2: new full-speed USB device number 3 using ehci-brcm
<5>UBI: scanning is finished
<5>UBI: attached mtd2 (name "rootfs", size 121 MiB) to ubi0
<5>UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>UBI: good PEBs: 966, bad PEBs: 2, corrupted PEBs: 0
<5>UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
<5>UBI: max/mean erase counter: 14/3, WL threshold: 4096, image sequence number: 74883163
<5>UBI: available PEBs: 0, total reserved PEBs: 966, PEBs reserved for bad PEB handling: 18
<6>ALSA device list:
<6> No soundcards found.
<4>Warning: unable to open an initial console.
<5>UBI: background thread "ubi_bgt0d" started, PID 51
<5>UBIFS: background thread "ubifs_bgt0_0" started, PID 52
<5>UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
<5>UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
<5>UBIFS: FS size: 118468608 bytes (112 MiB, 933 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
<5>UBIFS: reserved for root: 0 bytes (0 KiB)
<5>UBIFS: media format: w4/r0 (latest is w4/r0), UUID D7159856-EBA8-4971-8C70-D99CFA3880FC, small LPT model
<6>VFS: Mounted root (ubifs filesystem) on device 0:10.
<6>devtmpfs: mounted
<6>Freeing unused kernel memory: 316k freed
<5>scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
<5>sd 2:0:0:0: Attached scsi generic sg1 type 0
<5>sd 2:0:0:0: [sdb] 1953792 512-byte logical blocks: (1.00 GB/954 MiB)
<5>sd 2:0:0:0: [sdb] Write Protect is off
<7>sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
<3>sd 2:0:0:0: [sdb] No Caching mode page present
<3>sd 2:0:0:0: [sdb] Assuming drive cache: write through
<3>sd 2:0:0:0: [sdb] No Caching mode page present
<3>sd 2:0:0:0: [sdb] Assuming drive cache: write through
<6> sdb: sdb1
<3>sd 2:0:0:0: [sdb] No Caching mode page present
<3>sd 2:0:0:0: [sdb] Assuming drive cache: write through
<5>sd 2:0:0:0: [sdb] Attached SCSI removable disk
<6>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<6>usbcore: registered new interface driver tpm
<4>dvb: module_layout: kernel tainted.
<4>Disabling lock debugging due to kernel taint
<6>Console: switching to colour frame buffer device 160x45
<6>input: dreambox remote control (native) as /devices/virtual/input/input0
<6>input: dreambox advanced remote control (native) as /devices/virtual/input/input1
<6>DVB: registering new adapter (dvb0)
<6>platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
<6>platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...
<6>input: front panel as /devices/virtual/input/input2
<6>Console: switching to colour dummy device 80x25
<6>NET: Registered protocol family 10
Check if enabling descramble incoming streams workaround the issue.
Also et9000 has PIP?
PS, the crashlog has no useful information
Yes, it has some limited PIP but I almost never use it.
descramble incoming streams?
I see a similar option in SETTINGS - CONFIGURATION about http streams but this is probbaly not what you mean.
There is something in RECORDING MENU about including ECM's and descrambling during recording but this is probably something else.
Anyway, when I press OK to start watching a recording, I get something like this:
Attachment 4234
Also, box display shows somwthing strange:
945:34 +-861
Yes this is what I mean, the setting for http incoming stream. Can you enable it and check?
PS. Also an enigma2 debug log would be really helpfull, in order to see the error.
Upload the e2.log from /tmp folder to have a look.Code:init 4
ENIGMA_DEBUG_LVL=4 enigma2 2>&1 | tee /tmp/e2.log
So far I have not changed any menu settings.
I guess the end of the log is meaningful as regards recording playback.
I had to devide the log into 2 messages.
Code:satdreamgr-openpli 5 et9x00
et9x00 login: root
Password:
root@et9x00:~# init 4
root@et9x00:~# ENIGMA_DEBUG_LVL=4 enigma2 2>&1 | tee /tmp/e2.log
[Avahi] avahi_timeout_new
[Avahi] avahi_watch_new(3 0x1)
[Avahi] avahi_timeout_update
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] client state: 2
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[eInit] + (1) Background File Eraser
[eInit] + (5) Tuxtxt
[eInit] + (8) graphics acceleration manager
[eInit] + (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=4
[eInit] + (9) gLCD
[eFbLCD] /dev/fb1: No such file or directory
[eFbLCD] framebuffer /dev/fb1 not available
[eDboxLCD] xres=132, yres=64, bpp=8 lcd_type=1
[eLCD] (132x64x8) buffer 0x7d1be0 8448 bytes, stride 132
[gLCDDC] resolution: 132x64x8 stride=132
[eInit] + (9) GFBDC
[fb] /dev/fb0: 24300k video mem
[fb] double buffering available!
[gFBDC] resolution: 1920x1080x32 stride=7680, 8100kB available for acceleration surfaces.
[eInit] + (10) gRC
[gRC] thread created successfully
[eInit] + (15) eWindowStyleManager
[eInit] + (20) AVSwitch Driver
[eAVSwitch] failed to open /dev/dbox/fp0 to monitor vcr scart slow blanking changed: No such file or directory
[eInit] + (20) misc options
[eInit] + (20) RC Input layer
[eInit] + (20) UHF Modulator
[eRFmod] couldnt open /dev/rfmod0: No such file or directory
[eInit] + (20) DVB-CI UI
[eInit] + (21) input device driver
[eInputDeviceInit] adding device /dev/input/event0
[eRCInputEventDriver] devicename=dreambox remote control (native)
[eRCInputEventDriver] devicename=dreambox remote control (native)
[eRCDeviceInputDev] device "dreambox remote control (native)" is a remotecontrol
[eInputDeviceInit] adding device /dev/input/event1
[eRCInputEventDriver] devicename=dreambox advanced remote control (native)
[eRCInputEventDriver] devicename=dreambox advanced remote control (native)
[eRCDeviceInputDev] device "dreambox advanced remote control (native)" is a remotecontrol
[eInputDeviceInit] adding device /dev/input/event2
[eRCInputEventDriver] devicename=front panel
[eRCInputEventDriver] devicename=front panel
[eRCDeviceInputDev] device "front panel" is a remotecontrol
[eInputDeviceInit] Found 3 input devices.
[eInit] + (22) Hdmi CEC driver
[eHdmiCEC] detected physical address change: 1000 --> 2000
[eHdmiCEC] send message 84 20 00 01
[eInit] + (30) eActionMap
[eInit] + (35) CA handler
[eInit] + (35) CI Slots
[CI] scanning for common interfaces..
[CI] Slot: 0 setSource: A
[CI] Slot: 1 setSource: A
[CI] eDVBCIInterfaces setInputSource(0, A)
[CI] eDVBCIInterfaces setInputSource(1, B)
[CI] done, found 2 common interface slots
[CI] Streaming CI routing interface not advertised, assuming DVR method
[CI] Streaming CI finish interface not advertised, assuming "tuner" method
[eInit] + (40) eServiceCenter
[eServiceCenter] settings instance.
[eInit] + (41) Stream server
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Registered et9x00 (_e2stream._tcp) on et9x00:8001
[eInit] + (41) RTSP Stream server
[eInit] + (41) Encoders
[eInit] + (41) eServiceFactoryDVB
[eInit] + (41) eServiceFactoryFS
[eInit] + (41) eServiceFactoryMP3
[eInit] + (41) eServiceFactoryM2TS
[eInit] + (41) eServiceFactoryHDMI
[eInit] + (41) eServiceFactoryTS
[eInit] + (41) eServiceFactoryWebTS
[eInit] + (41) eServiceFactoryDVD
[eInit] reached rl 70
[eDVBDB] ---- opening lame channel db
[eDVBDB] reading services (version 4)
[eDVBDB] loaded 590 channels/transponders and 8681 services
eDVBSatelliteEquipmentControl::clear()
[eDVBResourceManager] scanning for frontends..
[eDVBFrontend] opening frontend 0
[eDVBFrontend] opening frontend 0
[eDVBFrontend] frontend 0 has DVB API 509
[eDVBFrontend] close frontend 0
[eDVBFrontend] opening frontend 1
[eDVBFrontend] opening frontend 1
[eDVBFrontend] frontend 1 has DVB API 509
[eDVBFrontend] close frontend 1
[eDVBAdapterLinux] get demux 0
[eDVBAdapterLinux] get demux 1
[eDVBAdapterLinux] get demux 2
[eDVBAdapterLinux] get demux 3
[eDVBAdapterLinux] get demux 4
[eDVBAdapterLinux] get demux 5
[eDVBAdapterLinux] get demux 6
[eDVBResourceManager] found 1 adapter, 2 frontends(2 sim) and 7 demux
[eDVBLocalTimeHandler] Use valid Linux Time :) (RTC?)
[eEPGCache] Initialized EPGCache (wait for setCacheFile call now)
[MAIN] Loading spinners...
[MAIN] found 10 spinner!
[setIoPrio] best-effort level 3 ok
[Misc_Options] 12Vdetect cannot open /proc/stb/misc/12V_output: No such file or directory
[HardwareInfo] Scanning hardware info
Detected: et9000 (96-2)
[Harddisk] enumerating block devices...
[Harddisk] new device sda -> /dev/sda -> /dev/sda
[Console] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
[eConsoleAppContainer] Starting hdparm
[Harddisk] new device sdb -> /dev/sdb -> /dev/sdb
Activating keymap: Default (US)
[Console] command: loadkmap < /usr/share/keymaps/default.kmap
[eConsoleAppContainer] Starting /bin/sh
Activating language Polski
[gRC] main thread is non-idle! display spinner!
[NimManager] Reading satellites.xml
eDVBSatelliteEquipmentControl::clear()
[SecConfigure] sec config cleared
[eDVBFrontend] setSlotInfo for dvb frontend 0 to slotid 0, descr AVL2108, need rotorworkaround No, enabled Yes, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 1 to slotid 1, descr AVL2108, need rotorworkaround No, enabled Yes, DVB-S2 Yes
[SecConfigure] tuner 1 depends on satpos of 0
[eDVBSatelliteEquipmentControl::setTunerDepends] tu=1, 0
[SecConfigure] slot: 0 configmode: simple
[eDVBSatelliteEquipmentControl::setSlotNotLinked] slot=0
[SecConfigure] diseqcmode: positioner
[eDVBSatelliteEquipmentControl::addLNB] lnb=0)
eDVBSatelliteEquipmentControl::setLNBSatCRformat(0)
[eDVBSatelliteEquipmentControl::setLNBNum] lnbnum=1
[eDVBSatelliteEquipmentControl::setLNBLOFL] logfl=9750000
[eDVBSatelliteEquipmentControl::setLNBLOFH] lofh=10600000
[eDVBSatelliteEquipmentControl::setLNBThreshold] threshold=11700000
[eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage] onoff=0
[eDVBSatelliteEquipmentControl::setRepeats] repeat=0
[eDVBSatelliteEquipmentControl::setFastDiSEqc] onoff=0
[eDVBSatelliteEquipmentControl::setSeqRepeat] onoff=0
[eDVBSatelliteEquipmentControl::setCommandOrder] order=0
[eDVBSatelliteEquipmentControl::setDiSEqcMode] mode=3
[eDVBSatelliteEquipmentControl::setToneburst] toneburst=0
[eDVBSatelliteEquipmentControl::setCommittedCommand] command=4
[eDVBSatelliteEquipmentControl::setUncommittedCommand] command=0
[eDVBSatelliteEquipmentControl::setLatitude] lattitude=53.687000
[eDVBSatelliteEquipmentControl::setLaDirection] direction=0
[eDVBSatelliteEquipmentControl::setLongitude] longitude=21.771999
[eDVBSatelliteEquipmentControl::setLoDirection] direction=2
[eDVBSatelliteEquipmentControl::setUseInputpower] onoff=0
[eDVBSatelliteEquipmentControl::setInputpowerDelta] delta=50
[eDVBSatelliteEquipmentControl::setRotorTurningSpeed] speed=0
[SecConfigure] Add sat 19
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=19
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 30
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=30
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 48
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=48
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 70
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=70
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 90
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=90
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 100
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=100
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 130
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=130
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 160
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=160
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 192
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=192
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 216
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=216
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 235
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=235
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 255
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=255
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 260
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=260
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 282
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=282
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 305
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=305
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 308
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=308
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 315
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=315
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 330
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=330
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 360
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=360
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 380
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=380
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 390
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=390
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 400
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=400
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 420
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=420
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 450
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=450
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 460
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=460
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 480
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=480
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 500
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=500
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 505
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=505
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 515
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=515
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 520
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=520
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 525
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=525
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 530
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=530
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 549
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=549
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 560
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=560
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 570
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=570
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 585
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=585
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 600
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=600
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 620
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=620
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 642
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=642
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 650
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=650
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 660
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=660
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 685
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=685
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 705
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=705
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 750
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=750
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 765
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=765
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 785
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=785
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 830
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=830
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 850
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=850
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 865
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=865
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 880
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=880
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 900
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=900
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3225
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3225
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3240
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3240
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3255
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3255
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3285
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3285
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3300
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3300
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3325
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3325
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3355
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3355
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3380
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3380
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3400
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3400
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3420
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3420
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3450
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3450
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3460
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3460
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3475
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3475
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3490
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3490
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3520
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3520
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3530
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3530
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3550
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3550
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3560
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3560
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3570
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3570
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] Add sat 3592
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=3592
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[eDVBSatelliteEquipmentControl::setLNBSlotMask] slotmask=3
[SecConfigure] slot: 1 configmode: satposdepends
[SecConfigure] sec config completed
[Picon] adding path: /media/KINGSTON/picon/
Code:[ML] BlurayPlayer not installed: cannot import name BlurayPlayer
[eDVBDB] loading bouquet... /etc/enigma2//bouquets.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe07.tv
[eDVBDB] loading bouquet... /etc/enigma2//alternatives.1_0_1_4290_2BC0_13E_820000_0_0_0_.tv
[eDVBDB] 1 entries in Bouquet alternatives.1_0_1_4290_2BC0_13E_820000_0_0_0_.tv
[eDVBDB] 453 entries in Bouquet userbouquet.dbe07.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe0d.tv
[eDVBDB] 514 entries in Bouquet userbouquet.dbe0d.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe02.tv
[eDVBDB] 79 entries in Bouquet userbouquet.dbe02.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe10.tv
[eDVBDB] 92 entries in Bouquet userbouquet.dbe10.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe0b.tv
[eDVBDB] 233 entries in Bouquet userbouquet.dbe0b.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe0f.tv
[eDVBDB] 28 entries in Bouquet userbouquet.dbe0f.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe04.tv
[eDVBDB] 115 entries in Bouquet userbouquet.dbe04.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe03.tv
[eDVBDB] 95 entries in Bouquet userbouquet.dbe03.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe0c.tv
[eDVBDB] 370 entries in Bouquet userbouquet.dbe0c.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe0e.tv
[eDVBDB] 188 entries in Bouquet userbouquet.dbe0e.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe06.tv
[eDVBDB] 40 entries in Bouquet userbouquet.dbe06.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe05.tv
[eDVBDB] 300 entries in Bouquet userbouquet.dbe05.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe09.tv
[eDVBDB] 197 entries in Bouquet userbouquet.dbe09.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe08.tv
[eDVBDB] 377 entries in Bouquet userbouquet.dbe08.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe00.tv
[eDVBDB] 168 entries in Bouquet userbouquet.dbe00.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe0a.tv
[eDVBDB] 29 entries in Bouquet userbouquet.dbe0a.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe50.tv
[eDVBDB] 328 entries in Bouquet userbouquet.dbe50.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe01.tv
[eDVBDB] 139 entries in Bouquet userbouquet.dbe01.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.tv
[eDVBDB] 0 entries in Bouquet userbouquet.favourites.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.LastScanned.tv
[eDVBDB] 38 entries in Bouquet userbouquet.LastScanned.tv
[eDVBDB] 20 entries in Bouquet bouquets.tv
[eDVBDB] loading bouquet... /etc/enigma2//bouquets.radio
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe00.radio
[eDVBDB] 13 entries in Bouquet userbouquet.dbe00.radio
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.radio
[eDVBDB] 0 entries in Bouquet userbouquet.favourites.radio
[eDVBDB] 2 entries in Bouquet bouquets.radio
[eDVBDB] Renumbering...
[eDVBLocalTimeHandler] disable sync local time with transponder time!
[FONT] adding font /usr/share/fonts/nmsbd.ttf -> Regular
[FONT] adding font /usr/share/fonts/andale.ttf -> Fixed
[FONT] adding font /usr/share/fonts/tuxtxt.ttf -> Console
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf -> Replacement
[SKIN] loading include: /usr/share/enigma2/PLi-FullNightHD/skin_templates.xml
[SKIN] loading include: /usr/share/enigma2/PLi-FullNightHD/skin_plugins.xml
[FONT] adding font /usr/share/fonts/LiberationSans-Regular.ttf -> Regular
[FONT] adding font /usr/share/fonts/lcd.ttf -> LCD
[FONT] adding font /usr/share/fonts/tuxtxt.ttf -> Console
[FONT] adding font /usr/share/fonts/andale.ttf -> Fixed
[FONT] adding font /usr/share/fonts/LiberationSans-Regular.ttf -> Subs
[FONT] adding font /usr/share/fonts/LiberationSans-Italic.ttf -> Subsi
[FONT] adding font /usr/share/fonts/LiberationSans-Bold.ttf -> Subsb
[FONT] adding font /usr/share/fonts/LiberationSans-BoldItalic.ttf -> Subsz
Unknown device type: front panel
[iInputDevices] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
--> setting scaler_sharpness to: 0000000D
[eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
[eTuxttxtApp] enable caching
[keymapparser] keymap file /usr/share/enigma2/keytranslation.xml not found
[Console] command: ('/sbin/ip', '/sbin/ip', '-o', 'addr', 'show', 'dev', 'eth0')
[eConsoleAppContainer] Starting /sbin/ip
[eDboxLCD] setLCDBrightness 25
[eDboxLCD] setLCDBrightness 127
[CI] FIXME: request for unknown slot
[CI] FIXME: request for unknown slot
[FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/SDGRadio/fonts/mssdr-digitali.ttf -> Digital
[EPGImport] fallback to default translation for always
[EPGImport] fallback to default translation for only manual boot
[EPGImport] fallback to default translation for only automatic boot
[EPGImport] fallback to default translation for never
[EPGImport] fallback to default translation for wake up and import
[EPGImport] fallback to default translation for skip the import
[EPGImport] fallback to default translation for Press OK
[EPGImport] fallback to default translation for Monday
[EPGImport] fallback to default translation for Tuesday
[EPGImport] fallback to default translation for Wednesday
[EPGImport] fallback to default translation for Thursday
[EPGImport] fallback to default translation for Friday
[EPGImport] fallback to default translation for Saturday
[EPGImport] fallback to default translation for Sunday
[EPGImport] fallback to default translation for EPGImport
[EPGImport] fallback to default translation for EPGImport
getFPVersion failed!
[OpenWebif] -D- tuner '0' 'AVL2108' 'Tuner A'
[OpenWebif] -D- tuner '1' 'AVL2108' 'Tuner B'
Plugin Extensions/WebInterface failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
[MovieCut] set language to pl
[MovieCut] set language to pl
[VideoHardware] getModeList for port DVI-PC
[VideoHardware] remove DVI-PC because of not existing modes
[VideoHardware] getModeList for port Scart
[VideoHardware] getModeList for port YPbPr
[VideoHardware] getModeList for port Scart
[VideoHardware] getModeList for port DVI
[VideoHardware] hotplug on dvi
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 letterbox letterbox auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 letterbox letterbox auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 letterbox letterbox auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 letterbox letterbox auto
[VideoHardware] setMode - port: DVI mode: 1080i rate: multi
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 letterbox letterbox auto
[EPGImport] autostart (0) occured at 1513796604.51
[TIMER] record time changed, start prepare is now: Wed Dec 13 20:56:40 2017
[TimerSanityCheck] timer is finished!
[Timer] Record RecordTimerEntry(name=Victoria 2, begin=Wed Dec 13 20:57:00 2017, serviceref=1:0:1:E0A:2D50:13E:820000:0:0:0:, justplay=0)
[EPGImport] autostart (0) occured at 1513796604.68
[EPGImport] WakeUpTime now set to 1513838730 (now=1513796604)
[SKIN] No skin to read...
[eEPGCache] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[eEPGCache] time updated.. start EPG Mainloop
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
[SKIN] Parsing embedded skin <embedded-in-'HideVBILine'>
RemovePopup, id = ZapError
setValue 30
[eDVBVolumecontrol] Setvolume: raw: 30 30, -1db: 45 45
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Console] command: /usr/sbin/ntpdate -s -u pool.ntp.org
[eConsoleAppContainer] Starting /bin/sh
playing 1:0:1:7D3:22C4:13E:820000:0:0:0:
[gRC] main thread is non-idle! display spinner!
[eEPGCache] 333877 events read from /hdd/epg.dat
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBResourceManager] allocate channel.. 22c4:013e
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 130 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] satpos depends
[eDVBSatelliteEquipmentControl] ret3 10000
[eDVBSatelliteEquipmentControl] ret4 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] final score 9935
[eDVBSatelliteEquipmentControl] direct_connected 0
[eDVBSatelliteEquipmentControl] canTune 2
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 130 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] satpos depends
[eDVBSatelliteEquipmentControl] ret4 0
[eDVBSatelliteEquipmentControl] ret5 0
[eDVBSatelliteEquipmentControl] ret 0, score old 0
[eDVBSatelliteEquipmentControl] score new 0
[eDVBSatelliteEquipmentControl] final score 0
[eDVBFrontend] opening frontend 0
[eDVBFrontend] (0)tune
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 130 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] satpos depends
[eDVBSatelliteEquipmentControl] ret3 10000
[eDVBSatelliteEquipmentControl] ret4 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] final score 9935
[eDVBSatelliteEquipmentControl] Entry for 13,0? not in Rotor Table found... i try gotoXX?
[eDVBSatelliteEquipmentControl] siteLatitude = 53.687000, siteLongitude = 21.771999, 13.000000 degrees
[eDVBSatelliteEquipmentControl] PolarmountHourAngle=189.629327
[eDVBSatelliteEquipmentControl] RotorCmd = d09a
[eDVBSatelliteEquipmentControl] RotorCmd d09a, lastRotorCmd ffffffff
[eDVBSatelliteEquipmentControl] set rotor timeout to 360 seconds
[eDVBFrontend] prepare_sat System 1 Freq 12475500 Pol 0 SR 29900000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0, is_id -1, pls_mode 0, pls_code 1
[eDVBFrontend] tuning to 1875 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:7D3:22C4:13E:820000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=-1 fesource=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[Avahi] watch activated: 0x1
[Console] finished: /usr/sbin/ntpdate -s -u pool.ntp.org
[Console] finished: ('/sbin/ip', '/sbin/ip', '-o', 'addr', 'show', 'dev', 'eth0')
[Console] command: route -n | grep eth0
[eConsoleAppContainer] Starting /bin/sh
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend] set static current limiting
[Console] finished: route -n | grep eth0
0.0.0.0
192.168
nameservers: [[37, 8, 214, 2], [31, 11, 202, 254]]
read configured interface: {'bnep0': {'dhcp': True}, 'usb0': {'dhcp': False}, 'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'atml0': {'dhcp': True}, 'eth1': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 106], 'up': True, 'mac': '00:16:b4:03:9f:97', 'dhcp': True, 'bcast': [255, 255, 255, 255], 'netmask': [255, 255, 0,
0], 'gateway': [192, 168, 1, 1]}}
SerienRecorder plugin not found
EPG Refresh Plugin not found
[OpenWebif] no plugins to load
[OpenWebif] started on 20000
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Registered et9x00 (_http._tcp) on et9x00:20000
[OpenWebif] port 80 busy
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend] set sequence pos 3
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend] setVoltage 1
[Avahi] timeout elapsed
[Avahi] Resolving service 'et9x00' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend] sleep 900ms
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Avahi] watch activated: 0x1
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] watch activated: 0x1
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend] set sequence pos 9
[eDVBFrontend] invalidate current rotorparams
[eDVBFrontend] sendDiseqc: e0316ed09a(?)
[eDVBFrontend] sleep 1000ms
[eDVBFrontend] sleep 2000ms
[eDVBFrontend] setVoltage 2
[eDVBFrontend] setTone 1
[eDVBFrontend] sleep 10ms
[eDVBFrontend] setFrontend 0
[eDVBFrontend] setting frontend 0
[eDVBFrontend] set timeout 1440
[eDVBFrontend] sleep 250ms
[eDVBFrontend] locked step 0 ok
[eDVBFrontend] set sequence pos -3
[eDVBFrontend] sleep 250ms
[eDVBFrontend] locked step 1 ok
[eDVBFrontend] set sequence pos -3
[eDVBFrontend] sleep 250ms
[eDVBFrontend] locked step 2 ok
[eDVBFrontend] set sequence pos -3
[eDVBFrontend] sleep 250ms
[eDVBFrontend] locked step 3 ok
[eDVBFrontend] set sequence pos -3
[eDVBFrontend] sleep 250ms
[eDVBFrontend] locked step 4 ok
[eDVBFrontend] ok > 4 .. goto 3
[eDVBFrontend] set sequence pos 3
[eDVBChannel] OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1374ec0 running
[eEPGCache] channel 0x1374ec0 running
[eDVBChannel] getDemux cap=00
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBResourceManager] stop release channel timer
[eDVBChannel] getDemux cap=01
[eDVBResourceManager] allocate demux cap=01
[eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=0
[eDVBServicePMTHandler] ok ... now we start!!
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (07ef), and 1 audio stream(s) (07f0), and the pcr pid is 07ef, and the text pid is ffffffff
[eDVBChannel] getDemux cap=01
[eEPGCache] next update in 2 sec
[eTSMPEGDecoder] decoder state: play, vpid=07ef, apid=07f0
[eDVBPCR0] DMX_SET_PES_FILTER pid=0x07ef ok
[eDVBPCR0] DEMUX_START ok
[eDVBAudio0] DMX_SET_PES_FILTER pid=0x07f0 ok
[eDVBAudio0] DEMUX_START ok
[eDVBAudio0] AUDIO_SET_BYPASS bypass=1 ok
[eDVBAudio0] AUDIO_PAUSE ok
[eDVBAudio0] AUDIO_PLAY ok
[eDVBVideo] Video Device: /dev/dvb/adapter0/video0
[eDVBVideo] demux device: /dev/dvb/adapter0/demux0
[eDVBVideo0] VIDEO_SET_STREAMTYPE 1 - ok
[eDVBVideo0] DMX_SET_PES_FILTER pid=0x07ef ok
[eDVBVideo0] DEMUX_START ok
[eDVBVideo0] VIDEO_FREEZE ok
[eDVBVideo0] VIDEO_PLAY ok
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBAudio0] AUDIO_CHANNEL_SELECT 0 ok
[eDVBTeletextParser] Starting!
[eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] created teletext subtitle PES reader!
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] starting PES reader on pid=ffffffff
[eDVBCAService] new service 1:0:1:7D3:22C4:13E:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:7D3:22C4:13E:820000:0:0:0:
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
RemovePopup, id = ZapError
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] use pmtpid 07ee for service_id 07d3
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2030
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBFrontend] update current rotorparams 1435 d09a 130
[eDVBFrontend] set sequence pos 4
[eDVBFrontend] update current switch params
[eDVBFrontend] sleep 500ms
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (07ef), and 1 audio stream(s) (07f0), and the pcr pid is 07ef, and the text pid is ffffffff
[eTSMPEGDecoder] decoder state: play, vpid=07ef, apid=07f0
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBCIInterfaces] gotPMT
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2030
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2010
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBServicePMTHandler] sdt update done!
[eDVBFrontend] set dynamic current limiting
[eDVBVideo0] VIDEO_GET_EVENT FRAME_RATE_CHANGED 25000 fps
[eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 1920x1080 aspect 3
[eDVBVideo0] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 0
[eEPGCache] start caching events(1513796626)
[eDVBSectionReader] DMX_SET_FILTER pid=211
[eDVBSectionReader] DMX_SET_FILTER pid=561
[eDVBSectionReader] DMX_SET_FILTER pid=3842
[eDVBSectionReader] DMX_SET_FILTER pid=3003
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=57
[eEPGCache] abort non avail schedule other reading
[eEPGCache] abort non avail netmed schedule reading
[eEPGCache] abort non avail netmed schedule other reading
[eEPGCache] abort non avail FreeSat schedule_other reading
[eEPGCache] abort non avail viasat reading
[eEPGCache] abort non avail mhw reading
[eEPGCache] nownext finished(1513796634)
[eEPGCache] schedule finished(1513796636)
[eEPGCache] stop caching events(1513796636)
[eEPGCache] next update in 60 min
[eHdmiCEC] received message A0 00 80 45 20 00 00
[eHdmiCEC] received message A0 00 80 45 20 00 00
[eHdmiCEC] received message 83
[eHdmiCEC] send message 84 20 00 01
[eHdmiCEC] received message 8C
[eHdmiCEC] send message 87 00 00 00
[eHdmiCEC] received message 8C
[eHdmiCEC] send message 87 00 00 00
[eHdmiCEC] received message 8C
[eHdmiCEC] send message 87 00 00 00
[eHdmiCEC] received message 80 00 00 20 00
[eHdmiCEC] received message 86 20 00
[eHdmiCEC] send message 82 20 00
action -> InfobarActions showMovies
[eDVBServicePlay] timeshift
action -> OkCancelActions ok
[eDVBServicePlay] timeshift
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
[SKIN] Parsing embedded skin <embedded-in-'HideVBILine'>
not pauseable.
RemovePopup, id = ZapError
playing 1:0:0:0:0:0:0:0:0:0:/hdd/movie/20171203 1157 - VOD 207 - Dyktator.ts
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:7D3:22C4:13E:820000:0:0:0:
[eDVBCAService] free service 1:0:1:7D3:22C4:13E:820000:0:0:0:
[eDVBServicePlay] timeshift
[eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
[eDVBPCR0] DEMUX_STOP ok
[eDVBPCR0] destroy
[eDVBVideo0] DEMUX_STOP ok
[eDVBVideo0] VIDEO_STOP ok
[eDVBVideo0] destroy
[eDVBAudio0] AUDIO_STOP ok
[eDVBAudio0] DEMUX_STOP ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBAudio0] destroy
[eDVBResourceManager] start release channel timer
[eDVBServicePMTHandler] alloc PVR
[eDVBLocalTimerHandler] remove channel 0x1374ec0
[eEPGCache] remove channel 0x1374ec0
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=6, source=-1 fesource=-1
[eDVBDemux] open demux /dev/dvb/adapter0/demux6
[eDVBDemux] DMX_SET_SOURCE dvr6 failed: Invalid argument
[eDVBTSTools] setSource loading streaminfo for /hdd/movie/20171203 1157 - VOD 207 - Dyktator.ts
[eDVBDemux] open dvr /dev/dvb/adapter0/dvr6
[eDVBServicePlay] cuts file has 3 entries
[eDVBTSTools] calcBegin [@ML] m_streaminfo.getLastFrame returned 117312, 3483842268 (38709s), fixup to: 117312, 65508 (0s)
[eDVBServicePMTHandler] ok ... now we start!!
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (0112), and 1 audio stream(s) (0212), and the pcr pid is 0112, and the text pid is ffffffff
[setIoPrio] best-effort level 0 ok
[eFilePushThread] START thread
[eTSMPEGDecoder] decoder state: play, vpid=0112, apid=0212
[eDVBAudio0] DMX_SET_PES_FILTER pid=0x0212 ok
[eDVBAudio0] DEMUX_START ok
[eDVBAudio0] AUDIO_SET_BYPASS bypass=1 ok
[eDVBAudio0] AUDIO_PAUSE ok
[eDVBAudio0] AUDIO_PLAY ok
[eDVBVideo] Video Device: /dev/dvb/adapter0/video0
[eDVBVideo] demux device: /dev/dvb/adapter0/demux6
[eDVBVideo0] VIDEO_SET_STREAMTYPE 1 - ok
[eDVBVideo0] DMX_SET_PES_FILTER pid=0x0112 ok
[eDVBVideo0] DEMUX_START ok
[eDVBVideo0] VIDEO_FREEZE ok
[eDVBVideo0] VIDEO_PLAY ok
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBTeletextParser] Starting!
[eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux6
[eDVBTeletextParser] created teletext subtitle PES reader!
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux6
[eDVBTeletextParser] starting PES reader on pid=ffffffff
[eDVBServicePlay] seekTo 0
[eDVBChannel] seek.
[eFilePushThread] waiting for pause
[eFilePushThread] PAUSED
[eDVBAudio0] AUDIO_CLEAR_BUFFER ok
[eDVBVideo0] VIDEO_CLEAR_BUFFER ok
[eDVBChannel] ok, resolved skip (rel: 0, diff 0), now at 00000000
[eDVBDemux] open demux /dev/dvb/adapter0/demux6
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux6
[eDVBSectionReader] DMX_SET_FILTER pid=18
RemovePopup, id = ZapError
resolved to PLAY
[eDVBServicePlay] unpause
new service started! trying to download cuts!
seekable.getLength() returns: [0, 458668947L]
RemovePopup, id = ZapError
[eDVBChannel] pvrEvent evtStopped
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] no PAT entry found.. start delay
[eDVBDemux] open demux /dev/dvb/adapter0/demux6
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBServicePlay] DVB service failed to tune - error 3
[DVBCAHandler] no more services
[eDVBFrontend] close frontend 0
^C
Ok, now try again with descramble incoming http stream and post results.Code:[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=6, source=-1 fesource=-1
[eDVBDemux] open demux /dev/dvb/adapter0/demux6
[eDVBDemux] DMX_SET_SOURCE dvr6 failed: Invalid argument
[eDVBTSTools] setSource loading streaminfo for /hdd/movie/20171203 1157 - VOD 207 - Dyktator.ts
[eDVBDemux] open dvr /dev/dvb/adapter0/dvr6
I'm afraid it still does not work but I have not restarted Enigma - is it required?
I may be able to post the results later today but to me it seems like the time the recording was made (15:45:34 in my screenshot) is displayed instead of 0:00 for the beginning of the recording.
This also causes some weird numbers on the box display. In this case it is like this:
945:34 +-861
I would say something has gone wrong in the image and I need a re-flash.
Please post results, i need to understand from the logs, above you can clearly see the error with bold red.
I'm afraid the same error is still there:
Code:(...)
[eDVBLocalTimeHandler] disable sync local time with transponder time!
[FONT] adding font /usr/share/fonts/nmsbd.ttf -> Regular
[FONT] adding font /usr/share/fonts/andale.ttf -> Fixed
[FONT] adding font /usr/share/fonts/tuxtxt.ttf -> Console
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf -> Replacement
[SKIN] loading include: /usr/share/enigma2/PLi-FullNightHD/skin_templates.xml
[SKIN] loading include: /usr/share/enigma2/PLi-FullNightHD/skin_plugins.xml
[FONT] adding font /usr/share/fonts/LiberationSans-Regular.ttf -> Regular
[FONT] adding font /usr/share/fonts/lcd.ttf -> LCD
[FONT] adding font /usr/share/fonts/tuxtxt.ttf -> Console
[FONT] adding font /usr/share/fonts/andale.ttf -> Fixed
[FONT] adding font /usr/share/fonts/LiberationSans-Regular.ttf -> Subs
[FONT] adding font /usr/share/fonts/LiberationSans-Italic.ttf -> Subsi
[FONT] adding font /usr/share/fonts/LiberationSans-Bold.ttf -> Subsb
[FONT] adding font /usr/share/fonts/LiberationSans-BoldItalic.ttf -> Subsz
Unknown device type: front panel
[iInputDevices] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
--> setting scaler_sharpness to: 0000000D
[eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
[eTuxttxtApp] enable caching
[keymapparser] keymap file /usr/share/enigma2/keytranslation.xml not found
[Console] command: ('/sbin/ip', '/sbin/ip', '-o', 'addr', 'show', 'dev', 'eth0')
[eConsoleAppContainer] Starting /sbin/ip
[eDboxLCD] setLCDBrightness 25
[eDboxLCD] setLCDBrightness 127
[CI] FIXME: request for unknown slot
[CI] FIXME: request for unknown slot
[FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/SDGRadio/fonts/mssdr-digitali.ttf -> Digital
[EPGImport] fallback to default translation for always
[EPGImport] fallback to default translation for only manual boot
[EPGImport] fallback to default translation for only automatic boot
[EPGImport] fallback to default translation for never
[EPGImport] fallback to default translation for wake up and import
[EPGImport] fallback to default translation for skip the import
[EPGImport] fallback to default translation for Press OK
[EPGImport] fallback to default translation for Monday
[EPGImport] fallback to default translation for Tuesday
[EPGImport] fallback to default translation for Wednesday
[EPGImport] fallback to default translation for Thursday
[EPGImport] fallback to default translation for Friday
[EPGImport] fallback to default translation for Saturday
[EPGImport] fallback to default translation for Sunday
[EPGImport] fallback to default translation for EPGImport
[EPGImport] fallback to default translation for EPGImport
getFPVersion failed!
[OpenWebif] -D- tuner '0' 'AVL2108' 'Tuner A'
[OpenWebif] -D- tuner '1' 'AVL2108' 'Tuner B'
Plugin Extensions/WebInterface failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
[MovieCut] set language to pl
[MovieCut] set language to pl
[VideoHardware] getModeList for port DVI-PC
[VideoHardware] remove DVI-PC because of not existing modes
[VideoHardware] getModeList for port Scart
[VideoHardware] getModeList for port YPbPr
[VideoHardware] getModeList for port Scart
[VideoHardware] getModeList for port DVI
[VideoHardware] hotplug on dvi
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 letterbox letterbox auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 letterbox letterbox auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 letterbox letterbox auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 letterbox letterbox auto
[VideoHardware] setMode - port: DVI mode: 1080i rate: multi
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 letterbox letterbox auto
[EPGImport] autostart (0) occured at 1513800292.99
[TIMER] record time changed, start prepare is now: Wed Dec 13 20:56:40 2017
[TimerSanityCheck] timer is finished!
[Timer] Record RecordTimerEntry(name=Victoria 2, begin=Wed Dec 13 20:57:00 2017, serviceref=1:0:1:E0A:2D50:13E:820000:0:0:0:, justplay=0)
[EPGImport] autostart (0) occured at 1513800293.16
[EPGImport] WakeUpTime now set to 1513838730 (now=1513800293)
[SKIN] No skin to read...
[eEPGCache] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[eEPGCache] time updated.. start EPG Mainloop
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
[SKIN] Parsing embedded skin <embedded-in-'HideVBILine'>
RemovePopup, id = ZapError
setValue 30
[eDVBVolumecontrol] Setvolume: raw: 30 30, -1db: 45 45
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Console] command: /usr/sbin/ntpdate -s -u pool.ntp.org
[eConsoleAppContainer] Starting /bin/sh
playing 1:0:1:7D3:22C4:13E:820000:0:0:0:
[gRC] main thread is non-idle! display spinner!
[eEPGCache] 330906 events read from /hdd/epg.dat
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBResourceManager] allocate channel.. 22c4:013e
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 130 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] satpos depends
[eDVBSatelliteEquipmentControl] ret3 10000
[eDVBSatelliteEquipmentControl] ret4 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] final score 9935
[eDVBSatelliteEquipmentControl] direct_connected 0
[eDVBSatelliteEquipmentControl] canTune 2
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 130 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] satpos depends
[eDVBSatelliteEquipmentControl] ret4 0
[eDVBSatelliteEquipmentControl] ret5 0
[eDVBSatelliteEquipmentControl] ret 0, score old 0
[eDVBSatelliteEquipmentControl] score new 0
[eDVBSatelliteEquipmentControl] final score 0
[eDVBFrontend] opening frontend 0
[eDVBFrontend] (0)tune
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 130 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] satpos depends
[eDVBSatelliteEquipmentControl] ret3 10000
[eDVBSatelliteEquipmentControl] ret4 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] final score 9935
[eDVBSatelliteEquipmentControl] Entry for 13,0? not in Rotor Table found... i try gotoXX?
[eDVBSatelliteEquipmentControl] siteLatitude = 53.687000, siteLongitude = 21.771999, 13.000000 degrees
[eDVBSatelliteEquipmentControl] PolarmountHourAngle=189.629327
[eDVBSatelliteEquipmentControl] RotorCmd = d09a
[eDVBSatelliteEquipmentControl] RotorCmd d09a, lastRotorCmd ffffffff
[eDVBSatelliteEquipmentControl] set rotor timeout to 360 seconds
[eDVBFrontend] prepare_sat System 1 Freq 12475500 Pol 0 SR 29900000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0, is_id -1, pls_mode 0, pls_code 1
[eDVBFrontend] tuning to 1875 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:7D3:22C4:13E:820000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=-1 fesource=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[Avahi] watch activated: 0x1
[Console] finished: /usr/sbin/ntpdate -s -u pool.ntp.org
[Console] finished: ('/sbin/ip', '/sbin/ip', '-o', 'addr', 'show', 'dev', 'eth0')
[Console] command: route -n | grep eth0
[eConsoleAppContainer] Starting /bin/sh
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend] set static current limiting
[Console] finished: route -n | grep eth0
0.0.0.0
192.168
nameservers: [[37, 8, 214, 2], [31, 11, 202, 254]]
read configured interface: {'bnep0': {'dhcp': True}, 'usb0': {'dhcp': False}, 'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'atml0': {'dhcp': True}, 'eth1': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 106], 'up': True, 'mac': '00:16:b4:03:9f:97', 'dhcp': True, 'bcast': [255, 255, 255, 255], 'netmask': [255, 255, 0, 0], 'gateway': [192, 168, 1, 1]}}
SerienRecorder plugin not found
EPG Refresh Plugin not found
[OpenWebif] no plugins to load
[OpenWebif] started on 20000
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Registered et9x00 (_http._tcp) on et9x00:20000
[OpenWebif] port 80 busy
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend] set sequence pos 3
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend] setVoltage 1
[Avahi] timeout elapsed
[Avahi] Resolving service 'et9x00' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend] sleep 900ms
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Avahi] watch activated: 0x1
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend] set sequence pos 9
[eDVBFrontend] invalidate current rotorparams
[eDVBFrontend] sendDiseqc: e0316ed09a(?)
[eDVBFrontend] sleep 1000ms
[Avahi] watch activated: 0x1
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend] sleep 2000ms
[eDVBFrontend] setVoltage 2
[eDVBFrontend] setTone 1
[eDVBFrontend] sleep 10ms
[eDVBFrontend] setFrontend 0
[eDVBFrontend] setting frontend 0
[eDVBFrontend] set timeout 1440
[eDVBFrontend] sleep 250ms
[eDVBFrontend] locked step 0 ok
[eDVBFrontend] set sequence pos -3
[eDVBFrontend] sleep 250ms
[eDVBFrontend] locked step 1 ok
[eDVBFrontend] set sequence pos -3
[eDVBFrontend] sleep 250ms
[eDVBFrontend] locked step 2 ok
[eDVBFrontend] set sequence pos -3
[eDVBFrontend] sleep 250ms
[eDVBFrontend] locked step 3 ok
[eDVBFrontend] set sequence pos -3
[eDVBFrontend] sleep 250ms
[eDVBFrontend] locked step 4 ok
[eDVBFrontend] ok > 4 .. goto 3
[eDVBFrontend] set sequence pos 3
[eDVBChannel] OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1365d68 running
[eEPGCache] channel 0x1365d68 running
[eDVBChannel] getDemux cap=00
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBResourceManager] stop release channel timer
[eDVBChannel] getDemux cap=01
[eDVBResourceManager] allocate demux cap=01
[eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=0
[eDVBServicePMTHandler] ok ... now we start!!
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (07ef)[eEPGCache] next update in 2 sec
, and 1 audio stream(s) (07f0), and the pcr pid is 07ef, and the text pid is ffffffff
[eDVBChannel] getDemux cap=01
[eTSMPEGDecoder] decoder state: play, vpid=07ef, apid=07f0
[eDVBPCR0] DMX_SET_PES_FILTER pid=0x07ef ok
[eDVBPCR0] DEMUX_START ok
[eDVBAudio0] DMX_SET_PES_FILTER pid=0x07f0 ok
[eDVBAudio0] DEMUX_START ok
[eDVBAudio0] AUDIO_SET_BYPASS bypass=1 ok
[eDVBAudio0] AUDIO_PAUSE ok
[eDVBAudio0] AUDIO_PLAY ok
[eDVBVideo] Video Device: /dev/dvb/adapter0/video0
[eDVBVideo] demux device: /dev/dvb/adapter0/demux0
[eDVBVideo0] VIDEO_SET_STREAMTYPE 1 - ok
[eDVBVideo0] DMX_SET_PES_FILTER pid=0x07ef ok
[eDVBVideo0] DEMUX_START ok
[eDVBVideo0] VIDEO_FREEZE ok
[eDVBVideo0] VIDEO_PLAY ok
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBAudio0] AUDIO_CHANNEL_SELECT 0 ok
[eDVBTeletextParser] Starting!
[eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] created teletext subtitle PES reader!
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] starting PES reader on pid=ffffffff
[eDVBCAService] new service 1:0:1:7D3:22C4:13E:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:7D3:22C4:13E:820000:0:0:0:
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
RemovePopup, id = ZapError
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] use pmtpid 07ee for service_id 07d3
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2030
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBFrontend] update current rotorparams 1435 d09a 130
[eDVBFrontend] set sequence pos 4
[eDVBFrontend] update current switch params
[eDVBFrontend] sleep 500ms
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2010
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (07ef), and 1 audio stream(s) (07f0), and the pcr pid is 07ef, and the text pid is ffffffff
[eTSMPEGDecoder] decoder state: play, vpid=07ef, apid=07f0
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBCIInterfaces] gotPMT
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2030
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2020
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2030
[eDVBServicePMTHandler] sdt update done!
[eDVBFrontend] set dynamic current limiting
[eDVBVideo0] VIDEO_GET_EVENT FRAME_RATE_CHANGED 25000 fps
[eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 1920x1080 aspect 3
[eDVBVideo0] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 0
[eEPGCache] start caching events(1513800314)
[eDVBSectionReader] DMX_SET_FILTER pid=211
[eDVBSectionReader] DMX_SET_FILTER pid=561
[eDVBSectionReader] DMX_SET_FILTER pid=3842
[eDVBSectionReader] DMX_SET_FILTER pid=3003
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=57
[eEPGCache] abort non avail schedule other reading
[eEPGCache] abort non avail netmed schedule reading
[eEPGCache] abort non avail netmed schedule other reading
[eEPGCache] abort non avail FreeSat schedule_other reading
[eEPGCache] abort non avail viasat reading
[eEPGCache] abort non avail mhw reading
[eEPGCache] nownext finished(1513800321)
[eEPGCache] schedule finished(1513800331)
[eEPGCache] stop caching events(1513800331)
[eEPGCache] next update in 60 min
[eHdmiCEC] received message A0 00 80 45 20 00 00
[eHdmiCEC] received message A0 00 80 45 20 00 00
[eHdmiCEC] received message 83
[eHdmiCEC] send message 84 20 00 01
[eHdmiCEC] received message 8C
[eHdmiCEC] send message 87 00 00 00
[eHdmiCEC] received message 8C
[eHdmiCEC] send message 87 00 00 00
[eHdmiCEC] received message 8C
[eHdmiCEC] send message 87 00 00 00
action -> InfobarActions showMovies
[eDVBServicePlay] timeshift
[eHdmiCEC] received message 80 00 00 20 00
[eHdmiCEC] received message 86 20 00
[eHdmiCEC] send message 82 20 00
action -> DirectionActions left
unknown action DirectionActions/left! typo in keymap?
action -> DirectionActions leftUp
unknown action DirectionActions/leftUp! typo in keymap?
action -> DirectionActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> DirectionActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> DirectionActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> OkCancelActions ok
[eDVBServicePlay] timeshift
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
[SKIN] Parsing embedded skin <embedded-in-'HideVBILine'>
not pauseable.
RemovePopup, id = ZapError
playing 1:0:0:0:0:0:0:0:0:0:/hdd/movie/20171203 1157 - VOD 207 - Dyktator.ts
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:7D3:22C4:13E:820000:0:0:0:
[eDVBCAService] free service 1:0:1:7D3:22C4:13E:820000:0:0:0:
[eDVBServicePlay] timeshift
[eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
[eDVBPCR0] DEMUX_STOP ok
[eDVBPCR0] destroy
[eDVBVideo0] DEMUX_STOP ok
[eDVBVideo0] VIDEO_STOP ok
[eDVBVideo0] destroy
[eDVBAudio0] AUDIO_STOP ok
[eDVBAudio0] DEMUX_STOP ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBAudio0] destroy
[eDVBResourceManager] start release channel timer
[eDVBServicePMTHandler] alloc PVR
[eDVBLocalTimerHandler] remove channel 0x1365d68
[eEPGCache] remove channel 0x1365d68
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=6, source=-1 fesource=-1
[eDVBDemux] open demux /dev/dvb/adapter0/demux6
[eDVBDemux] DMX_SET_SOURCE dvr6 failed: Invalid argument
[eDVBTSTools] setSource loading streaminfo for /hdd/movie/20171203 1157 - VOD 207 - Dyktator.ts
[eDVBDemux] open dvr /dev/dvb/adapter0/dvr6
[eDVBServicePlay] cuts file has 3 entries
[eDVBTSTools] calcBegin [@ML] m_streaminfo.getLastFrame returned 117312, 3483842268 (38709s), fixup to: 117312, 65508 (0s)
[eDVBServicePMTHandler] ok ... now we start!!
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[setIoPrio] best-effort level 0 ok
[eFilePushThread] START thread
[eDVBServicePlay] have 1 video stream(s) (0112), and 1 audio stream(s) (0212), and the pcr pid is 0112, and the text pid is ffffffff
[eTSMPEGDecoder] decoder state: play, vpid=0112, apid=0212
[eDVBAudio0] DMX_SET_PES_FILTER pid=0x0212 ok
[eDVBAudio0] DEMUX_START ok
[eDVBAudio0] AUDIO_SET_BYPASS bypass=1 ok
[eDVBAudio0] AUDIO_PAUSE ok
[eDVBAudio0] AUDIO_PLAY ok
[eDVBVideo] Video Device: /dev/dvb/adapter0/video0
[eDVBVideo] demux device: /dev/dvb/adapter0/demux6
[eDVBVideo0] VIDEO_SET_STREAMTYPE 1 - ok
[eDVBVideo0] DMX_SET_PES_FILTER pid=0x0112 ok
[eDVBVideo0] DEMUX_START ok
[eDVBVideo0] VIDEO_FREEZE ok
[eDVBVideo0] VIDEO_PLAY ok
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBTeletextParser] Starting!
[eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux6
[eDVBTeletextParser] created teletext subtitle PES reader!
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux6
[eDVBTeletextParser] starting PES reader on pid=ffffffff
[eDVBServicePlay] seekTo 0
[eDVBChannel] seek.
[eFilePushThread] waiting for pause
[eFilePushThread] PAUSED
[eDVBAudio0] AUDIO_CLEAR_BUFFER ok
[eDVBVideo0] VIDEO_CLEAR_BUFFER ok
[eDVBChannel] ok, resolved skip (rel: 0, diff 0), now at 00000000
[eDVBDemux] open demux /dev/dvb/adapter0/demux6
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux6
[eDVBSectionReader] DMX_SET_FILTER pid=18
RemovePopup, id = ZapError
resolved to PLAY
[eDVBServicePlay] unpause
new service started! trying to download cuts!
seekable.getLength() returns: [0, 458668947L]
RemovePopup, id = ZapError
[eDVBChannel] pvrEvent evtStopped
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] no PAT entry found.. start delay
[eDVBDemux] open demux /dev/dvb/adapter0/demux6
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBServicePlay] DVB service failed to tune - error 3
[DVBCAHandler] no more services
[eDVBFrontend] close frontend 0
Have you enabled that option?
When enabled, always descramble receiving http streams. This takes up more resources (descrambling demuxers), only enable if necessary. Individual streams are always descrambled if 0x100 is added to the service type, regardless of this setting. Default off.
Code:fgrep config.streaming.descramble_client /etc/enigma2/settings
Yes:
config.streaming.descramble_client=true
Try an online update and report again.
Following the online update playback works irrespective of the http stream descrambling setting. :)
After the online update, however, it looks like my oscam-emu does not start automatically after box switch-off/on.
It does not even start when restarted from the menu.
CCcam works all right.
Something must be screwed up in the file:
#!/bin/sh
case "$1" in
start)
ulimit -s 1024
/usr/bin/oscam-emu --config-dir /etc/tuxbox/config/oscam-emu --daemon --pidfile /tmp/oscam-emu.pid --restart 2 --utf8
;;
stop)
kill `cat /tmp/oscam-emu.pid` 2> /dev/null
;;
restart|reload)
$0 stop
sleep 1
$0 start
;;
version)
echo "svn11394"
;;
info)
echo "oscam-emu svn11394"
;;
*)
echo "Usage: $0 start|stop|restart"
exit 1
;;
esac
exit 0
This one starts OK:
#!/bin/sh
case "$1" in
start)
ulimit -s 1024
exec start-stop-daemon -S -x /usr/bin/CCcam230
;;
stop)
exec start-stop-daemon -K -R 2 -x /usr/bin/CCcam230
;;
restart|reload)
$0 stop
sleep 1
$0 start
;;
version)
echo "2.3.0"
;;
info)
echo "CCcam 2.3.0"
;;
*)
echo "Usage: $0 start|stop|restart"
exit 1
;;
esac
exit 0
If you manually run it, there is an error?
Check logs.Code:/usr/bin/oscam-emu --config-dir /etc/tuxbox/config/oscam-emu --pidfile /tmp/oscam-emu.pid --restart 2 --utf8
root@et9x00:~# /usr/bin/oscam-emu --config-dir /etc/tuxbox/config/oscam-emu --pidfile /tmp/oscam-emu.pid --restart 2 --utf8
WARNING: Web interface UTF-8 mode enabled. Carefully read documentation as bugs may arise.
*** Error in `/usr/bin/oscam-emu': double free or corruption (fasttop): 0x76d025d0 ***
root@et9x00:~#
It seems that oscam-emu is crashing!
There is an update available, try with svn11397-r765.
It seems to have helped. :)