Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Rambo Boot-Plugin "nfi image booten / flashen "

  1. #1

    Thumbs up Rambo Boot-Plugin "nfi image booten / flashen "

    rambo 0.9.10

    OK, ich habe jetzt mal einen neuen relasten kit 0.9.10 auf die erste Seite gemacht, da ist das Filehandling so wie vorgeschlagen angepasst, also die imagename.nfi werden beim ersten boot in ein imagename.jffs2 befreit und dann gelöscht weil nicht mehr nötig.

    Man kann auch problemlos vorherige rambo installationen aktualisieren indem man das neue ipk drüber installiert (wie üblich geht das auch bei aktivem rambo image), diese werden dann entsprechend migriert.

    Und ja der kit läuft jetzt auch wieder 3 Monate (also bis in die Adventzeit).

    Bitte ausgiebig testen und berichten!

    LG
    gutemine
    Thx gutemine
    Last edited by sat gr; 08-09-12 at 15:39. Reason: αφαίρεση συνημμένου

  2. #2

    Απ: Rambo Boot-Plugin "nfi image booten / flashen "

    rambo 0.9.13



    Thx gutemine
    Attached Files Attached Files

  3. #3

    Απ: Rambo Boot-Plugin "nfi image booten / flashen "

    καλησπέρα σε όλα τα μέλη,

    πιστεύω να ρωτώ στο σωστό σημείο του forum......ακολούθησα κατά γράμμα τις οδηγίες εγκατάστασης του rambo plugin, όπως περιγράφονται στο αντίστοιχο οδηγό του http://www.satdreamgr.com/forum/plug...o-plugin-5923/ που έχει αναρτηθεί από το μέλος μας 29gx30 και τον ευχαριστώ, μετά την εγκατάσταση και την επανεκκίνηση του δέκτη (original DM800se) ο δέκτης κολλάει στη ip (192.168.1.XX) σε αντίστοιχο mode με εκείνο όταν προετοιμάζουμε τον δέκτη πριν φορτωθεί με νέο image ή backup, (παρατεταμένα το front button ώστε να πάρει ip από το router και να περάσουμε νέο image στην flash μέσω web browser), κάνω κάπου λάθος στην διαδικασία? χρειάζεται κάποια πρόσθετη ενέργεια ? όσες φορές και να προσπάθησα είχα το ίδιο αποτέλεσμα, οποιαδήποτε γνώμη-βοήθεια ευπρόσδεκτη!!
    androsat

  4. #4

    Απ: Rambo Boot-Plugin "nfi image booten / flashen "

    Καλησπέρα,

    τελικά μετά από ψάξιμο σε σχετικά forums, χρειάζεται μέσω telnet στην ip που δείχνει ο δέκτης, να πάμε στο Boot menu (Dreambox advance setup utility) και να ορίσουμε πως θα κάνει boot o δέκτης, δουλεύει το addon κανονικά όπως περιγράφει το μέλος μας.
    androsat

  5. #5

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,782
    Rep Power
    2484982

    Απ: Rambo Boot-Plugin "nfi image booten / flashen "

    kernel-rambo_0.10





    [IMG]http://desmond.**************/Himg843/scaled.php?server=843&filename=infosk.jpg&res=medium[/IMG]

    rambo das etwas seltsame nfi Image booten und Flash erweitern - TESTKIT für UBIFS
    Hi !

    rambo 0.10.0 ist NUR für ganz aktuelle OE 2.0 Images

    Man installiert also einfach in ein ganz aktuelles OE 2.0 Image das rambo ipk:

    opkg install /tmp/kernel-rambo*.ipk

    Und wie benutzt man rambo ?

    Einfach einen USB stick oder CF/SD Karte als ext4 (bzw. auf der alten 800er als ext3) formatieren (FAT geht jetzt aber auch ist aber langsamer) und das gewünschte nfi image drauf kopieren, das natürlich auch ein backup image sein kann.

    Das Kopieren kann man auch mit dem Flash Feature vom aktuellen dFlash erledigen lassen, wenn man dort das Flashtool auf rambo stellt.


    Beim ersten Boot wird das nfi Image befreit (also das imagename.jffs2 extrahiert und z.B. auf 256 MB aufgeblasen - mehr oder weniger gehen über einen Kernel Parameter), ab dann bootet die Dreambox ganz normal nur halt mit der 256MB großen root vom rambo device.

    Und ja wenn man das rambo device absteckt, sollte das Image im Flash auch noch ganz normal booten, weil rambo jetzt keine Zivilisten mehr eliminiert :-)

    PS: Wenn man jetzt im rambo image auf einer 800se oder 500hd ein /media/squashfs-images/squeezeout directory anlegt wird auch das squashfs eliminiert so wie beim SqueezeOut und mit rambo 99 kann man die squashfs files auch wieder recovern.

    LG
    gutemine


  6. #6

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,782
    Rep Power
    2484982

    Απ: Rambo Boot-Plugin "nfi image booten / flashen "

    rambo 0.10.1





    [IMG]http://desmond.**************/Himg843/scaled.php?server=843&filename=infosk.jpg&res=medium[/IMG]

    Fix problem DM7020hd & 8000

    LG
    gutemine


  7. #7

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,782
    Rep Power
    2484982

    Απ: Rambo Boot-Plugin "nfi image booten / flashen "

    rambo 0.10.2





    [IMG]http://desmond.**************/Himg843/scaled.php?server=843&filename=infosk.jpg&res=medium[/IMG]
    ..Version 0.10.2 vom rambo wo hoffentlich das Problem mit der alten 800 gefixed ist, bitte testen und berichten.

    PS: Bevor falsche Erwartungen entstehen, auf der alten 800 geht natürlich nur jffs2 kein ubifs, aber das jffs2 sollte eben auch weiterhin funktionieren
    LG
    gutemine


  8. #8

    Thumbs up Απ: Rambo Boot-Plugin "nfi image booten / flashen "

    rambo 0.10.4 kit


    . 0.10.4 I have you now a kit of rambo uploaded on the first page where both UBIFS and JFFS2 images should work again whether this is really so, as usual, of course you have to find out yourself :-) Have fun testing! PS: are all functions such as squeeze-way and turned back to disks in another, so far, the kit should be fully functional within my means again.

    Thx gutemine

    SatDreamGr

  9. #9

    Απ: Rambo Boot-Plugin "nfi image booten / flashen "

    SatDreamGr

  10. #10

    Thumbs up Απ: Rambo Boot-Plugin "nfi image booten / flashen "

    rambo 0.12


    Code:
    rambo something strange nfi Image boot and Extending Flash - Released Kit for UBIFS and JFFS2 
    ! hi rambo 0.12 ONLY for all current OE 2.0 Images So you just installed in a very recent OE 2.0 Image rambo the ipk: opkg install / tmp / kernel rambo-*. ipk And how to use rambo? Simply connect your USB stick or CF / SD card as ext4 (or on the old 800 as ext3) formatted (FAT but is now also but is slower) and the desired image nfi copy it which can of course also be a backup image, or in the case of UBIFS must be even, so that the volume size can be adjusted when you save. Copying can also be done with the flash feature on the current dFlash when there the flash tool rambo is on. During the first boot nfi Image is freed (that extracts the imagename.jffs2 and as inflated to 256 MB - more or less go through a kernel parameter), then boot from the Dreambox normally just stop with the 256MB large root . device by rambo rambo And yes if the device mark out the image in the flash should still boot normally because rambo now no more civilians eliminated :-) PS: If you now in rambo image on a 800se 500hd or a / media / squashfs-images/squeezeout directory also creates the squashfs is eliminated as the squeeze-out and rambo 99 can also Recover the squashfs files again. PPS: And for UBIFS Images must be after the installation rambo first dFlash an appropriate backup with greater volume size make and in 8000 also turn off the subsections, otherwise nothing will be. But the users have also tested the brave know so long ago ...
    LG gutemine

    SatDreamGr

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WELCOME TO "Vu+ Plugin Awards 2013"
    By sat gr in forum Περί VU Enigma 2
    Replies: 0
    Last Post: 25-02-13, 02:57
  2. EPG "plugin" για TVHeadend
    By homo_tsiftis in forum ..Περί Dreambox Enigma2
    Replies: 0
    Last Post: 02-01-13, 14:15
  3. Rambo Boot-Plugin "nfi image booten / flashen "
    By korn in forum Multiboot Dream E2
    Replies: 1
    Last Post: 10-06-12, 18:13
  4. "Glitz", "Cartoon Network HD" και "Boomerang HD".
    By djdiageo in forum Δορυφορικές λήψεις
    Replies: 0
    Last Post: 22-09-11, 17:01
  5. "TNT HD","DISNEY HD" & "EQUIDIA LIFE" στις 19.2°Ε.
    By djdiageo in forum Δορυφορικές λήψεις
    Replies: 0
    Last Post: 22-09-11, 17:00

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •