OTT (DVB-MPE)

Printable View

Show 40 post(s) from this thread on one page

06-10-18, 23:14
EnoSat

OTT (DVB-MPE)

now NC+ tested OTT from 13E/12577H (pid 2009 & 2010)
https://satkurier.pl/news/174456/kan...tp-na-13e.html
https://www.parabola.cz/zpravicky/29...eho-tp-na-13e/
07-10-18, 21:02
athoik

Απ: OTT (DVB-MPE)

Interesting, will check them tomorrow!
07-10-18, 21:22
mcelliot_g

Re: OTT (DVB-MPE)

There are other OTT DVB-MPE transmissions as well. Yes, these will be very interesting to manage to watch!
08-10-18, 20:34
athoik

Απ: OTT (DVB-MPE)

They have the same issues like here: https://www.satdreamgr.com/forum/sho...-Encapsulation

https://i.postimg.cc/J0VmmjpK/1_0_1_...1008210214.jpg

So most probably, you need to perform some kind of cleaning with ipclear or ottextractor. I am afraid none of them has available sources.
10-11-18, 00:58
xosef1234

Re: Απ: OTT (DVB-MPE)

Hi,

find below a link to my extractor tool 'dvb-ip-mpe2ts.pl' written in perl in case you want to implement this. I guess it could be done with astra-sm.
https://mega.nz/#!gsQTjYKI!9ceDVKr-U...eakmZNrfQckW3g

Code:

Usage: dvb-ip-mpe2ts.pl [OPTIONS] ---------------------------------------------- dvb-ip-mpe2ts.pl v0.3 10/11/2018 Extract ts-file: -i, DVB-IP-MPE TS input file ('-' for STDIN) -o, extracted TS output file ('-' for STDOUT) -p, pid to be processed -a, destination IP-address, e.g. 127.0.0.1 -n, destination port, e.g. 3000 Scan file for pids, destination IP-addresses and port: -s, number of valid TS packets with pusi to be scanned in DVB-IP-MPE TS input file, e.g 100 Help: -h, print this help Examples: dvb-ip-mpe2ts.pl -i inputfile.ts -o outputfile.ts -p 200 -a 127.0.0.1 -n 3000 dvb-ip-mpe2ts.pl -i inputfile.ts -o - -p 200 -a 127.0.0.1 -n 3000 > outputfile.ts cat inputfile.ts | dvb-ip-mpe2ts.pl -i - -o - -p 200 -a 127.0.0.1 -n 3000 > outputfile.ts dvb-ip-mpe2ts.pl -i inputfile.ts -s 100
13-11-18, 22:34
athoik

Απ: OTT (DVB-MPE)

Yes it work much better with this perl script!

https://i.postimg.cc/9QRqdqTw/1-0-1-...1113220605.jpg

https://i.postimg.cc/TPc2gRkW/1-0-1-...1113220903.jpg

https://i.postimg.cc/SKcdGP89/1-0-1-...1113221235.jpg

https://i.postimg.cc/KYVNx22C/1-0-1-...1113222304.jpg

PIDS 2001, 2002 seem to work. PID 2010 stream 224.20.20.60 also seem to work.

Other PIDS seem to return a still picture, most are not working at all.

I was able to use perl script from dabstreamer: https://github.com/satdreamgr/dabstr...e412726218ab1f

In lamedb the cached pid was added in the scanned data:

Code:

Int Table p:EUTELSAT,c:031fff,c:1507da,f:40 01b7:001330a8:000a:0002:1:0:0 .... CANALETTO p:EUTELSAT,c:031fff,c:1507d2,f:40 270f:00c00000:043e:0001:12:0:0

In userbouquet:

Code:

#SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:C:A:2454:13E:820000:0:0:0:/2001/224.20.20.2/6000 2001-224.20.20.2 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:C:A:2454:13E:820000:0:0:0:/2002/224.20.20.13/6000 2002-224.20.20.13 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:C:A:2454:13E:820000:0:0:0:/2002/224.20.20.14/6000 2002-224.20.20.14 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:C:A:2454:13E:820000:0:0:0:/2004/224.20.20.50/6000 2004-224.20.20.50 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:C:A:2454:13E:820000:0:0:0:/2004/224.20.20.6/6000 2004-224.20.20.6 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:C:A:2454:13E:820000:0:0:0:/2005/224.20.20.11/6000 2005-224.20.20.11 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:C:A:2454:13E:820000:0:0:0:/2005/224.20.20.12/6000 2005-224.20.20.12 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:C:A:2454:13E:820000:0:0:0:/2005/224.20.20.9/6000 2005-224.20.20.9 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:C:A:2454:13E:820000:0:0:0:/2006/224.20.20.18/6000 2006-224.20.20.18 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:C:A:2454:13E:820000:0:0:0:/2006/224.20.20.20/6000 2006-224.20.20.20 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:C:A:2454:13E:820000:0:0:0:/2006/224.20.20.26/6000 2006-224.20.20.26 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:C:A:2454:13E:820000:0:0:0:/2007/224.20.20.200/6000 2007-224.20.20.200 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:C:A:2454:13E:820000:0:0:0:/2007/224.20.20.21/6000 2007-224.20.20.21 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:C:A:2454:13E:820000:0:0:0:/2007/224.20.20.22/6000 2007-224.20.20.22 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:C:A:2454:13E:820000:0:0:0:/2007/224.20.20.25/6000 2007-224.20.20.25 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:1:B7:2454:13E:820000:0:0:0:/2009/224.20.20.51/6000 2009-224.20.20.51 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:1:B7:2454:13E:820000:0:0:0:/2009/224.20.20.52/6000 2009-224.20.20.52 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:1:B7:2454:13E:820000:0:0:0:/2009/224.20.20.54/6000 2009-224.20.20.54 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:1:B7:2454:13E:820000:0:0:0:/2009/224.20.20.55/6000 2009-224.20.20.55 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:1:B7:2454:13E:820000:0:0:0:/2009/224.20.20.57/6000 2009-224.20.20.57 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:1:B7:2454:13E:820000:0:0:0:/2010/224.20.20.58/6000 2010-224.20.20.58 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:1:B7:2454:13E:820000:0:0:0:/2010/224.20.20.59/6000 2010-224.20.20.59 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:1:B7:2454:13E:820000:0:0:0:/2010/224.20.20.60/6000 2010-224.20.20.60 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:1:B7:2454:13E:820000:0:0:0:/2010/224.20.20.61/6000 2010-224.20.20.61 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:1:B7:2454:13E:820000:0:0:0:/2010/224.20.20.62/6000 2010-224.20.20.62 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:1:B7:2454:13E:820000:0:0:0:/2010/224.20.20.63/6000 2010-224.20.20.63 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:1:B7:2454:13E:820000:0:0:0:/2010/224.20.20.64/6000 2010-224.20.20.64 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:1:B7:2454:13E:820000:0:0:0:/2010/224.20.20.65/6000 2010-224.20.20.65

The script goes on /usr/bin/ as executable.

Code:

opkg install perl opkg install perl-module-getopt-std opkg install perl-module-file-basename
13-11-18, 23:18
xosef1234

Re: Απ: OTT (DVB-MPE)

Great!! )=:$

I was working on the script in order to eliminate some bugs and insert improvements.
The tool is now also able to extract the stream in pid 2002 with ip 224.20.20.30
https://mega.nz/#!dph2iY6J!xM39SfiEI...KjK7jvfnkaITNQ

Offline I get the following result with the tool:

Code:

Nr. | PID | Dest-IP-Address | Port | Payload Type | Channel Name --- | ---- | --------------- | ----- | ---------------- | ------------------------------ 1 | 2001 | 224.20.20.2 | 6000 | 33 MP2T AV | AlJazeera ->ok 2 | 2002 | 224.20.20.13 | 6000 | 33 MP2T AV | TV5Monde ->ok 3 | 2002 | 224.20.20.14 | 6000 | 33 MP2T AV | AbuDhabiSports1 ->ok 4 | 2002 | 224.20.20.30 | 6000 | 1 reserved A | -> with v0.6 ok (FTV) 5 | 2004 | 224.20.20.6 | 6000 | 33 MP2T AV | Rossiya24 ->ok 6 | 2005 | 224.20.20.11 | 6000 | 33 MP2T AV | Euronews ->ok 7 | 2005 | 224.20.20.12 | 6000 | 33 MP2T AV | BloombergTV ->ok 8 | 2005 | 224.20.20.10 | 6000 | 33 MP2T AV | BBCNews ->ok 9 | 2005 | 224.20.20.9 | 6000 | 33 MP2T AV | Fashiontvr ->ok 10 | 2006 | 224.20.20.18 | 6000 | 33 MP2T AV | SkyNewsArabia ->ok 11 | 2006 | 224.20.20.26 | 6000 | 33 MP2T AV | CRTV ->ok 12 | 2006 | 224.20.20.20 | 6000 | 33 MP2T AV | France24Dveo ->ok 13 | 2007 | 224.20.20.22 | 6000 | 33 MP2T AV | NHK ->ok 14 | 2007 | 224.20.20.25 | 6000 | 33 MP2T AV | France24en ->ok 15 | 2007 | 224.20.20.200 | 6000 | 33 MP2T AV | Channel List -> stream where we can get the Channel names from 16 | 2007 | 224.20.20.21 | 6000 | 33 MP2T AV | FashionTV -> stream encrypted with AES-128 17 | 2009 | 224.20.20.51 | 6000 | 33 MP2T AV | HGTV -> still picture 18 | 2009 | 224.20.20.55 | 6000 | 33 MP2T AV | ElevenSport2 ->ok 19 | 2009 | 224.20.20.57 | 6000 | 33 MP2T AV | Eurosport1 ->ok 20 | 2009 | 224.20.20.52 | 6000 | 33 MP2T AV | Alekino ->ok 21 | 2009 | 224.20.20.54 | 6000 | 33 MP2T AV | ElevenSport1 ->ok 22 | 2010 | 224.20.20.61 | 6000 | 33 MP2T AV | TVN24 ->ok 23 | 2010 | 224.20.20.60 | 6000 | 33 MP2T AV | Planete -> still picture 24 | 2010 | 224.20.20.58 | 6000 | 33 MP2T AV | Kuchnia ->ok 25 | 2010 | 224.20.20.65 | 6000 | 33 MP2T AV | Discovery ->ok 26 | 2010 | 224.20.20.64 | 6000 | 33 MP2T AV | TVPsport ->ok 27 | 2010 | 224.20.20.63 | 6000 | 33 MP2T AV | TVPinfo ->ok 28 | 2010 | 224.20.20.62 | 6000 | 33 MP2T AV | TVNstyle ->ok 29 | 2010 | 224.20.20.59 | 6000 | 33 MP2T AV | Minimini -> still picture
14-11-18, 00:04
athoik

Απ: OTT (DVB-MPE)

Latest one has exta depends

Code:

opkg install perl-module-utf8 opkg install perl-module-encode

root@osmio4k:~# wget http://127.0.0.1:8001/1:0:C:A:2454:13E:820000:0:0:0: -q -O- | dvb-ip-mpe2ts.pl -i - -s 10000
Nr. | PID | Dest-IP-Address | Port | Payload Type | Channel Name
--- | ---- | --------------- | ----- | ---------------- | ------------------------------
1 | 2002 | 224.20.20.30 | 6000 | 1 reserved A |
2 | 2002 | 224.20.20.13 | 6000 | 33 MP2T AV |
3 | 2002 | 224.20.20.14 | 6000 | 33 MP2T AV |
root@osmio4k:~#
14-11-18, 20:29
athoik

Απ: OTT (DVB-MPE)

In conslusion in order to play with perl script provided from xosef1234 you need the following:

1. scan 13E Canaletto and then modify lamedb and add the pid you like to stream, in example below I set pid 2002 in CANALETTO and pid 2010 in Int Table.

Most probably there is a way to add fake entries in order to stream all pids, just for testing below is enough.

Code:

Int Table p:EUTELSAT,c:031fff,c:1507da,f:40 01b7:001330a8:000a:0002:1:0:0 .... CANALETTO p:EUTELSAT,c:031fff,c:1507d2,f:40 270f:00c00000:043e:0001:12:0:0

2. Install with ftp perl script dvb-ip-mpe2ts.pl to /usr/bin/ folder as executable

Code:

chmod +x /usr/bin/dvb-ip-mpe2ts.pl

3. Install dependencies and update image

Code:

opkg update opkg upgrade opkg install perl opkg install perl-module-getopt-std opkg install perl-module-file-basename opkg install perl-module-utf8 opkg install perl-module-encode reboot

4. Install the following bouquet (more entries are available on this thread, read, and then read, experiment), it uses PID inserted on Canaletto.

Code:

#SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:C:A:2454:13E:820000:0:0:0:/2002/224.20.20.13/6000 2002-224.20.20.13 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:C:A:2454:13E:820000:0:0:0:/2002/224.20.20.14/6000 2002-224.20.20.14 #SERVICE 1:0:1:0:0:0:0:0:0:0:http://localhost:5237/ott/1:0:C:A:2454:13E:820000:0:0:0:/2002/224.20.20.30/6000 2002-224.20.20.30

And then it works! (much much better than getting pixelation!)

But is not 100% stable due to high load, somebody should convert this perl in C/C++ in order to make it faster! (no idea if there perl can run scripts "faster" -O3? )

https://i.postimg.cc/90Gnb6Xw/Screen...t-21-19-54.png

https://i.postimg.cc/4NQ09RFr/1-0-1-...1114202218.jpg
https://i.postimg.cc/Qx3PCdSQ/1-0-1-...1114202258.jpg
https://i.postimg.cc/mkxnQL4G/1-0-1-...1114202331.jpg

Thanks to xosef1234 for his great job!
14-11-18, 22:32
xosef1234

Re: OTT (DVB-MPE)

Next version (v0.7):
-extraction time reduced by approx. 50% (only tested offline with one available ts-file)
-dependency to perl-module-utf8 and perl-module-encode removed (bug in previous version)

https://mega.nz/#!pgp2RKJB!LIFjKcdtC...Tb4sWO6_obYZ5I

PS: would be great to receive feedback if reception is now stable

Thanks

Show 40 post(s) from this thread on one page