Δοκιμές USB DVB-T Stick με Satdreamgr-openpli 4.0

[georgeflu]

Ειναι ευαισθητο όπως το (lemm hd-099).

Ναι,και ευαισθητο ειναι,αλλα και αν και προσπαθησα πολυ,δεν καταφερα να το κολλησω (το lemm προσπαθησα αρκετα,αλλα το καταφερα,ενα maxx το ιδιο,ενα crypto redi 50 af9015 με ελαχιστη προσπαθεια...)

[fantasma]

kserei kapios filos ti drive xriazzete USB DVB-T Stick tis nob..a ..dexths cludibox... black hole image..

[athoik]

Αν δώσεις το αποτέλεσμα των εντολών dmesg και lsusb μάλλον θα μπορέσουμε να σου πουμε τον οδηγό που χρειάζεται.

[medousa89]

γεια σας εχω προβλημα με ενα usb tuner hybrid Kworld VS-DVB-T 323UR chipset em2882 ID eb1a:e323 δεν το βλεπω καθολου!!!
dmesg
αν μπορείτε κάνετε κάτι

[athoik]

Εδώ είναι το δικό σου dmesg, στο οποίο κρασάρει ο kernel!!!

em28xx: New device  USB 2883 Device @ 480 Mbps (eb1a:e323, interface 0, class 0)
em28xx: Audio interface 0 found (Vendor Class)
em28xx: Video interface 0 found: isoc
em28xx: DVB interface 0 found: isoc
em28xx: chip ID is em2882/3
CPU 1 Unable to handle kernel paging request at virtual address 00000000, epc == e11fa764, ra == e11fa9e4
Oops[#1]:
CPU: 1 PID: 201 Comm: modprobe Tainted: P           O    4.5.0 #1
task: 8f558680 ti: 8e75a000 task.ti: 8e75a000
$ 0   : 00000000 10008b00 00000004 00000000
$ 4   : 8eaf3000 00000000 0000000f 8e75bb48
$ 8   : 00000001 00000000 80963080 00000001
$12   : 80970000 000000dc 00000000 00000000
$16   : e1202df4 8eaf3000 e11fa9b4 00000000
$20   : 8ff83000 00000001 800b9f44 8eaf3084
$24   : 00000018 80402e9c                  
$28   : 8e75a000 8e75bac8 8eaf3000 e11fa9e4
Hi    : 00000000
Lo    : 00000176
epc   : e11fa764 em28xx_write_regs_req+0x34/0x250 [em28xx]
ra    : e11fa9e4 em28xx_write_reg+0x30/0x3c [em28xx]
Status: 10008b03	KERNEL EXL IE 
Cause : 00800008 (ExcCode 02)
BadVA : 00000000
PrId  : 0002a065 (Broadcom BMIPS4380)
Modules linked in: em28xx(+) tveeprom r8723bs(O) hci_uart brcmstb_osmini(PO) mn88473(O) fts260(PO)
Process modprobe (pid: 201, threadinfo=8e75a000, task=8f558680, tls=779b9490)
Stack : 00000000 00000006 807f54ac 0000001e 807f54cc e120318e 8eaf3084 e120318c
	  8eaf30a2 8eaf308e 8e75bb7c 8039e454 e1202df4 8eaf3000 e11fa9b4 00000000
	  8ff83000 00000001 800b9f44 8eaf3084 8eaf3000 e11fa9e4 e1202df4 8eaf30bc
	  00000000 00000000 00000001 00000001 800b9f44 e12004c4 8eaf3000 8039eb64
	  ffffff07 02400000 00000001 e1202df4 8eaf30bc 00000000 00000000 e11feff8
	  ...
Call Trace:
[<e11fa764>] em28xx_write_regs_req+0x34/0x250 [em28xx]
[<e11fa9e4>] em28xx_write_reg+0x30/0x3c [em28xx]
[<e12004c4>] em28xx_pre_card_setup+0x34/0x5d0 [em28xx]
[<e11feff8>] em28xx_usb_probe+0xb8c/0x13f4 [em28xx]
[<80543628>] usb_probe_interface+0x1f0/0x2e8
[<80449be0>] driver_probe_device+0x2f0/0x374
[<80449d20>] __driver_attach+0xbc/0xc4
[<804477f8>] bus_for_each_dev+0x6c/0xb4
[<80448f24>] bus_add_driver+0x1f8/0x26c
[<8044a730>] driver_register+0x84/0x12c
[<80541904>] usb_register_driver+0x88/0x1a4
[<80010190>] do_one_initcall+0xec/0x25c
[<800ba0e0>] do_init_module+0x74/0x1d4
[<800b2210>] load_module+0x1e7c/0x2138
[<800b26e0>] SyS_finit_module+0x88/0xa8
[<80022374>] syscall_common+0x30/0x54

Και εδώ είναι ένα log που βρήκε που δίχνει πως περίπου έπρεπε να δουλεύει.

Jan 10 14:28:40 raspberrypi kernel: [  496.156347] em28xx: New device  WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0)
Jan 10 14:28:40 raspberrypi kernel: [  496.156380] em28xx: Audio interface 0 found (Vendor Class)
Jan 10 14:28:40 raspberrypi kernel: [  496.156391] em28xx: Video interface 0 found: isoc
Jan 10 14:28:40 raspberrypi kernel: [  496.156401] em28xx: DVB interface 0 found: isoc
Jan 10 14:28:40 raspberrypi kernel: [  496.159328] em28xx: chip ID is em2882/3
Jan 10 14:28:40 raspberrypi kernel: [  496.361752] em2882/3 #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18
Jan 10 14:28:40 raspberrypi kernel: [  496.361814] em2882/3 #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00
Jan 10 14:28:40 raspberrypi kernel: [  496.361855] em2882/3 #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
Jan 10 14:28:40 raspberrypi kernel: [  496.361894] em2882/3 #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00
Jan 10 14:28:40 raspberrypi kernel: [  496.361933] em2882/3 #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Jan 10 14:28:40 raspberrypi kernel: [  496.361972] em2882/3 #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Jan 10 14:28:40 raspberrypi kernel: [  496.362010] em2882/3 #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00
Jan 10 14:28:40 raspberrypi kernel: [  496.362048] em2882/3 #0: i2c eeprom 70: 32 00 38 00 36 00 32 00 34 00 34 00 38 00 33 00
Jan 10 14:28:40 raspberrypi kernel: [  496.362088] em2882/3 #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00
Jan 10 14:28:40 raspberrypi kernel: [  496.362127] em2882/3 #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00
Jan 10 14:28:40 raspberrypi kernel: [  496.362166] em2882/3 #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89
Jan 10 14:28:40 raspberrypi kernel: [  496.362205] em2882/3 #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 63 ee
Jan 10 14:28:40 raspberrypi kernel: [  496.362245] em2882/3 #0: i2c eeprom c0: 1f f0 74 02 01 00 01 79 da 00 00 00 00 00 00 00
Jan 10 14:28:40 raspberrypi kernel: [  496.362283] em2882/3 #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89
Jan 10 14:28:40 raspberrypi kernel: [  496.362322] em2882/3 #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 63 ee
Jan 10 14:28:40 raspberrypi kernel: [  496.362362] em2882/3 #0: i2c eeprom f0: 1f f0 74 02 01 00 01 79 da 00 00 00 00 00 00 00
Jan 10 14:28:40 raspberrypi kernel: [  496.362412] em2882/3 #0: EEPROM ID = 1a eb 67 95, EEPROM hash = 0xa3573bdd
Jan 10 14:28:40 raspberrypi kernel: [  496.362426] em2882/3 #0: EEPROM info:
Jan 10 14:28:40 raspberrypi kernel: [  496.362436] em2882/3 #0:    AC97 audio (5 sample rates)
Jan 10 14:28:40 raspberrypi kernel: [  496.362445] em2882/3 #0:    500mA max power
Jan 10 14:28:40 raspberrypi kernel: [  496.362458] em2882/3 #0:    Table at offset 0x24, strings=0x1e82, 0x186a, 0x0000
Jan 10 14:28:40 raspberrypi kernel: [  496.362477] em2882/3 #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18)
Jan 10 14:28:40 raspberrypi kernel: [  496.387351] tveeprom 2-0050: Hauppauge model 65018, rev B2C0, serial# 2092643
Jan 10 14:28:40 raspberrypi kernel: [  496.387384] tveeprom 2-0050: tuner model is Xceive XC3028 (idx 120, type 71)
Jan 10 14:28:40 raspberrypi kernel: [  496.387402] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
Jan 10 14:28:40 raspberrypi kernel: [  496.387415] tveeprom 2-0050: audio processor is None (idx 0)
Jan 10 14:28:40 raspberrypi kernel: [  496.387426] tveeprom 2-0050: has radio
Jan 10 14:28:40 raspberrypi kernel: [  496.497613] tvp5150 2-005c: chip found @ 0xb8 (em2882/3 #0)
Jan 10 14:28:40 raspberrypi kernel: [  496.497643] tvp5150 2-005c: tvp5150am1 detected.
Jan 10 14:28:40 raspberrypi kernel: [  496.564050] tuner 2-0061: Tuner -1 found with type(s) Radio TV.
Jan 10 14:28:40 raspberrypi kernel: [  496.609063] xc2028 2-0061: creating new instance
Jan 10 14:28:40 raspberrypi kernel: [  496.609101] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
Jan 10 14:28:40 raspberrypi kernel: [  496.609759] em2882/3 #0: Config register raw data: 0xd0
Jan 10 14:28:40 raspberrypi kernel: [  496.611736] em2882/3 #0: AC97 vendor ID = 0xffffffff
Jan 10 14:28:40 raspberrypi kernel: [  496.612256] em2882/3 #0: AC97 features = 0x6a90
Jan 10 14:28:40 raspberrypi kernel: [  496.612275] em2882/3 #0: Empia 202 AC97 audio processor detected
Jan 10 14:28:41 raspberrypi kernel: [  496.827761] em2882/3 #0: v4l2 driver version 0.2.0
Jan 10 14:28:41 raspberrypi kernel: [  497.103919] em2882/3 #0: V4L2 video device registered as video0
Jan 10 14:28:41 raspberrypi kernel: [  497.103951] em2882/3 #0: V4L2 VBI device registered as vbi0
Jan 10 14:28:41 raspberrypi kernel: [  497.103973] em2882/3 #0: analog set to isoc mode.
Jan 10 14:28:41 raspberrypi kernel: [  497.103985] em2882/3 #0: dvb set to isoc mode.
Jan 10 14:28:41 raspberrypi kernel: [  497.113928] usbcore: registered new interface driver em28xx
Jan 10 14:28:41 raspberrypi kernel: [  497.152984] em28xx-audio.c: probing for em28xx Audio Vendor Class
Jan 10 14:28:41 raspberrypi kernel: [  497.153012] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
Jan 10 14:28:41 raspberrypi kernel: [  497.153022] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab
Jan 10 14:28:41 raspberrypi kernel: [  497.153974] Em28xx: Initialized (Em28xx Audio Extension) extension
Jan 10 14:28:41 raspberrypi kernel: [  497.484165] xc2028 2-0061: attaching existing instance
Jan 10 14:28:41 raspberrypi kernel: [  497.484197] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
Jan 10 14:28:41 raspberrypi kernel: [  497.484209] em2882/3 #0: em2882/3 #0/2: xc3028 attached
Jan 10 14:28:41 raspberrypi kernel: [  497.484224] DVB: registering new adapter (em2882/3 #0)
Jan 10 14:28:41 raspberrypi kernel: [  497.484255] usb 1-1.2: DVB: registering adapter 0 frontend 0 (Micronas DRXD DVB-T)...
Jan 10 14:28:41 raspberrypi kernel: [  497.495773] em2882/3 #0: Successfully loaded em28xx-dvb
Jan 10 14:28:41 raspberrypi kernel: [  497.495816] Em28xx: Initialized (Em28xx dvb Extension) extension
Jan 10 14:28:41 raspberrypi kernel: [  497.606918] Registered IR keymap rc-hauppauge
Jan 10 14:28:41 raspberrypi kernel: [  497.607638] input: em28xx IR (em2882/3 #0) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/rc/rc0/input0
Jan 10 14:28:41 raspberrypi kernel: [  497.607709] rc0: em28xx IR (em2882/3 #0) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/rc/rc0
Jan 10 14:28:41 raspberrypi kernel: [  497.608173] Em28xx: Initialized (Em28xx Input Extension) extension

Για αρχή ας δοκιμάσουμε να εγκαταστήσουμε αυτά:

opkg install kernel-module-em28xx
opkg install kernel-module-em28xx-alsa
opkg install kernel-module-em28xx-dvb
opkg install kernel-module-em28xx-rc
opkg install kernel-module-tveeprom

opkg install firmware-xc3028-v27
opkg install firmware-xc3028l-v36

reboot

Μάλλον κάτι του λείπει, υπάρχει και τρόπος να βάλουμε τα πάντα, αλλά ας το αφήσουμε για πιο μετά, αν δεν βγάλουμε άκρη.

Υπάρχει πιθανότητα να χρειάζεται και κάποιο patch επιπλέον.

Γενικότερα σε Linux (πχ ubuntu κλπ) δουλεύει το stick;

[mcelliot_g]

Σήμερα έβαλα το hauppauge DVB-T stick στον OSmini. Αυτό που παρατήρησα είναι ότι υπάρχει αισθητή καθυστέρηση στο ζάπινγκ και σε αυτό σε σχέση με τον kernel 4.3, οπότε μάλλον κάτι τρέχει με το vtuner σε kernel 4.5.
Επίσης έχει χαλάσει η απεικόνιση σε db, τώρα δείχνει μόνιμα 0.2db!

[medousa89]

ευχαριστω για την αμεση απαντηση
το προβλημα ειπερχε σε ubuntu (εδω), αλλα και σε enigma κτλ
θα το δοκιμάσω και σας λεω

[medousa89]

τιποτα

[athoik]

Δοκίμασε να βάλεις όλα τα kernel modules, τουλάχιστον με όλα τα modules εγκατεστημένα θα ξέρουμε ό,τι δεν του λείπει κάτι..

opkg update && opkg install kernel-modules

Ας δούμε μετά πάλι τι error βγάζει.

ΥΓ. Βάλε και το παρακάτω νομίζω ότι το θέλει.

echo options em28xx card=54  > /etc/modprobe.d/em28xx.conf

[medousa89]

το δοκιμαζω και σας λεω
την δοκιμασα σε Ubuntu 14.04.4 LTS και ειναι οκ