Οι απόψεις μου μπορεί να έχουν αλλάξει, αλλά όχι και το γεγονός ότι έχω δίκιο
Δέκτες: 2χ DΜΜ 900UHD, 1 x Kaon OTESAT
Δορυφορικές Κεραίες: 2x ASTRO 100 (Astra 19.2°E Hotbird 13°E, Eutelsat 9A 9.0°E, Eutelsat 3D 3.0°E)
LNBs 6x Triax TQT-006 Uni QUATTRO LNC 2x Inverto Multi Dielectric Quad LNB IDLB-QUDL24-MULTI-OPP
DISEQC 1x EMP-CENTAURI ProfiLine MultiSwitch MS 17/12-PIU 2x 4x1+ Terrestrisch DiSEqC-EMP Centauri P.164-TW
Is this image for a real Dreambox DM900UHD? sow if i download it, it dont brick it?
i have test it and it dont work on my box this i get on console:
[*] Remounting '/dev/mmcblk0p3' to '/data'[*] Mounting '/dev/mmcblk0p2' to '/mnt'[*] Remounting '/dev/mmcblk0p3' to '/data'[*] Mounting 'tmp' to '/mnt/tmp'[*] Creating /tmp/tmp.MALTP9/settings.tar.gz from /mnt[*] Unmounting '/mnt/tmp'[*] Unmounting '/mnt'[*] Creating ext4 filesystem 'dreambox-rootfs' on /dev/mmcblk0p2
mke2fs 1.43-WIP (18-May-2015)
Discarding device blocks: 4096/253952 done
Creating filesystem with 253952 4k blocks and 63488 inodes
Filesystem UUID: 5fbd891a-1dba-467f-b8a7-ab82b1ee8d97
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
Allocating group tables: 0/8 done
Writing inode tables: 0/8 done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: 0/8 done
[*] Mounting '/dev/mmcblk0p2' to '/mnt'[*] Extracting '/tmp/kh2q7k' to '/mnt'[*] Mounting '/dev' to '/mnt/dev'[*] Mounting '/proc' to '/mnt/proc'[*] Mounting '/run' to '/mnt/run'[*] Mounting '/sys' to '/mnt/sys'[*] Mounting '/tmp' to '/mnt/tmp'
/usr/sbin/flash-kernel: line 25: stat: not found
sh: bad number
Fatal: Kernel image is too big
Fatal: Failed to run kernel-image.postinst[*] Unmounting '/mnt/tmp'[*] Unmounting '/mnt/sys'[*] Unmounting '/mnt/run'[*] Unmounting '/mnt/proc'[*] Unmounting '/mnt/dev'[*] Unmounting '/mnt'
yea i find it to sow i put back Newnigma2 and my DM900 back in order hehe
Οι απόψεις μου μπορεί να έχουν αλλάξει, αλλά όχι και το γεγονός ότι έχω δίκιο
Δέκτες: 2χ DΜΜ 900UHD, 1 x Kaon OTESAT
Δορυφορικές Κεραίες: 2x ASTRO 100 (Astra 19.2°E Hotbird 13°E, Eutelsat 9A 9.0°E, Eutelsat 3D 3.0°E)
LNBs 6x Triax TQT-006 Uni QUATTRO LNC 2x Inverto Multi Dielectric Quad LNB IDLB-QUDL24-MULTI-OPP
DISEQC 1x EMP-CENTAURI ProfiLine MultiSwitch MS 17/12-PIU 2x 4x1+ Terrestrisch DiSEqC-EMP Centauri P.164-TW
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
ok...
Οι απόψεις μου μπορεί να έχουν αλλάξει, αλλά όχι και το γεγονός ότι έχω δίκιο
Δέκτες: 2χ DΜΜ 900UHD, 1 x Kaon OTESAT
Δορυφορικές Κεραίες: 2x ASTRO 100 (Astra 19.2°E Hotbird 13°E, Eutelsat 9A 9.0°E, Eutelsat 3D 3.0°E)
LNBs 6x Triax TQT-006 Uni QUATTRO LNC 2x Inverto Multi Dielectric Quad LNB IDLB-QUDL24-MULTI-OPP
DISEQC 1x EMP-CENTAURI ProfiLine MultiSwitch MS 17/12-PIU 2x 4x1+ Terrestrisch DiSEqC-EMP Centauri P.164-TW
Highlights:
- Improvements on Helptext messages
- Show True/False as graphical switch
- Updated languages translations
- AVSwitchVideoHardware – Add support for ‘full’ aspect ratio mode
- Option Relevant PIDs routing
- HDMI Colorimetry selectable (at Menu, Setup, System, Audio / Video, A/V settings)
Other improvements:
- Flashimage support
- Plugins updates
- Drivers updates
- FFMpeg update 3.4.2 and aarch64 support
- Flashimage code simplified
- Autobackup
- Autotimer version 4.4
- Picons (SNP and SRP format) are back in the feed
- CCcam 2.3.2, and CCcam support for ARM based receivers
- PLi-Full HD cosmetic improvements
- Fallback remote receiver setup (at Menu, Setup, Service searching). Beware: If to select Import from remote receiver URL, all channel settings are replaced from remote receiver
Security:
Bugfix:
- VU+ Solo 4k DiSEqC fix
- VU+ Solo 4k QuadPIP
- Added missing Firmware for RTL8192EU
- Added missing BRCM7439
- Finally new drivers for the ET4x00/5×00/6×00/8000/9×00/10000
There are currently 1 users browsing this thread. (0 members and 1 guests)