Jack the Ripper - JTR by gutemine

[sat gr]

Jack the Ripper - JTR



The following things need to install it before the Jack the Ripper plugin can be installed: : In this thread, Dr. Chaos has generously nandsim the modules are available You Obtained for your box and installed it. Then you need the experimental OE 2.0 feed your box jeweiils the ubiattach and the ipk ubidetach So on Thank you for your interest in Dreambox Update make the search. DMM original image or in a well-stocked feed would have to go: opkg update opkg install mtd-utils-ubiattach opkg install mtd-utils-ubidetach Further down in the thread for my current OE IPKS are appended 2.0 image search for the lazy. Then you install the ipk JTR from here and reboot the box. should be in the plugin list already a JTR be seen. You then have only one of the image files from the ZIP competitors on / media / hdd copy / backup (the place can change to blue in the plugin as well) and then you should already be able to choose this green image to convert. Please Tellows forget BEFORE converting the settings to select a model!! And if it is done one has converted a normal nfi to flash for its box / media / hdd / backup
LG gutemine


Thx gutemine

Download enigma2-plugin-extensions-jtr_0.5.6_all.ipk

[sat gr]

Yes you're reading it right OpenPLi 4.0.

@ gjstroom compiled this image from the Openpli Oe Core 'upstream' branch which will become OpenPLi 4.0 when it's finished.
The standard build didn't boot, but 'Jack the Ripper' did his magic and now the image works.
I don't know what's different in this image, at least it shows OpenPLi 4 at the informations screen :)

Read this topic for more information.
You can download the converted 800 se image ^here.
You can use the normal flash procedures, of course an original box or sim a8p is required !

note: this is also not a (late) April 1st joke !