Page 1 of 3 123 LastLast
Results 1 to 10 of 24
  1. #1

    back up image for Vu+ Ultimo

    Mod lonas Vu+ Ultimo [Black Hole 1.7.1]

    Caracterνsticas:

    * Kernel Kernel 3.1.1#1
    * Enigma2: 20-01-2012-vuplus_experimental.
    * Image: BlackHole 1.7.1 - Mod lonas. [Versiσn Estable]
    * Webinterface: Versiσn Vu+.
    * Versiσn Distro : Vuplus 2.2.0.
    * Plugins: Meoboot, Mitube CrossEPG y plugins de fαbrica
    * Drivers TDT Chipset: por defecto trae para Volar Green (A835) se instalan desde el blue panel.
    * Soporte Wireles
    * Adoons default Blackhole.
    * Actualizados logos de arranque Mod lonas.
    * Bootlogo en respeto al trabajo de los componentes de Anonymous
    * Instalada alguna que otra utilidad mas para poder correr las tres emus.
    * Traduciσn Reposo/Reiniciar Correcta.
    * Skin por defecto blackhole .
    * Modificado General en imagen, suprimida opciones y aρadidas nuevas opciones.
    * Ahora puedes actualizar automαticamente desde el manager software (menu imagen).
    * Aρadido Socat para funcionar las tres emuladoras correctamente.
    * Actualizados modules y drivers a ϊltima versiσn .
    * Instaladas Emus CCcam 2.1.3, MboX0.23.4R, SBox 0.0.4-8#2 Public.
    * Aρadidos Scripts para poder iniciar las emuladoras de diferentes maneras.
    * El Script [|Mbox| CCcam Sbox] permite Ver por Mbox y compartir por CCcam y Leer la card por Sbox .
    * El Script [|CCcam| mbox Sbox] permite Ver por CCcam, compartir por Mbox y Leer la card por Sbox.
    * El Script [CCcam - Sbox] permite Ver por CCcam, compartir por CCcam y leer la card por Sbox.
    * El Script [CCcam] permite Ver y compartir solo por CCcam y leer la card por CCcam.
    * El Script [Mbox - Sbox] permite Ver y compartir por Mbox y leer la card por Sbox
    * El Script [Mbox] permite Ver y compartir por Mbox, no lee card ninguna.
    * Posibilidad de Aρadir a cada cam tantas card como quiera mediante enlaces .
    * Programaciσn de funciones automaticas para efectuar correctamente el intercambio entre cams.
    * Imagen Modificada por lonas .
    * Configurada la imagen para card Digital+ Blanca, si se desea otra cambien los providers por los vuestros.
    * Modificado Terrestrial.xml para Espaρa
    * Aρadido script startscripts.sh el cual permitirα arrancar todo aquello que quieras desde el.
    * Aρadido Script Borrafakes.sh del compi cthulhufhtagn
    * Aρadido Script cwsort.sh del compaρero cthulhufhtagn ordenado pro proveedor de la tierra,seguido de virtuales
    * Aρadido Borraoffs del compi cthulhufhtagn
    * Aρadido script waitpid0000.sh del compi pinguino_rh
    * Aρadida funciσn ntpdate en todos los scripts para poner en hora sin necesidad de estar conectada la antena.
    * Aρadido cron reinicio automαtico todos los dνas a las 04:00
    * Aρadido cron apagado automαtico (standby) todos los dνas a las 04:15
    * Aρadido cron para Liberar memoria todos los dνas a las 04:50
    * Aρadido script sboxtest.sh que controla si el sbox se cae en algϊn momento y lo reinicia automαticamente
    * Aρadido arranque automαtico de el sboxtest.sh en todos los scripts con SBOX
    * Actualizados Ident.info e Ignore.list a fecha 28-01-2012
    * Actualizado CCcam.providers a fecha 28-01-2012
    * Eliminado skin por defecto y aρadido BlackShadow3
    * Corregido pequeρos problemas con el NTupdate, ahora si actualiza la hora y genera el log
    * Corregidos problemas encontrados en los arranque de los diferentes scripts que hay en la imagen
    * Modificadas muchas cosas mas que ahora no recuerdo

    Tips: Mod lonas Vu+ Ultimo [Black Hole 1.7.1]

    The TDT is detected only in the installation of this, so be sure to have you clicked on the USB before installing.

    The wireles more of the same, be sure to have stuck to install the image first.

    Controlαis emulations from the blue button, plugins in the green.

    You no longer need several canvases Mod, with this you decide which to use Emu, which do not use can be safely deleted ....

    Any questions regarding the image I beg you please put yourselves in a new thread in one section of Vu + (Vu + pictures no one)

    It can be installed in 2 ways, one is USB and the other is by Attachment 3001 (DreamUp Vu +)

    The Zip file format brings the two inside, USB and NFI

    It can be used in different ways:

    -------------------- ----------------------------
    * [| Mbox | CCcam sbox] allows for Mbox View and share and read by CCcam card for sbox.
    * [| CCcam | sbox mbox] allows Browse by CCcam, Mbox shared by and read the card for sbox.
    * [CCcam - sbox] allows for CCcam See, share and read by CCcam card for sbox.
    * [CCcam] to view and share single and read by CCcam CCcam card for.
    * [Mbox - sbox] to view and share for Mbox and read the card for sbox.
    * [Mbox] to view and share for Mbox card does not read any.


    The Zip file format brings the two inside, USB and NFI--Mεγεθος στο zip 148 mb
    NFI-Mod_Lonas_BlackHole171-Vu+Ultimo
    USB-Mod_Lonas_BlackHole171-Vu+Ultimo


    HTML Code:
    https://rapidshare.com/files/1611534567/ModLonas02-Vu-Ultimo.zip
    p.a.r.a.b.o.l.es.a.l.u.t

  2. #2

    Απ: back up image for Vu+ Ultimo

    Back Up Vu+ Ultimo Images
    PHP Code:
    [COLOR="#0000FF"][HTML]Turkuaz Team Mod Pli (01.02.2012VuUltimo
    First of all
    the latest version of the Pli Official Site of the new image to usb from the download and installing cihazımızaVu Ultimo'ya how the image is thrown from USB? (Contacts).

    After installation to be done after the installation settings:: (2) Vu + Duo initial setup settings


    Quote:

    Seçilidi HDMI.
    1080i is selected.
    Language Turkish is selected.

    Where You can call this channel channel list or we can install ready.

    To search for detailed information about the channel: (4) Vu + Duo channel search and bookmark create

    We need to establish Webinterface to install any plug-in Channel List. For this

    Menu => Add-ons section of the press came and Kumandamızın Green (Add-on Download) is pressed. Downloading add-in information ... please wait ... A message on the screen in the form of a period of time after their stay will be a list of system plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category. Here you find the extensions under the category of plug-in webinterface_old kumandamızın on the OK button is pressed while.

    Cihazımızı re-launching plug-in order to be effective.

    We check the network settings using.

    Menu> Setup> System> Network section of the "Network hardware settings" kumandamızın come on "OK" button is pressed.

    Under the section for the current settings to take note of the IP address. (Channel settings when loading the editor need not to enter the value of the rope.)

    If the link I gave on the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure

    Now we can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).

    Quote:

    Backupda Channel List TurkuazPanel '
    loaded from.

    Quote:

    VU Plus HDTV Channel Setting on the setting of the current channel is loaded.
    (
    November 142011 4 SatelliteTurksatHotbirdAstra 19.2 and EutelsatW3Hellassat In additionEurobird9EutelsatW2 and Astra (Sirius4.8 satellites have been added.)
    Galaxy2002

    Menu
    SetupSatellite ConfigurationSettings section came Tuner Tuner configuration.

    Quote:

    A tuner: (SimpleDiSEq A D42 ° 13 ° 7 ° 19.2 °
    Tuner B
    : (advancedDisegC 1.142 ° 13 ° 7 ° 19.2 ° 39 ° 9 ° 4.8 ° 16 °

    Quote
    :

    MenuSetupSystemAudio Video settings section to come
    4
    :3 content is as followsJust Scale
    16:9 content is as followsJust Scale
    changed to
    Green Key (OK), with the changes noted.

    Quote:

    Time zone: (GMT +02:00AthensIstanbulMinsk

    Determination of the initial channel
    :

    Quote:

    Channel List, while the point of the channel you want to begin the startup.

    Press the Menu key.

    The drop-down optionspress the OK button on your remote control set-point as the stratup service.

    When you restart your device to open the channel you want.

    If 
    you want to cancel this process so if you want the latest on what channel you turned off the opening of the channel;

    While 
    the Channel List, press the Menu key.

    Service as the startup option to stop using the drop-down optionspress the OK button on your remote control point.

    Quote:


    set as the startup serviceChannel D

    Add
    -on (plugininstalls are doing:

    Menu => Add-ons section of the press came and Kumandamızın Green (Add-on Downloadis pressedDownloading add-in information ... please wait ... A message on the screen in the form of a period of time after their stay will be a list of system plugins into categoriesWhen you press the OK button on your remote controlpoint to the categories of any plug-ins will be listed in that category.

    Quote:

    Add-on manager;
    under systemplugins Autoresolution,
    under systemplugins Setpasswd (Password is assigned),
    under systemplugins videoenchancement,
    backupsuite under the category of extensions (8.3),
    bitrateviewer under the category of extensions,
    under the category of extensions cccaminfo
    under the category of extensions dreamexplorer 7.3
    ,
    permanentclock under the category of extensions,
    openwebif under the category of extensions,
    sherlock under the category of extensions (5.1) (help press),
    under the category of extensions showclock (exit, press the key long-term),
    simplerss under the category of extensions (supply address has been entered),
    under the category of extensions virtualzap (press and hold the OK button),
    under the category of extensions vlcplayer
    under the category of extensions weatherplugin
    under the category of extensions youtubeplayer
    established under softcams ccam 2.3.0
    .

    Whenever you install plugins as externalIpk file files via ftp tmp directory after a workout telnette give the following command:
    Code:
    opkg install tmp / *. ipk
    Quote
    :

    Turkuazpanel_0.5_mipsel.ipk established.

    Quote:

    enigma2-plugin-extensions-subtitleplayer_3.10_mipsel.ipk established.

    Quote:

    enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established

    Quote
    :

    Buyukbang panel v.1.1 beta 2 is established. (@ Exenonline)

    Quote:

    file was edited on nStreamPlayer. @ Dursundursun

    Quote
    :

    vu_2.7.10 multiquickbutton-founded.

    Quote:

    enigma2-plugin-extensions-webmedia_5.0-r0_mipsel.ipk established.

    Quote:

    enigma2-plugin-extensions-enhancedmoviecenter_3.0.0_all.ipk established.

    Quote:

    tunisiasat-addons-manager_3.0 was downloaded.

    Our device after restarting;

    Quote:

    Menu => Plugins => tunisiasat-addons-manager_3.0 E-sport came under the first olarakPlugins livefootball (3.4bunder the Plugins-multimedia "Netradioturk_2.6-b" "Netraditurk satation 2.7" was

    Emu are doing the installation
    :

    Emu downloadable add-ons were setup.

    CCcam.cfg file etc folder is located under theServer uses this knowledge to the file server need not to enter.

    CCcam.cfg enter a file server

    key establishment 
    and key update installer we also deal with:

    Hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download tmp folder after sending telnette;
    Code:
    Export MALLOC_CHECK_ 0
    opkg install
    -force-overwrite tmp Hacksat *
    give the command.

    Kurulumlarımızı our config and do the other.

    If 
    we want to install the interface as described in Attachment installations can be done.

    If 
    you wish to install downloadable add-onsplug-in interface or external interface as described in the installation setup can do.

    Quote:

    pli-enigma2-skin-black-white-image_1.0_mipsel.ipk interface is loadedWas chosen as the active interface.

    I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:

    Vu bootlogo replacement program, use of ready-bootlogolar ...

    Quote:

    Bootlogo and changed the radio fund.


    If 
    you want to download picon fileCurrent HD Picon Turksat-W3 (Licher Pils +) Download a copy of the subject piconRemove the folder or folders that you downloaded zipten usr/share/enigma2 picon folder if you have placed in the directory, or create picon folder named after the file permission 755 should be submitted within this folder.

    Quote:

    Uploaded on Türksat picon file ..

    Key Assignments:

     
    Red Short Infobar Record (Record)
     
    Red Long Unassigned
     Green Short browser plugin 
    (Add-on List)
     
    Green Long Unassigned
     Yellow Short Turquoise Panel
     Yellow Long Unassigned
     Blue Short Extension Selection
     Blue Long Unassigned

    Image 
    for the customized according to the above description is a shortcut giving Vu UltimoWho want to download and install and inspect:


    Enjoy ...[/HTML][/COLOR
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

  3. #3

    Απ: back up image for Vu+ Ultimo

    Turkuaz Team Mod AAF 04.02.2012 Vu+ Ultimo

    HTML Code:
    Turkuaz Team Mod AAF 04.02.2012 Vu+ Ultimo
    
    Installation and initial settings: we do:
    
    First of all, the latest version of the new image to usb cihazımıza install all USB Vu + Ultimo'ya how the image will be scored? (Book).
    
    Settings: after installation to be done after installation: (2) initial installation settings Vu + Duo
    
    Quote:
    
    Seηilidi HDMI.
    1080i was chosen.
    Language Turkish is selected.
    DHCP on the network.
    
    At this point you can call the channel list or channel can install ready. If you want to make the tuner settings before you have to do a channel scan.
    
    For more information about how to channel call: (4) Create the favorite channel search and Vu + Duo
    
    Network settings: in-house.
    
    Menu> Setup> System> Network section of the "Network hardware settings" to come on the kumandamızın "OK" button pressed.
    
    Under the section for the current settings to take note of the IP address. (Value not to enter this ip will need to install the channel setting.)
    
    If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure
    
    For experiencing incompatibility with this version of the image Tόrksat AAF channel list before loading will remedy the problem by changing the interface. The interface described later external plugin installation (attached) by the method of installation is the same.
    
    Quote:
    
    pli-enigma2-skin-black-white-image_1.0_mipsel.ipk interface is loaded. Was chosen as the active interface.
    
    Now you can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).
    
    Quote:
    
    TurkuazPanel Backupda Channel List from the installed.
    
    Quote:
    
    VU + Plus the current channel setting on the HDTV Channel Setting is loaded.
    (January 10, 2012 4 Satellite: Turksat, Hotbird, Astra 19.2 and EutelsatW3. Hellassat In addition, Eurobird9, EutelsatW2 and Astra (Sirius) 4.8 was added to the satellites. Added satellites is outdated lists.)
    @ Galaxy2002
    
    Be sure to reboot after installing the device to the channel setting.
    
    Menu> Setup> Satellite Configuration> Settings section to come Tuner Tuner configuration.
    
    Quote:
    
    Tuner A: (Basic) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 39 ° / 9 ° / 4.8 ° / 16 °
    
    Note: Notice that after installing before the tuner ayarlamızı made our list of channels. Thus, because of the possible names of different satellites, satellite broadcasts that can be taken in setting we have prevented errors.
    
    
    Quote:
    
    Menu> Setup> System> Audio / Video settings:
    Go to the content of 4:3 as follows: Just Scale
    > 16: p Go to the content as follows: Just Scale
    Green Key (OK) and recorded.
    
    Quote:
    
    Menu> Setup> System> Button Setup QuickEPG mode of appreciation against the bar as the plugin has been changed to extended.
    
    Extension (plugin) We install:
    
    Menu => Add-ons section to come Kumandamızın Green key (Download Plugin) are pressed. Extension information ... please wait ... The system may display a message in the form of plugins into categories will be listed after their stay. Any point to a category add-ons in that category will be listed when you press the OK button on your remote control.
    
    Quote:
    
    Downloadable add-ons => systemplugins under "setpasswd" (password is assigned),
    Downloadable add-ons => extensions "under the cccaminfo"
    Downloadable add-ons => extensions "under the dreamexplorer (7.4)",
    Downloadable add-ons => extensions "under the enchancedmoviecenter (3.0)",
    Downloadable add-ons => extensions "under the MyTube"
    Downloadable add-ons => extensions "under the openwebif"
    Downloadable add-ons => extensions "under the permanentclock"
    Downloadable add-ons => extensions under the "sherlock (5.1)",
    Downloadable add-ons => extensions "under the showclock"
    Downloadable add-ons => extensions "under the simplerss"
    Downloadable add-ons => extensions "under the subtitleplayer (3.11)"
    Downloadable add-ons => extensions "under the VLCPlayer"
    Downloadable add-ons => extensions "under the weatherplugin"
    Downloadable add-ons => extensions "under the webmedia (5.0)",
    Downloadable add-ons => softcams, under the "CCcam 2.3.0"
    Downloadable add-ons => under softcams, "mgcamd 1.38" was established.
    
    Quote:
    
    Menu => Setup => System => Extended SYSTEMTIME Setting> Time zone: (GMT +02:00) Athens, Istanbul, Minsk
    set as the startup service: Channel D
    
    Want to install external plugins. Ipk file via ftp / tmp directory, throw, then give the following command, and finally to the device, simply restart telnet.
    Code:
    ipkg install / tmp / *. ipk
    Quote:
    
    Important note: Yıkarıdaki shape and you can copy and paste command is doing. In addition, there is no need to type the name of the plugin in. "*. Ipk" refers to all the ipk files with the extension. Tmp folder, the file name without the file extension Dolaysısyla which allows you to install the ipk.
    
    Quote:
    
    Turkuazpanel_0.5_mipsel.ipk established.
    
    Quote:
    
    Nstreamplayer was 0.3 plugin.
    
    Quote:
    
    enigma2-plugin-founded systemplugins-bouquetsprotection_0.1_all.ipk
    
    Quote:
    
    BitrateWiewer established.
    
    Quote:
    
    VirtulaZap established. Long-term press the OK button.
    
    Quote:
    
    Buyukbang panel v.1.1 beta 2 is established. (@ Exenonline)
    
    Quote:
    
    file was edited on nStreamPlayer. @ Dursundursun
    
    Quote:
    
    manager_3.0 download tunisiasat-addons-founded.
    
    After you restart the device on;
    
    Quote:
    
    Menu => Plugins => tunisiasat-addons-manager_3.0 e-sport came under the first olarakPlugins livefootball (3.4b) under the Plugins-multimedia "Netradioturk_2.6-b" + "Netraditurk satation 2.7" and was CccamInfo
    
    Enigma2 plugin extensions are not included in Backupda appletrailer as described above, I recommend to build 0.1 mipsel.ipk plugin download. Must have on your hdd for this extension to work. Hdd during installation are also folders. This is caused by ftp with the / tmp directory after sending telnette ipkg install / tmp / *. Ipk should be established by executing the command.
    
    Emu are doing the installation:
    
    Emu downloadable add-ons were setup.
    
    Cccam.cfg file / usr / k e ys are. Here you can edit the server by entering your information.
    
    Glass was selected as the active CCcam 2.3.0 Backupda.
    
    K ey installer do the establishment and key updating procedures:
    
    hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;
    
    Code:
    export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / hacksat *
    We give the command.
    If the installation fails again, try to give the following command:
    
    Code:
    ipkg update
    After installation, update k ey are doing.
    
    And other settings: kurulumlarımızı do.
    
    If you wish to install downloadable add-ons, plug-in interface or external interface as described in the installation, you can setup.
    
    Quote:
    
    pli-enigma2-skin-black-white-image_1.0_mipsel.ipk interface is loaded. Was chosen as the active interface.
    
    If you want link given below and radio fund bootlogo change by taking advantage of threads:
    
    Vu + Bootlogo replacement program, use, ready bootlogolar ...
    
    Quote:
    
    Değişrtirildi Bootlogo and radio fund ...
    
    
    If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download the file picon the subject. Unzip the downloaded folder or folders, remove the / usr/share/enigma2 / picon folder if you have placed in the directory, or create a folder called picon into this folder will need to send the file permission after making 755.
    
    Quote:
    
    Picon Turksat set is loaded.
    
    After you install the backup settings and add-ons get:
    
    VU + 'ta get backup Duo & Solo USB and NFI
    
    Quote:
    
    Turquoise Backup Panel are from.
    Menu> Add-ons> Turquoise panel> Backup / Restore> Full Backup HDD / USB (Vu Plus series)> Full Backup HDD
    
    Vu + image link in accordance with the above description I give customized for Ultimo. Who want to download and install and inspect:
    
    Good luck ...
    
    Enjoy ...
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

  4. #4

    Απ: back up image for Vu+ Ultimo

    Turkuaz Team Mod BlackHole 1.7.2 Vu+ Ultimo
    Turkuaz Team Mod BlackHole 1.7.2 Vu+ Ultimo

    Installation and initial settings: we do:

    First of all, the latest version of the new image to usb cihazımıza install all USB Vu + Ultimo'ya how the image will be scored? (Book).

    Settings: after installation to be done after installation: (2) initial installation settings Vu + Duo

    Quote:

    Seηilidi HDMI.
    1080i was chosen.
    Language Turkish is selected.
    DHCP on the network.

    At this point you can call the channel list or channel can install ready. If you want to make the tuner settings before you have to do a channel scan.

    For more information about how to channel call: (4) Create the favorite channel search and Vu + Duo

    Network settings: in-house.

    Menu> Setup> System> Network section of the "Network hardware settings" to come on the kumandamızın "OK" button pressed.

    Under the section for the current settings to take note of the IP address. (Value not to enter this ip will need to install the channel setting.)

    If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure

    Now you can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).

    Quote:

    TurkuazPanel Backupda Channel List from the installed.

    Quote:

    VU + Plus the current channel setting on the HDTV Channel Setting is loaded.
    (January 10, 2012 4 Satellite: Turksat, Hotbird, Astra 19.2 and EutelsatW3. Hellassat In addition, Eurobird9, EutelsatW2 and Astra (Sirius) 4.8 was added to the satellites. Added satellites is outdated lists.)
    @ Galaxy2002

    Be sure to reboot after installing the device to the channel setting.

    Menu> Setup> Satellite Configuration> Settings section to come Tuner Tuner configuration.

    Quote:

    Tuner A: (Basic) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 39 ° / 9 ° / 4.8 ° / 16 °

    Note: Notice that after installing before the tuner ayarlamızı made our list of channels. Thus, because of the possible names of different satellites, satellite broadcasts that can be taken in setting we have prevented errors.

    Extension (plugin) We install:

    Menu => Add-ons section to come Kumandamızın Red button (Add-ons) are pressed. Updating the software catalog for a while after their stay at the screen a message that says the system will be a list of plugins into categories. Any point to a category add-ons in that category will be listed when you press the OK button on your remote control. Dimmer can be installed here ekelentilerdir olanalar installed. You want to install (or you want to remove), add-ons by checking the set up here (or remove).

    Quote:

    Extension manager;
    PermanentClock under the System category,
    Setpasswd under the System category (The password is assigned),
    StartUpService under the System category (Channel D),
    VLCPlayer under the Software category,
    SimpleRSS under the category of Multi-media (not active),
    VirtualZap under the category of Multi-media (press and hold an arrow key),
    Plugin Weatheer established under the Multi-media category.

    Install (or uninstall) you want to restart after the operation istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button on the devices, reboot, while providing Kumandamızın.

    In line with other simple settings: do we want:

    Quote:

    Menu> Setup> System> Audio / Video settings
    Go to the content of 4:3 as follows: Just Scale
    > 16:9 content is as follows: Just after the green key to making Scale (OK) acknowledge.
    Menu> Setup> System> Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
    After setting up the Green Key (OK) and acknowledge.
    Menu> Setup> System> Customize section, change the user experience as a specialist in Green Key (OK) and acknowledge.

    Initial determination of channel:

    Quote:

    While the point of the channel you want to begin startup the Channel List.

    Press the Menu key.

    Service options in the drop-down set point as stratup press the OK button on your remote control.

    Channel you want your device will restart.

    This means the latest on what channel you want to cancel operations kapattıysanız want to open that channel;

    While the Channel List, press the Menu key.

    Open the options and press OK on your remote control point to reset the startup service option.

    Quote:


    set as the startup service: Channel D

    Panel Addons Manager can install some plugins are not GH Extension Manager. For this purpose;

    Press the green and yellow, respectively Kumandamızın BH Addons Manager panel and select a row to come. While here kumandamızın Addons Download Manager by pressing OK on the pop-up in Chapter Black Hole Image Plugins can be loaded by pressing the OK button on the plug-ins arrive kumandamızın. While this too, we want to install add-on and then we press the OK button kumandamızın. Plugin will display information about where the short explanations. Here, the green button (Download) to whether we want to do with the download and installation information about the problem buşlunduğu kumandamızın by pressing OK on the setup screen, yes, done.


    Quote:

    DreamExplorer 7.3, Enhanced Movie Center v3.0.0, v5.0 Sherlock WebMedia was 5.0.

    You can set up as described above, Apple Trailer v1.0 addons Mangere. This extension has not been Backupta. Must have on your hdd for this extension to work. Hdd during installation are also folders. Caused by addons with this panel or the / tmp directory needs to be established.

    Want to install external plugins. Ipk file via ftp / tmp directory of the remote, first green, then yellow after laying the drop-down menu, press the "Manual Install Ipk packges" remotes come on "OK" button. Will want to install the ipk file. Kumandamızın was selected even though the "OK" button you can install.

    Quote:

    Turkuazpanel_0.5_mipsel.ipk established.

    Quote:

    Nstreamplayer was 0.3 plugin.

    Quote:

    enigma2-plugin-founded systemplugins-bouquetsprotection_0.1_all.ipk

    Quote:

    ShowClock established. Press and hold the exit button.

    Quote:

    BitrateWiewer established.

    Quote:

    file was edited on nStreamPlayer. @ Dursundursun

    Quote:

    subtitleplayer_3.11 established.

    Quote:

    r0_beta2 buyukbangpanel_1.1-founded.

    Quote:

    manager_3.0 download tunisiasat-addons-founded.

    After you restart the device on;

    Quote:

    Menu => Plugins => tunisiasat-addons-come first livefootball manager_3.0 e (3.4b), and then the plugins tunisiasat "Netradioturk_2.6-b" + "Netraditurk satation 2.7", and finally under the CCcam Info plugin V1. 3c was

    Emu are doing the installation:

    As E2_CCcam_2.3.0_bh.tgz file download / tmp folder, delivered below. Black Hole in the Addons Manager (kumandamızın to come to this section, we press the green and yellow button) Manual Install Bh kumandamızın packges point we press the OK button. While on our file and press OK to re-kumandamızın uşuna press OK on the setup menu that are doing well, yes.

    CCcam.cfg file / etc folder is located under. Server uses the knowledge of this must go to the file server.

    Entering information in the file server Cccam.cfg

    As E2_Mgcamd_138_bh.tgz file download / tmp folder, delivered below. Black Hole in the Addons Manager (kumandamızın to come to this section, we press the green and yellow button) Manual Install Bh kumandamızın packges point we press the OK button. While on our file and press OK to re-kumandamızın uşuna press OK on the setup menu that are doing well, yes.

    As Mgcamd_1.37_E2_bh.tgz file download / tmp folder, delivered below. Black Hole in the Addons Manager (kumandamızın to come to this section, we press the green and yellow button) Manual Install Bh kumandamızın packges point we press the OK button. While on our file and press OK to re-kumandamızın uşuna press OK on the setup menu that are doing well, yes.

    K ey installer do the establishment and key updating procedures:

    hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;

    Code:
    export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / hacksat *
    We give the command.
    If the installation fails again, try to give the following command:

    Code:
    ipkg update
    After installation, update k ey are doing.

    And other settings: kurulumlarımızı do.

    If you want to install the first green and then yellow skin and press on your remote control. Black Hole Addons Manager> Addons Download Manager> Black Hole E2 Skins Image section can come in different skin.

    Quote:

    EleganceHD_P_BH1.7x_VU_V1 interface is loaded. Was chosen as the active interface.

    If you want link given below and radio fund bootlogo change by taking advantage of threads:

    Vu + Bootlogo replacement program, use, ready bootlogolar ...

    Quote:

    Değişrtirildi Bootlogo and radio fund ...


    If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download the file picon the subject. Unzip the downloaded folder or folders, remove the / usr/share/enigma2 / picon folder if you have placed in the directory, or create a folder called picon into this folder will need to send the file permission after making 755.

    Quote:

    Eutelsat set Picon Turksat loaded.

    After you install the backup settings and add-ons get: VU + 'ta get backup Duo & Solo USB and NFI

    Hdd or usb device with the Main Menu BlackHole Full backup can backup.

    Quote:

    Turquoise Backup Panel are from.
    Menu> Add-ons> Turquoise panel> Backup / Restore> Full Backup HDD / USB (Vu Plus series)> Full Backup HDD

    Image for the customized according to the above description for the link I give Vu + Ultimo. Who want to download and install and inspect:

    After installation examine the bookmarked links to the following:

    Black Hole İmajda HDD & USB Mount Operations

    Good luck.
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

  5. #5
    underconstruction's Avatar
    Join Date
    Jun 2011
    Location
    Germany *** Bavaria***
    Posts
    577
    Rep Power
    138

    Mod Vu+ Ultimo [Black Hole 1.7.2]

    Mod Vu+ Ultimo [Black Hole 1.7.2]



    Características:

    Code:
     
      * Kernel  Kernel 3.1.1#1
      * Enigma2: 04-02-2012-vuplus_experimental.
      * Image: BlackHole 1.7.2 - Mod . [Versión Estable]
      * Webinterface: Versión Vu+.
      * Versión Distro : Vuplus 2.2.0. 
      * Plugins: Meoboot, Mitube CrossEPG y plugins de fábrica
      * Drivers TDT Chipset: por defecto trae para Volar Green (A835) se instalan desde el blue panel. 
      * Soporte Wireles
      * Adoons default Blackhole. 
      * Actualizados logos de arranque Mod .
      * Bootlogo en respeto al trabajo de los componentes de Anonymous
      * Instalada alguna que otra utilidad mas para poder correr las tres emus.
      * Tradución Reposo/Reiniciar Correcta.  
      * Skin por defecto blackhole .
      * Modificado General en imagen, suprimida opciones y añadidas nuevas opciones.
      * Ahora puedes actualizar automáticamente desde el manager software (menu imagen).
      * Añadido Socat para funcionar las tres emuladoras correctamente. 
      * Actualizados modules y drivers a última versión . 
      * Instaladas Emus CCcam 2.1.3, MboX0.23.4R, SBox 0.0.4-8#2 Public.
      * Añadidos Scripts para poder iniciar las emuladoras de diferentes maneras.
      * El Script  [|Mbox| CCcam Sbox] permite Ver por Mbox y compartir por CCcam y Leer la card por Sbox .
      * El Script  [|CCcam| mbox Sbox] permite Ver por CCcam, compartir por Mbox y Leer la card por Sbox.
      * El Script [CCcam - Sbox] permite Ver por CCcam, compartir por CCcam y leer la card por Sbox.
      * El Script [CCcam] permite Ver y compartir solo por CCcam y leer la card por CCcam.
      * El Script [Mbox - Sbox] permite Ver y compartir por Mbox y leer la card por Sbox
      * El Script [Mbox] permite Ver y compartir por Mbox, no lee card ninguna.
      * Posibilidad de Añadir a cada cam tantas card como quiera mediante enlaces . 
      * Programación de funciones automaticas para efectuar correctamente el intercambio entre cams. 
      * Imagen Modificada por  .
      * Configurada la imagen para card Digital+ Blanca, si se desea otra cambien los providers por los vuestros.
      * Modificado Terrestrial.xml para España
      * Añadido script startscripts.sh el cual permitirá arrancar todo aquello que quieras desde el.
      * Añadido Script Borrafakes.sh del compi cthulhufhtagn
      * Añadido Script cwsort.sh del compañero cthulhufhtagn ordenado pro proveedor de la tierra,seguido de virtuales
      * Añadido Borraoffs del compi cthulhufhtagn
      * Añadido script waitpid0000.sh del compi pinguino_rh
      * Añadida función ntpdate en todos los scripts para poner en hora sin necesidad de estar conectada la antena.
      * Añadido cron reinicio automático todos los días a las 04:00
      * Añadido cron apagado automático (standby) todos los días a las 04:15
      * Añadido cron para Liberar memoria todos los días a las 04:50
      * Añadido script sboxtest.sh que controla si el sbox se cae en algún momento y lo reinicia automáticamente
      * Añadido arranque automático de el sboxtest.sh en todos los scripts con SBOX
      * Actualizados Ident.info e Ignore.list a fecha 28-01-2012
      * Actualizado CCcam.providers a fecha 28-01-2012
      * Eliminado skin por defecto y añadido BlackShadow3
      * Corregido pequeños problemas con el NTupdate, ahora si actualiza la hora y genera el log
      * Corregidos problemas encontrados en los arranque de los diferentes scripts que hay en la imagen
      * Modificada librería libgcc_s.so que soluciona el Tiempo ECM (-nan) display fix CCCam >> 2.1.3
      * Añadido parche a af9033.ko para USB-TDT
      * Eliminado skin vuplus_HD para ganar espacio en flash
      * Idioma Español por Defecto en la instalación
      * Realojado el idioma Español en segundo lugar tras el Ingles
      * Modificado el web interface por 
      * Corrección de la versión de enigma que trae la imagen
      * Modificadas muchas cosas mas que ahora no recuerdo
      
     ----------------------------------------------------------------------------------------------------------------

    El TDT lo detecta solo en la instalación de esta, así que asegúrate de tenerlo pinchado en el USB antes de instalarla.


    El wireles mas de lo mismo, asegúrate de tenerlo pinchado al instalar la imagen por primera vez.


    Las emuladoras las controláis desde el Botón azul, los plugins en el verde.


    Ya no es necesario varias Mod , con esta vosotros decidís cual Emu usar, la que no uses puedes eliminarla sin problemas....


    Cualquier duda referente a la imagen os ruego que por favor la pongáis en un hilo nuevo en la sección de Vu+ Uno (no imágenes Vu+uno)


    Se puede instalar de 2 maneras, una es por USB y la otra es por Vutil (DreamUP de Vu+)


    El archivo Zip trae los dos formatos en su interior, USB y NFI


    Se puede usar de diferentes maneras:

    ----------------------------------------------------------------------------------------------------------------
    * [|Mbox| CCcam Sbox] permite Ver por Mbox y compartir por CCcam y Leer la card por Sbox .
    * [|CCcam| mbox Sbox] permite Ver por CCcam, compartir por Mbox y Leer la card por Sbox.
    * [CCcam - Sbox] permite Ver por CCcam, compartir por CCcam y leer la card por Sbox.
    * [CCcam] permite Ver y compartir solo por CCcam y leer la card por CCcam.
    * [Mbox - Sbox] permite Ver y compartir por Mbox y leer la card por Sbox.
    * [Mbox] permite Ver y compartir por Mbox no lee card ninguna.
    ----------------------------------------------------------------------------------------------------------------

    No lleva password

    Saludos
    [Only registered and activated users can see links. ]
    Bavaria the real Germany
    I Love my Dreambox DM7020HD

  6. #6

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    28,958
    Rep Power
    24776

    Απ: back up image for Vu+ Ultimo

    Backup BH 1.7.2 D+ HD & Sky Germany (V13)

    for



    by elgeneral

    [Only registered and activated users can see links. ] [Only registered and activated users can see links. ]

    Ready setup Image for reading Cards Sky Germanys V13 and Digital+(Nagracard 1810) by Oscam6376/CCcam2.1.3


    BASEIMAGE:
    Blackhole 1.7.2

    Backup-Image comes along with beautifull Bootlogo by me and 2 Skins installed, HD Glass by shamann & default skin!

    LSK Spinners are installed and made by Aquda too!!



    BOOTLOGO:




    SPINNER

    [Only registered and activated users can see links. ]


    INSTALLED SKINS:


    HD Glass by shamann & default Skin

    Installed Cams:


    Scam 3.60
    GBox.net 804 (TNT Sat SD & HD,CW,IRD2,Nagra,Via and Seca Emu OK)
    MGcamd 1.38 (CW,IRD2,Nagra,Via and Seca Emu OK)
    CCcam 2.3.0 (CW,Nagra,Via and Seca Emu OK)
    CCcam 2.1.3 (CW,Nagra,Via and Seca Emu OK)
    OscamYmod18-T27 (TNT Sat SD & HD,CW,IRD2,Nagra,Via and Seca Emu OK)(you have to activate DVBAPI for that!!)

    Sbox005-2#2
    Sbox005-2#2/cccam2.1.3
    Sbox005-2#2/mgcamd 1.38



    Also following Combos are installed:

    Oscam6376/Mgcamd 1.38 (ready setup to read both Cards,especially its needed to do AU on the D+ Card)
    Oscam6376/CCcam 2.3.0 (ready setup to read both Cards)

    and last but not least
    Oscam6376/CCcam 2.1.3 (ready setup to read both Cards)


    All Cams are installed on BH Base!!!


    INSTALLED PLUGINS :


    • LSK Plugin- you will enjoy the best addons in scene, you no need more always update cams settings plugins skin and etc etc etc :Bench presss:
    • TRR Puglin
    • Airplugin

    MAINCONFIGS:

    SATSETTINGS: MINE (Diseqc A/B / Port A - 19,2°E; Port B - 13°E)

    IP-ADRESS: 192.168.178.22
    OSCAMWEBIF-PORT: 16002
    OSCAMWEBIF-USER: admin
    OSCAMWEBIF-PASS: oscam

    CCCAMWEBIF-PORT: 16001
    CCCAMWEBIF-USER: LSK
    CCCAMWEBIF-PASS: LSK

    LOGIN:
    USER: root
    PASS: LSK

    ATTENTION!!!
    To run the D+ Nagra Card you must have the Box and RSA-Key of this Card! Otherwise it will not work!
    You have to insert them into the oscam.server File which is located at etc/tuxbox/config!


    Special thanks to my friend senns69 to help me understanding the linux world, also to the authors all plugins, skins, bootlogo and more gracias a meu amigo aguda

    Saludos







    [Only registered and activated users can see links. ]

  7. #7

    Thumbs up Vu+ Ultimo Backup Images by sat4fun

    Black Hole Vu+ Ultimo 1.7.2 (media-tree) Backup by sat4fun



    Menu :




    Plugins :







    2xGreen Button = Tspanel



    Cams :







    -=Download Link=-


    [Only registered and activated users can see links. ]

    Do not forget saving your settings from software manager before flashing any new image


    Sat4fun The Satworld Together

  8. #8

    VTI v4.1 BacKup Vu+Ultimo

    VTI v4.1 BacKup Ultimo+ AllVuplus MOD D+ HD & Sky DE HD (V13)


    by elgeneral



    Ready setup Image for reading Cards Sky Germanys V13 and Digital+(Nagracard 1810) by Oscam 1.00 + CCcam2.1.3 also Sbox 0.0.5.2.3 + CCam 2.1.3


    BASEIMAGE:

    VTI v4.1

    Backup-Image comes along with beautifull Bootlogo by elgeneral and Skin installed, Nemesis Glassline by ronaldus & defaults skin

    LSK Spinners are installed and made by Aquda

    BOOTLOGO:




    SPINNER:



    PLUGINS:

    LSK Plugin

    \

    you will enjoy the best addons in scene, you no need more always update cams settings plugins skin and etc etc etc

    TRR Puglin



    SKINS:



    Nemesis Glassline by ronaldus, ***ons is not installed in backup you need download from LSK plugin, TRR plugin or VTI Panel

    SETTINGS

    Astra-Hotbird (Diseqc A/B / Port A - 19,2°E- Port B - 13°E)

    Installed Cams:



    Now SBox 0.0.5.2.3 + CCcam 2.1.3 work fine Sky DE HD v13 card

    LOGIN:

    USER: root
    PASS: LSK

    ATTENTION!!!
    To run the D+ Nagra Card you must have the Box and RSA-Key of this Card! Otherwise it will not work!
    You have to insert them into the oscam.server File which is located at etc/tuxbox/config!

    Special thanks to senns69 & VTI Team, also to the authors all plugins, skins, bootlogo ....


    Code:
    http://www.easybytez.com/ie6d2q495aj6

  9. #9

    Απ: back up image for Vu+ Ultimo

    Image "Gotowiec" OpenPLi Backup- przeznaczony do tunera VuUltimo bardziej dla tych co mniej "umieją"

    Restar enigmy trwa zaledwie 25sek.

    bootlogo:[Only registered and activated users can see links. ]


    Umieszczam backup do testowania (ver.beta) :P
    image można codziennie aktualizować z pilota nie ma potrzeby wgrywania na nowo
    Ważne !!!
    po każdej aktualizacji należy w OpenPanel użyć scriptu :
    Przywróć ustawienia GUI sprzed aktualizacji image (nie mylić z fabrycznymi)
    robimy to z poziomu pilota : czerwony/żółty/czerwony
    z image usunięto nie potrzebne pliki
    polecam skina "elegato-hd-metal-transp mod by Holi&Gutosie"
    bardzo szybki skin


    bardzo dobra szybkość i jakość obrazu ustawiona pod plazmę
    image najlepiej instalować w pamięci flash nie w meoboot ponieważ traci znacznie na szybkości i stabilności
    zaraz po wgraniu należy:
    ustawić sieć , strefę czasową , konfigurację tunera
    co do listy to lepiej nie wgrywać nowej a ustawić istniejącą pod własne "widzi mi się" :P a to dlatego że lista jest bardzo ważna a ta w image jest b.szybka , jak chcesz dodać nowy kanał to trzeba zrobić ręczne skanowani i przenieść z pilota wybrany kanał do bukietu w ulubionych
    dla sprawdzenia proszę zrobić test restartu enigmy na wgranej liście trwa on 20-25sek a już z inna lista restart GUI trwa o wiele dłużej
    z image została usunięta lista DVB-T , trzeba przywrócić plik plik terrestrial.xml [Only registered and activated users can see links. ] + symlink(pytać na PW to napiszę jak)
    Picony
    jesli ktoś chce umieścić picony w lokalizacji /media/usb to należy usunąć istniejące z pamięci flash, znajdują się w:
    /usr/share/enigma2 picon i piconlcd następnie
    pobrać z sieci paczkę picon , wkleić do katalogu /tmp i zainstalować
    można tez przekopiować te już istniejące w pamięci tuner
    [Only registered and activated users can see links. ]
    lub pobrać wkleić ręcznie po FTP do katalogu /media/usb
    hasła w image nie ma , aby się połączyć z tunerem po FTP należy w login wpisać root a w okienko hasła "kliknąc" , nic nie wpisywać , zostawić puste i z klawiatury Enter, jak już nam się uda połączyć z tunerem to zmieniamy hasło , aby zmienić wpisujemy w okno konsoli polecenie : passwd [Only registered and activated users can see links. ]


    W image zainstalowałem kilka Plugins raczej nie dostępnych z feed , resztę wtyczek możecie doinstalować lub usunąć wedle uznania
    bootlogo.mvi nie ma , jak ktoś chce to proszę wkleić do /etc/enigma2


    Backup PLi Ultimo z picon w pamięci flash :
    [Only registered and activated users can see links. ]
    image wgrać do pamięci FLASH > nie do MeoBoot !!!

    ______############_______########___________

    Poprawiona ver. backupa OpenPLi2.1
    wydanie z dnia: 25.03.2012
    Przebieg instalacji taki sam jak opisałem wyżej w poprzedniej ver. backupa
    Proszę przeczytać przed instalacją !
    dodałem nowe skiny i poprawiłem kilka rzeczy
    w image jest uruchomiony Timeshift, jak ktoś nie używa to proszę w Pluginie wyłączyć (Enable - Nie)
    Jak będą problemy z współpracą diseqc to proszę zainstalować inna listę kanałów

    nowe bootlogo


    radio


    odświeżony i poprawiony skin Elegato


    polski OpenPanel


    dzięki uprzejmości kol@holi dodałem pilot HELP z Ultimo, teraz pomaga dość poprawnie - dzieki @Holi




    Cztery Skiny
    aby zmienić skórkę robimy kolejno z pilota:
    /menu/Ustawienia/System/Skiny i wybieramy skin, następnie zatwierdzamy wciskając OK

    dodatkowo do pobrania kilka plików splash_cfe_auto czyli pierwsze bootlogo,
    wgrywamy identycznie jak image, wystarczy umieścić jeden plik w folderze ultimo
    foto:
    pobierz :[Only registered and activated users can see links. ]


    w image zainstalowano :
    picon i piconlcd (w pamięci flash boxa)
    cccam213
    oscam-stable
    mgcamd138

    UWAGA!
    plik satellites.xml w lokalizacji /etc/enigma2 zawiera tylko częstotliwości polskich kanałów z satelit 13e i 19e dlatego też nie współpracuje z diseqc 4/1 lub wyższym a więc proszę zainstalować inną listę np. djcrash jest do pobrania z pilota w OpenPanel

    /czerwony/żółty/zielony

    Zaraz po instalacji image proszę zaktualizować liste pakietów używają scriptu znajdującego się w OpenPanel/Menadzer skryptów/Zaktualizuj listę pakietów > OPKG Update + Upgrade
    Ważne!
    Proszę pamiętać aby po każdej aktualizacji image z pilota, użyć scriptu do przywracania ustawień. Script jest w OpenPanel(u) i nazywa się: Przywróć ustawienia GUI sprzed aktualizacji Image

    dodatkowo proponuje z poziomu PC usuń po FTP Pluginy i Skiny których nie używamy
    skiny w lokalizacji : /usr/share/enigma2
    pluginy w lokalizacji: /usr/lib/enigma2/python/Plugins (Extensions i SystemPlugins)

    image BackupOpenPLi2.1:
    [Only registered and activated users can see links. ]

    pzdr gutosie



  10. #10

    Απ: back up image for Vu+ Ultimo

    BlackHole 1.7.3 Backup @isayuksel Vu+ Ultimo

    Code:
    Installation and initial settings: we do:
    
    First of all, the latest version of the new image to usb cihazımıza install all USB Vu + Ultimo'ya how the image will be scored? (Book).
    
    Settings: after installation to be done after installation: (2) initial installation settings Vu + Duo
    
    Seçilidi HDMI.
    1080i selected.
    Language Turkish is selected.
    DHCP on the network.
    At this point you can call the channel list or channel can install ready. If you want to make the tuner settings before you have to do a channel scan.
    
    For more information about how to channel call: (4) Create the favorite channel search and Vu + Duo
    
    Network settings: in-house.
    
    Menu> Setup> System> Network section of the "Network hardware settings" to come on the kumandamızın "OK" button pressed.
    
    Under the section for the current settings to take note of the IP address. (Value not to enter this ip will need to install the channel setting.)
    
    If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure
    
    Now you can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).
    
    TurkuazPanel Backupda Channel List from the installed.
    
    VU + Plus the current channel setting on the HDTV Channel Setting is loaded.
    (April 7, 2012 the 9th ranked list of 10 satellites installed. EPG added bouquet. @ Galaxy2002
    Be sure to reboot after installing the device to the channel setting.
    
    Menu> Setup> Satellite Configuration> Settings section to come Tuner Tuner configuration.
    
    Tuner A: (Basic) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 39 ° / 9 ° / 4.8 ° / 16 °
    Note: Notice that after installing before the tuner ayarlamızı made our list of channels. Thus, because of the possible names of different satellites, satellite broadcasts that can be taken in setting we have prevented errors.
    
    Extension (plugin) We install:
    
    Menu => Add-ons section to come Kumandamızın Red button (Add-ons) are pressed. Updating the software catalog for a while after their stay at the screen a message that says the system will be a list of plugins into categories. Any point to a category add-ons in that category will be listed when you press the OK button on your remote control. Dimmer can be installed here ekelentilerdir olanalar installed. You want to install (or you want to remove), add-ons by checking the set up here (or remove).
    
    Extension manager;
    PermanentClock under the System category,
    Setpasswd under the System category (The password is assigned),
    StartUpService under the System category (Channel D),
    VLCPlayer under the Software category,
    SimpleRSS under the category of Multi-media (not active),
    VirtualZap under the category of Multi-media (press and hold an arrow key),
    Plugin Weatheer established under the Multi-media category.
    Install (or uninstall) you want to restart after the operation istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button on the devices, reboot, while providing Kumandamızın.
    
    In line with other simple settings: do we want:
    
    Menu> Setup> System> Audio / Video settings
    Go to the content of 4:3 as follows: Just Scale
    > 16:9 content is as follows: Just after the green key to making Scale (OK) acknowledge.
    Menu> Setup> System> Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
    After setting up the Green Key (OK) and acknowledge.
    Menu> Setup> System> Customize section, change the user experience as a specialist in Green Key (OK) and acknowledge.
    Initial determination of channel:
    
    While the point of the channel you want to begin startup the Channel List.
    
    Press the Menu key.
    
    Service options in the drop-down set point as stratup press the OK button on your remote control.
    
    Channel you want your device will restart.
    
    If you want to cancel this process, ie if you want the latest on what channel you turned off the opening of the channel;
    
    While the Channel List, press the Menu key.
    
    Open the options and press OK on your remote control point to reset the startup service option.
    
    set as the startup service: Channel D
    Panel Addons Manager can install some plugins are not GH Extension Manager. For this purpose;
    
    Press the green and yellow, respectively Kumandamızın BH Addons Manager panel and select a row to come. While here kumandamızın Addons Download Manager by pressing OK on the pop-up in Chapter Black Hole Image Plugins can be loaded by pressing the OK button on the plug-ins arrive kumandamızın. While this too, we want to install add-on and then we press the OK button kumandamızın. Plugin will display information about where the short explanations. Here, the green button (Download) to whether we want to do with the download and installation information about the problem buşlunduğu kumandamızın by pressing OK on the setup screen, yes, done.
    
    Enhanced Movie Center v3.0.0, v6.0 Sherlock WebMedia was 5.0.
    You can set up as described above, Apple Trailer v1.0 addons Mangere. This extension has not been Backupta. Must have on your hdd for this extension to work. Hdd during installation are also folders. Caused by addons with this panel or the / tmp directory needs to be established.
    
    Want to install external plugins. Ipk file via ftp / tmp directory of the remote, first green, then yellow after laying the drop-down menu, press the "Manual Install Ipk packges" remotes come on "OK" button. Will want to install the ipk file. Kumandamızın was selected even though the "OK" button you can install.
    
    Established Turkuazpanel_0.6.3_mipsel.ipk ..
    ShowClock established. Press and hold the exit button.
    BitrateWiewer established.
    subtitleplayer_3.11 established.
    V.1.2.1 Buyukbang Panel was established. (@ Exenonline)
    manager_3.0 download tunisiasat-addons-founded.
    After you restart the device on;
    
    Menu => Extensions => tunisiasat-come first to addons-manager_3.0 livefootball (3.6b), and then the plugins tunisiasat "Netradioturk_2.6-b" and finally under the plugin was CCcam Info V1.3c
    Emu are doing the installation:
    
    As E2_CCcam_2.3.0_bh.tgz file download / tmp folder, delivered below. Black Hole in the Addons Manager (kumandamızın to come to this section, we press the green and yellow button) Manual Install Bh kumandamızın packges point we press the OK button. While on our file and press OK to re-kumandamızın uşuna press OK on the setup menu that are doing well, yes.
    
    CCcam.cfg file / etc folder is located under. Server uses the knowledge of this must go to the file server.
    
    Entering information in the file server Cccam.cfg
    
    As E2_Mgcamd_138_bh.tgz file download / tmp folder, delivered below. Black Hole in the Addons Manager (kumandamızın to come to this section, we press the green and yellow button) Manual Install Bh kumandamızın packges point we press the OK button. While on our file and press OK to re-kumandamızın uşuna press OK on the setup menu that are doing well, yes.
    
    070 v4 Btkcam established manually. btkcam.cfg file / usr / k e y s are. Blink is not available. Need to add yourself.
    
    K ey installer do the establishment and key updating procedures:
    
    hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;
    
    Code:
    export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / hacksat *
    We give the command.
    If the installation fails again, try to give the following command:
    
    Code:
    ipkg update
    After installation, update k ey are doing.
    
    And other settings: kurulumlarımızı do.
    
    If you want to install the first green and then yellow skin and press on your remote control. Black Hole Addons Manager> Addons Download Manager> Black Hole E2 Skins Image section can come in different skin.
    
    EleganceHD_P_BH1.7x_VU_V1 interface is loaded. Was chosen as the active interface.
    If you want link given below and radio fund bootlogo change by taking advantage of threads:
    
    Vu + Bootlogo replacement program, use, ready bootlogolar ...
    
    If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download the file picon the subject. Unzip the downloaded folder or folders, remove the / usr/share/enigma2 / picon folder if you have placed in the directory, or create a folder called picon into this folder will need to send the file permission after making 755.
    
    Eutelsat set Picon Turksat loaded.
    After you install the backup settings and add-ons get: VU + 'ta get backup Duo & Solo USB and NFI
    
    Hdd or usb device with the Main Menu BlackHole Full backup can backup.
    
    Turquoise Backup Panel are from.
    Menu> Add-ons> Turquoise panel> Backup / Restore> Full Backup HDD / USB (Vu Plus series)> Full Backup HDD
    Image for the customized according to the above description for the link I give Vu + Ultimo. Who want to download and install and inspect:
    
    isayuksel_backup_BH_1_7_3_ult
    
    After installation examine the bookmarked links to the following:
    
    Black Hole İmajda HDD & USB Mount Operations
    
    Blackhole (1.7.0 +) and use the Multiboot
    
    Vu +, this black hole with the Tuner Server Support
    
    Good luck.













    [Only registered and activated users can see links. ]

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. back up image for Vu+ Ultimo
    By sat gr in forum Images Vu+ Ultimo
    Replies: 20
    Last Post: 14-08-15, 02:09
  2. back up image Vu + Uno
    By korn in forum Images Vu + Uno
    Replies: 12
    Last Post: 25-03-15, 22:16
  3. back up image VU UNO
    By korn in forum Images Vu + Uno
    Replies: 18
    Last Post: 12-12-12, 18:59
  4. Back up Image for DM 800
    By korn in forum Images Dm800
    Replies: 28
    Last Post: 01-10-12, 09:15
  5. back up vu ultimo
    By sakis1234567 in forum Περί VU Enigma 2
    Replies: 4
    Last Post: 26-02-12, 09:54

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •