Yes, we had a server failure, everything was lost. We recreate everything on new server. Long story, short we are almost ready. Please wait...
Printable View
Yes, we had a server failure, everything was lost. We recreate everything on new server. Long story, short we are almost ready. Please wait...
OK, no Pb. Good luck to you.
I'll do a re-flash when the server is back up so I can retrieve my config settings for FanControl during auto-restore.
I suppose this was just bad timing for me.
Νέα images SatDreamGr 2015-10-25
-Όλες οι αλλαγές στο Openpli έως 24-10-2015
Αλλαγές Satdreamgr
1. Βελτιώσεις στο Satdreamgr-HD skin
2. Νέο spinner
Διαθέσιμα για κατέβασμα http://www.satdreamgr.com/forum/cmps...dreamgr-images
-Αναβάθμιση image μέσα από το Enigma: Μενού -> Εγκατάσταση -> Διαχείριση λογισμικού -> Ενημέρωση λογισμικού .-
Εφόσον πρώτα εκτελεστούν οι παρακάτω εντολές σε παλιό image:
Για όλους τους δέκτες εκτός dm800
Code:sed -i 's/192.227.231.45/188.165.252.42/g' /etc/opkg/*.conf
#or
wget http://188.165.252.42/feeds/up.txt -qO-| sh
Για τον δέκτη dm800
Code:sed -i 's/192.227.231.45/23.94.65.126/g' /etc/opkg/*.conf
#or
wget http://23.94.65.126/feeds/up.txt -qO-| sh
New images SatDreamGr 2015-10-25
Latest version includes all OpenPLi updates up to 24-10-2015
Satdreamgr Changes
1. Improvements at Satdreamgr-HD skin
2. New spinner
Download http://www.satdreamgr.com/forum/cmps...dreamgr-images
-Update from Enigma: Menu -> Install -> Software Management -> Update Software .-
Please run the following command before updating old image
For all receivers except dm800
Code:sed -i 's/192.227.231.45/188.165.252.42/g' /etc/opkg/*.conf
#or
wget http://188.165.252.42/feeds/up.txt -qO-| sh
For receiver dm800
Code:sed -i 's/192.227.231.45/23.94.65.126/g' /etc/opkg/*.conf
#or
wget http://23.94.65.126/feeds/up.txt -qO-| sh
ChangeLog
Code:Enigma2 Changelog:
5983e1c Add option to enable or disable the timer conflict detection
031e940 config descriptions: rephrase streaming/descrambling options.
d498c04 streaming/remote fallback tuner: Add option to always descramble incoming streams.
8e0e0a6 add eStreamClient info
59cf27d cosmetic: change eDVBServiceBase::tryFallbackTuner into a static member method.
a76e8f5 ServiceDVBRecord: Add fallback tuner to recording as well.
fa7190f DVBServiceBase: refactor fallback tuner code into member method.
271d328 ServiceDVBRecord: add m_is_pvr member.
d820643 ServiceDVBPlay: change m_is_stream and m_is_pvr from int to bool.
aa88f8d debug: silence annoying messasge "[eDVBTeletextParser] PES data_unit_length(%d) > len(%d)"
68ff7b5 Update Latvian translation
6b11574 Full french translation. Thnx again Pr2
351c68f update for the swedish translation.
5ac0349 pl.po: Translations update and some corrections
bad34be Correction of PL translation
bc9aace fix copy/paste bug in similar epg for FullHD
44cd2d9 Metaparser: add sanity check
e38e02a Store service name in recordings meta file.
ab32fb9 PositionerSetup: add missing orb_pos in createConfig removed in d73c5a51d0602a0d3a4ad49946006f66967b2c2a, thx theparasol
ddf55d9 PositionerSetup: remove forgotten incorect string in createSetup
34b7672 Update pl.po
b424197 SoftwareManager: Sanitize imports
a1654e3 Network.py: simplify checkforInterface
5d6d851 Screens/NetworkSetup.py: Sanitize imports
6a83d50 Remove "newplugin.py"
7805268 [PositionerSetup] fix default sat value
d73c5a5 [PositionerSetup] add checking USALS ,update skin and new option save index to setup
d690018 Update French translations by Pr2
aa2695f update ru.po
a7db35f Update Latvian translation
770266b Add "DUB" to Portuguese audio language choices.
407cbab DVD player plugin possible gsod error.
0391a06 Possible GSOD er by commit 08e140f0e238a3e110b93ba9cdab066b25196c1d
0db71cf [NumericalTextInput] add symbol #
56a009a Python import fixup: Don't import os.path. Avoid 'from'.
282bbff Converter Streaming.py - add sanity check
08e140f Audio cd whithout cdfs support.
c7d64cc pixexif: cosmetic
OE-Core Changelog:
4bac1f6 meta-dream: dreambox-boot-progress: set proper S value
ce7e34b The skin wouldn't install completele due the missing of the postinstall.
cfe07bb formuler: update bsp
6b08b0f streamproxy: Add support for VU+ SoloSE.
a2174c7 xtrend: update bsp
1e1bfd5 fakelocale pl_PL lc_time: change month names to genitive, for grammatically correct displaying of date
42af7ca xtrend: update bsp
842b886 forgot adding the pd1loi-hd bb file :(
e46720e add PD1loi-hd skin to the feeds
9b8a067 xmltvimport: Fix spurious failures to process incoming data
988aa0b xmltvimport-rytec: New sources (added: Russian)
1d3a0b6 meta-openpli: python-wifi fix SRC_URI
9bcb233 xtrend: update bsp
371a0ab update SRCREV to tuxtxt HEAD
d08597f Update HansSettings to okt 14 2015
8ae0bc7 xtrend: update bsp
e1c6c35 xtrend: update bsp
d72eb4f -e meta-vuplus: update bsp
07111ae xmltvimport-rytec: fixed URI.
1a7c073 xmltvimport: Get rid of os.system calls
0f7aadc xmltvimport-rytec: Changed URI (new website provider)
f58627a update submodule meta-hd
54f13fe enigma2-plugin-extensions-xmltvimport: Update to current HEAD
eddbd35 layer.conf: Prevent OPENPLI_BASE value dirtying sstate value
308142d hotplug-e2-helper: Audio CD without cdfs
e9c40c5 busybox/mdev.conf start bdpoll only on insertion
a8d2e68 push oscam to rev 11034
Thanks a lot. Online Feeds are back.
SatDreamGr Images Et for 10x00 for my tanks
Υπάρχει περίπτωση στο μελλόν να αναβαθμίσετε το Gstreamer στην εκδοση 1.x?
Φυσικά... Όταν είναι σταθερό αρκετά.Quote:
Originally Posted by luis67
Στην παρούσα φάση ακόμη έχει θεματάκια.
Ολα ενταξει με την αναβαθμιση στον xtrend 7000 με telnet.Η αναβαθμιση προχωρησε αψογα και γρηγορα.
Ενημέρωσα με edit τα feeds, εβαλα και οτι "τελευταιο" αξιζει, και ηρθε η ώρα για backup σε nfi . Eχουμε κατι μεσα στο image, ή πρεπει να περάσω το flashbackup?
? .
Στο panel δεν υπάρχει το Dreambox backup;Quote:
Originally Posted by kastorasgr
Μολις πριν λιγο το εκανα. Είναι στα menu, στο "panel+", το ""SDGBackup DreamboxEnigma2" . Εκανε ένα nfi κοντα στα 60 ΜΒ, οπότε φαινονται όλα φυσιολογικά, και λογικά θα είναι ΟΚ, αφου και τα μηνυματα κατα την διαδικασία ήταν ΟΚ. Μένει να κάνω ένα image και απο το φλασακι που έχω πανω, και θα είμαι εντάξει σε όλα. Για το φλασακι, σε windows προτεινω το "imageusb", που με εχει βγαλει ασπροπροσωπο και παλιότερα.
Kalispera paidia,
exo to Gigablue 800 ue plus. mporo na egkatastiso kai sto diko mou ta satdream image? an nai pio tha prepei na katebaso?
euxaristo poly
καλή χρονιά φίλε η ομάδα μας δεν έχει βγάλει ακόμα image για την σειρά δεκτών GigablueQuote:
Originally Posted by akis1926
Euxaristo polu! Kali xronia se olous!!
ok. Ginete parola auta na balo ta kanalia apo to GreekStreamTV sta Bouquet;
δοκίμασε να βάλεις το πρόσθετο
http://www.satdreamgr.com/forum/show...3893#post53893
http://www.satdreamgr.com/forum/foru...-GreekStreamTV
vu+ solo 4k tha yparksei SatDreamGr Images ????
vu+ solo 4k tha yparksei SatDreamGr Images ????
Σύντομα.-
Νέα images SatDreamGr 2016-01-18
-Όλες οι αλλαγές στο Openpli έως 18-01-2016
Αλλαγές Satdreamgr
Βελτιώσεις στο Satdreamgr-HD skin
Διαθέσιμα για κατέβασμα http://www.satdreamgr.com/forum/cmps...dreamgr-images
-Αναβάθμιση image μέσα από το Enigma: Μενού -> Εγκατάσταση -> Διαχείριση λογισμικού -> Ενημέρωση λογισμικού .-
New images SatDreamGr 2016-01-18
Latest version includes all OpenPLi updates up to 18-01-2016
Satdreamgr Changes
Improvements at Satdreamgr-HD skin
Download http://www.satdreamgr.com/forum/cmps...dreamgr-images
-Update from Enigma: Menu -> Install -> Software Management -> Update Software .-
ChangeLog
Code:Enigma2 Changelog:
343b48b Update French translations, thnx Pr2 and xommit for their work.
385af68 fonts: cosmetic debug fix
465b91e debugging: timestamp python output
07ad3c3 Remove the --witholdpvr option and HAVE_OLDPVR conditional
530bef6 Remove referral to FBC tuner manager that's not in this tree.
6a1c883 DVB: Initialize eDVBResourceManager taking care of dependencies
b4b580b servicemp3: reduce eDebug output about buffer percentage
b8a660e cosmetic eDebugNoNewLine fixes
fd87e0c Revert "HdmiCec: Repeat wakeup messages"
f810e6c HdmiCec: Repeat wakeup messages
f9ab320 NumberZap: Auto adjust NumberZap timeout time
8b34514 update French translations, thnx Pr2.
eb4d10f ScanSetup: Return the TerrestrialDescription in list and only when something is connected on NIM
a7bd897 InfoBar/MoviePlayer: add sanity check for self.servicelist
946f903 config/ConfigNumber: add use addNotifier if change value
deaee5f configure.ac - remove FrontprocessorUpgrade and NFIFlash missed in a6cb9fcb40d84b6a32c4feba32bb81e7c2e99848
bf4c1fc HTTPProgressDownloader: Make User-Agent header HbbTV compliant
a6cb9fc Remove Dreambox only SystemPlugins NFIFlash and FrontprocessorUpgrade
18dd084 SleepTimerEdit: Streamline configuration of wakeup timer
c78bb24 enigma2.bb: remove colorlcd switch option
de80ba3 ServiceInfo: Add is 4K
e8aa4be VideoHardware: only allow Scart if modes exist
8c208e3 fixed position for LcdLiveTV test
bf882d9 Update polish translations Signed-off-by: technl <[email protected]>
069cdf8 Update Estonian translations, by zeros
43bb8a7 Update French translations by Pr2
cc90016 FrontendInfo: When we have more than x tuners indicate it condesed.
ab15d27 InputDevice: Do not force default RC
fe20071 ShowVonLCD: More finetuning
50f5481 SHowTVonLCD: Solve all issue with VU+Solo4K
e39b321 Fix unintended induced whitespaces
d3f5359 TVonLCD: only use dummy screen work-a-round for xTrend8500 method
72daba8 Add toggle TV on LCD display for VU+Solo4K
dcb1488 Hotkey: Allow short/long on Radio and TV button
76c35c3 vuplus event driver: add vusolo4k and vuzero to the models that need the event driver workaround in enigma.
b3357da CFile: Add write function that accepts string data
f82d0e8 InputDevice: Simplify RcTypeControl class
83f9ba2 Add service name to title of single EPG
458fd36 mytest.py: Check if self.summary has value
7e5f22c Fix "windowstyle" for the dm800se display
16b3e3e add vusolo4k remotecontrol
79e33d1 PEP8: Fix whitespace
765345d default_skin.xml: cleanup not required spaces
5d37a7c Finetune wizard in default skin
295ce88 Add preliminary display skin for vusolo4k
79dfea1 Get rid of "--with-colorlcd" parameter
1f89468 update ru.po
dfcc90a update ru.po
53719c8 Screens/LocationBox.py: Get rid of "from Directories import *"
f3a0902 GraphMultiEpgSetup.py: Remove unused Directories.* import
bed58c6 skin_display_et8500.xml: add service number
bb72217 Converter/ServiceName.py: add type service number
3235a50 Tools/Directories.py: Get rid of "fallback" in resolveFilename
7214cdf Tools/Directories.py: Refactor evil imports
ecbb032 SystemPlugins/FastScan/plugin.py: Refactor evil imports
4a00c3e VideoEnhancement/plugin.py: Refactor evil imports
ce96f70 VideoEnhancement/VideoEnhancement.py: Refactor evil imports
716a33f Components/InputDevice.py: Refactor evil imports
720d163 WirelessLan/plugin.py: Remove unused imports
030db79 Components/config.py: Refactor evil imports
7cdb1c8 Components/Keyboard.py: Refactor code
ee13209 Screens/About.py: Calculate correct value for "Free" memory, avoid crash
ce2cd99 Avoid os.system and use resource friendly eConsoleAppContainer
ee76a5e update ru.po
e13914b CommonInterfaceAssignment: delete replace unicode
ab82077 Satfinder: fix set value "nothing" if not sat list for tuner
5330286 ChannelSelection: fix zapBack if use "Enable OK as preview in channel selection"
3a385a1 Move filepush from lib/base to lib/dvb
b106732 servicedvb.h: Remove unused include filepush.h
d806a06 CommonInterfaceAssignment: force set value if edit setting
5596e5b filepush.h: Get rid of IO priority parameters
8a5555c filepush.h: Remove unused default buffersize parameters
04b1b6e frontend: eDebug showing used DVB API per frontend
5adb610 CommonInterfaceAssignment: add option 'Add all services provider'
ed59d08 frontend: correct snr/db value for tuner Sundtek MediaTV Digital Home III (dvb-t mode)
d107417 filepush: convert default buffersize into a #define
4392ac0 frontend: eDebug showing used DVB API per frontend
0e9573a dvb: cosmetic
cedf494 frontend: correct snr/db value for tuner "Si216x" (dvb-t mode)
5d47008 update ru.po
31aa5e9 fix commit https://github.com/OpenPLi/enigma2/c...6d71ad16909341
51d0101 Update Latvian translation
1294954 PictureInPicture: update text if error to start pip (not need to translate it)
2a458b8 Update Greek translations, thnx glamourservices.
OE-Core Changelog:
749d5d5 update oscam to rev 11209.
cdb9e97 meta-xsarius: update bsp
db30b76 add pictures of the Solo4k remotecontrol to the openwebif plugin.
f45caae formuler: update bsp
ababa6d meta-vuplus: update bsp
59b500a Update Ziggo cablesettings.
405eb5d meta-xp: Prevent SRC_URI fetch errors for other boxes using COMPATIBLE_MACHINES
e2519ec Remove timezone.xml from tuxbox-common
0686902 Remove 'frontprocessor' leftovers
624b0af meta-xp: update bsp
11047fa meta-vuplus: update bsp
1c8a020 xtrend: update bsp
e962e28 aio-grab: update
b2181a5 aio-grab: and now do it right.
ee3035c aio-grab: update new LICENSE checksum.
442295f aio-grab: update to include vusolo4k support.
920d76e Streamproxy: update.
cec3834 Get rid of "colorlcd" feature
f2c043e gst-plugin-subsink: Update master and remove autoconfigure hack
32d9721 meta-vuplus: update bsp
689f8f7 Fix builds for some non-fpu arch models on gcc 5 by patching libffi.
c635755 update oscam to rev11202, solved streampid issues
17d1a88 meta-vuplus: update bsp
8707802 xmltvimport-rytec: Update sources to 2015-11-25
96b828f Update oscam to rev.11200, errno fix and improved nano e0 logging
I just upgraded to the latest SatDreamGr and everything seems to be working fine except for one thing: The plugin "enigma2-plugin-pli-softcamsetup" no longer works with the old skin (enigma2-plugin-skins-satdreamgr-hd-transpbaold).
Whenever I use this skin and press [Blue] - Softcam, I get a blank screen with no option to select the softcam or restart the current one.
I removed softcams and the softcam setup plugin and reinstalled them, still the same problem. With the new skin, it works fine.
Please change in the skin file skin.xml
We have also changed in feeds (enigma2-plugin-skins-satdreamgr-hd-transpbaold V0.2)Quote:
Originally Posted by Marc-UK
Thank you. I updated and it''s working fine now :-)
Γεια σας έχω πρόβλημα ΕΓΚΑΤΑΣΤΑΣΗ με Satdreamgr-4.0 μου λέει You Need A Image With At Least 2Nd #89.
έχω DM7020HDv2 SSL #89
πρόβλημα με Satdreamgr-4.0,openatv4.2,5.1,5.2
λειτουργεί dreambox-image,Newnigma2,oozoon,Merlin.
τι μπορώ να κάνω σας παρακαλώ βοηθήστε με
κανε μια δοκιμη να το περασεις μεσω serial ...Quote:
Originally Posted by ck-olmeca
προσπάθησα DreamUp V1.3.3.12
14:04:04 Boxtyp: DM7020HD
14:04:50 Berechne Prüfsumme...
14:04:51 Lade Datei zur Box hoch...
14:05:22 Die Box flasht jetzt aus dem lokalen RAM...
14:05:24 INVALID IMAGE (YOU NEED A IMAGE WITH AT LEAST 2ND #89)
με dreamup και serial?
η με dreamup και network?
προσπάθησα με dreamup και serial
προσπάθησα dreamup και network i mono network
INVALID IMAGE (YOU NEED A IMAGE WITH AT LEAST 2ND #89)
Θα το κοιτάξουμε...Quote:
Originally Posted by ck-olmeca
Μπορείς να δοκιμάσεις με το τελευταίο experimental περνώντας κανονικά image με web browser να δούμε αν έφυγε το πρόβλημαQuote:
Originally Posted by ck-olmeca
http://sgcpm.com/satdreamgr-images-e...2-20160305.zip
ευχαριστώ για την γρήγορη απάντηση
προσπάθησα web browser kai με DreamUp ημερομηνία SSL89 15.10.2015 δυστυχώς ακόμα το ίδιο You Need A Image With At Least 2Nd #89
Έχω κάνει τώρα εγκατάσταση το dreambox-image-dm7020hdv2-20160105 meta install to dreambox-secondstage_89-r12.0_dm7020hd.ipk
ημερομηνία SSL89 09.03.2015
και προσπάθησε και πάλι τα πάντα δυστυχώς ακόμα το ίδιο.
Αυτό είναι απίστευτο
Μπορείς να μας δώσεις link για το ssl;
Αυτό το 2nd #89 είναι περίεργο, δεν το βλέπω κάπου στα sources της DMM.
Το secondstage 89 είναι στο image τώρα και δεν χρειάζεται να το περάσεις ξανά
Το δικό μας image με web browser δεν το παίρνει ???
προσπάθησα web browser το ίδιο You Need A Image With At Least 2Nd #89
Αυτό το image δεν το παίρνει κατευθείαν και χωρίς να περάσεις αρχείο secondstage ;
Αν ναι μετά από αυτό περνα το δικό μας
http://dreamboxupdate.com/opendreamb...2-20160105.nfi
Νομίζω ότι βρήκα τι παίζει, μάλλον θέλει νεότερο buildimage για να κάνει detect την flash toshiba.
http://git.opendreambox.org/?p=build...cda22431d4c1f4
Σε λίγο θα ανεβάσουμε νέο πειραματικό για δοκιμή.
Edit1. Στον dm7020hdv2 υπάρχει ένα image με αυριανή ημερομηνία, δοκίμασε με αυτό.
Το δοκίμασα kai αυτό,
to Αγόρασα πριν 2 μέρες κάτι είναι διαφορετικo se αυτό to DM7020hdv2 και δεν θέλει ta open image
Δοκίμασε με αυτό που λέει ο athoik (κατευθείαν χωρίς secondstage)
http://sgcpm.com/satdreamgr-images-e...2-20160306.zip