I installed GreekStreamTV in azbox running E2. But can not install dependencies, says download error. Any solutions?Thanks.
http://bbs.hkhdtv.com/data/attachmen...ihx6uhg61m.jpg
Printable View
I installed GreekStreamTV in azbox running E2. But can not install dependencies, says download error. Any solutions?Thanks.
http://bbs.hkhdtv.com/data/attachmen...ihx6uhg61m.jpg
Dear lhuhb,Quote:
Originally Posted by lhuhb
The above messages are download errors, the download sources seems not to be correct.
When you are trying to open GreekStreamTV is says Please download depedencies? If yes what is the full message?
Also what version of GreekStreamTV are you trying to install? (latest is 2.4)
Many thanks to athoik.Quote:
Originally Posted by athoik
I have installed GreekStreamTV version 2.4 and 1.9. And version 1.9 contains more packages files than 2.4,but still need some packages.
The message shown when I open GreekStreamTV is:
http://bbs.hkhdtv.com/data/attachmen...mqm5em00z0.jpg
I have also tried to modify opkg configuration files (/etc/opkg/*.conf) to the live dm800se source urls and then run "Install dependencies".The GreekStreamTV can run but my azbox freezes show "=s" when reboot. I have to flash azbox.
The opkg configuration files:
1.all-feed.conf
src/gz official-all http://sources.dreamboxupdate.com/op...perimental/all
2.arch.conf
arch all 1
arch any 6
arch noarch 11
arch mipsel 16
arch azboxhd 21
3.azboxhd-feed.conf
src/gz official-azboxhd http://www.azbox-enigma.eu/RTi_Update
4.mipsel-feed.conf
src/gz official-mipsel http://sources.dreamboxupdate.com/op...imental/mipsel
5.opkg.conf
# Must have one or more source entries of the form:
#
# src <src-name> <source-url>
#
# and one or more destination entries of the form:
#
# dest <dest-name> <target-path>
#
# where <src-name> and <dest-names> are identifiers that
# should match [a-zA-Z0-9._-]+, <source-url> should be a
# URL that points to a directory containing a Familiar
# Packages file, and <target-path> should be a directory
# that exists on the target system.
# Proxy Support
#option http_proxy http://proxy.tld:3128
#option ftp_proxy http://proxy.tld:3128
#option proxy_username <username>
#option proxy_password <password>
# Enable GPGME signature
# option check_signature 1
# Offline mode (for use in constructing flash images offline)
#option offline_root target
dest root /
dest ram /media/ram/
dest hdd /media/hdd/
dest usb /media/usb/
lists_dir ext /var/lib/opkg
Dear lhuhb,
Make a clean install of your image (RTi).
Then try the following from the telnet (each line contains one command):
Then give us the output of the above commands.Code:opkg update
opkg install python-distutils
opkg install python-compression
opkg install python-ctypes
opkg install python-zlib
opkg install python-subprocess
opkg install python-pkgutil
opkg install python-json
opkg install python-textutils
opkg install python-shell
opkg install python-io
opkg install gst-plugins-good-flv
I installed image RTi1.3. The command output is below:Quote:
Originally Posted by athoik
Code:root@azboxhd:~# opkg update
Downloading http://sources.dreamboxupdate.com/opendreambox/1.6/experimental/all/
Packages.gz
Downloading http://www.azbox-enigma.eu/RTi_Update/Packages.gz
Downloading http://sources.dreamboxupdate.com/opendreambox/1.6/experimental/mips
el/Packages.gz
Collected errors:
* Failed to download http://sources.dreamboxupdate.com/opendreambox/1.6/experim
ental/all/Packages.gz.
error detail: HTTP response code said error
* Failed to download http://www.azbox-enigma.eu/RTi_Update/Packages.gz.
error detail: HTTP response code said error
* Failed to download http://sources.dreamboxupdate.com/opendreambox/1.6/experim
ental/mipsel/Packages.gz.
error detail: HTTP response code said error
root@azboxhd:~# opkg install python-distutils
Collected errors:
* Cannot find package python-distutils.
root@azboxhd:~# opkg install python-compression
Collected errors:
* Cannot find package python-compression.
root@azboxhd:~# opkg install python-ctypes
Package python-ctypes (2.6.4-ml8.2) installed in root is up to date.
root@azboxhd:~# opkg install python-zlib
Collected errors:
* Cannot find package python-zlib.
root@azboxhd:~# opkg install python-subprocess
Collected errors:
* Cannot find package python-subprocess.
root@azboxhd:~# opkg install python-pkgutil
Collected errors:
* Cannot find package python-pkgutil.
root@azboxhd:~# opkg install python-json
Collected errors:
* Cannot find package python-json.
root@azboxhd:~# opkg install python-textutils
Collected errors:
* Cannot find package python-textutils.
root@azboxhd:~# opkg install python-shell
Package python-shell (2.6.4-ml8.2) installed in root is up to date.
root@azboxhd:~# opkg install python-io
Package python-io (2.6.4-ml8.2) installed in root is up to date.
root@azboxhd:~# opkg install gst-plugins-good-flv
Collected errors:
* Cannot find package gst-plugins-good-flv.
root@azboxhd:~#
The following sources do not exist any more.
Why dont you try a newer firmware? RTi1.3 is an old firmware.Code:http://sources.dreamboxupdate.com/opendreambox/1.6/experimental/all/Packages.gz
http://sources.dreamboxupdate.com/opendreambox/1.6/experimental/mipsel/Packages.gz
http://www.azbox-enigma.eu/RTi_Update/Packages.gz
Downloads - AZBox-Enigma.eu forum
OpenRSi » Downloads
Many thanks,ahoik.I know what the matter is and I will try other sources.Or I will try to unpack newer image to find the new sources.Quote:
Originally Posted by athoik
I used a modified RTi1.3 version with Chinese support. The newer version does not support Chinese.So I have to use current image for a time.