Results 1 to 6 of 6

Thread: ssl 82---> ssl 84

  1. #1

    ssl 82---> ssl 84

    Καλημερα σε ολους. ηθελα να ρωτησω ποια ειναι η διαδικασια για ενα dm800 sim.2.01 να περασει απο ssl 82 se ssl84. ευχαριστω.

  2. #2

    Απ: ssl 82---> ssl 84

    To use sim2 patched images with new ssl 84
    if the dreambox has old ssl 82 bootloader,flash new ssl-84 nfi first by internet explorer or dreamup then flash sim2 image
    if new ssl84 already flashed to dreambox just flash the sim2 image by usual method

    with the new ssl ,original drivers and most recent releases of plugins are working without modifications with exception of few plugins like webinterface and software manager may need to apply available specific patches.

    -for better benefit from new ssl better to use with original drivers 2-9-2011
    To take backup for the flash image with integrated new ssl we advice to use TSFlashBackup v 2.0
    To install and to make backup of barry allen multiboot image we advice to use sim2-barryallen v 2.0








    new ssl-84 is used as following

    To use new ssl with original images:
    -Flash new ssl-84 nfi to dreambox by internet explorer or dreamup(this used once if the current dreambox bootloader is ssl82 or older)
    -Flash original image as usual
    -Flash ssl-84 nfi to dreambox again and before rebooting the dreambox

  3. #3

    Απ: ssl 82---> ssl 84

    New sim2 ssl 84 for dm800

    Sim2 released new sim2 second stage bootloader for dm800hd within the plan of continuous support for all sim products
    The new sim2 ssl 84 enables users to use original images with genuine drivers without modification on all types of sim2 dm800 boxes
    Also sim2 annouced that the new sim2 ssl 84 supports both sim2 card types for dm800hd(sim201 and sim201) and this proved all what said about stopping support for sim201 cards are totally wrong.
    Although the new ssl gives complete solution for sim2 dm800hd but there are some minor issues not resolved yet such webinterface ,wlan and software managers,however these issue could be fixed easily with available patches.
    also expected problems will be with few images like edg nemesis and oozoon images and in this case sim2 advice users to use already patched images.

    How to use new sim2 ssl 84

    -Flashing original images.
    1- load sim2 ssl84 to dreambox in setup mode by dreamup or internet explorer method then reboot the dreambox to setup mode again to activate the new ssl
    2- Flash the original image by dreamup or internet explorer methods
    3- without rebooting the dreambox flash again the sim2 ssl84 immediatley
    4-reboot the dreambox .

    -Flashing already patched images with sim2 ssl84
    just flash the image with dreamup or internet explorer method without loading sim2 ssl84 whatever the current ssl version loaded to dreambox

    -Updating already flashed image with sim2 ssl84
    we do not advice to update images in normal cases but for accidental updating we advice installation of new sim2 ssl 84.ipk before restrating the dreambox after finihsing update process



    for multiboot backup and osd flash image backup better to use sim2barryallen 4 and TSFlashbackup 4 which will be available as soon as possible


    sim2 ssl 84 dm800hd should be used with the specified sim2 model,sim2 neither me are not responisble for any damage could occur from improper use.


    Αυτο μηπως ειναι πιο σωστο? δηλ στο δικο σου κομπος λεει πως πρωτα βαζεις το ssl -84 nfi και μετα το sim image, ενω σ αυτο λεει πως μονο οταν θελεις να βαλεις original image βαζεις το ssl-84 nfi ξεχωριστα. Στα patched images απλα το περναει απο πανω και το αναγνωριζει ο δεκτης

  4. #4

    Απ: ssl 82---> ssl 84

    Καλημερα σε ολους! καμμια ιδεα κανεις ποιο ειναι το σωστο?

  5. #5

    Απ: ssl 82---> ssl 84

    How to use new sim2.01 ssl 84/clone images

    1-if the dreambox has old ssl 82 bootloader,flash new ssl-84 nfi first by dreamup or internet explorer method then reboot the dreambox to setup mode again to activate the new ssl
    2-after flash clone patched ssl84 dm800 sim.2.01 image
    3-if new ssl84 already flashed to dreambox just flash the clone patched ssl84 dm800 sim.2.01 image by usual method
    4-reboot the dreambox .

  6. #6

    Απ: ssl 82---> ssl 84

    How to use new sim2.01 ssl 84/original images

    -Flashing original images.
    1- load sim2.01 ssl84 to dreambox in setup mode by dreamup or internet explorer method then reboot the dreambox to setup mode again to activate the new ssl
    2- Flash the original image by dreamup or internet explorer methods
    3- without rebooting the dreambox flash again the sim2 ssl84 immediatley
    4-reboot the dreambox .

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •