Power of Dreams HD+ 2.0.5 (POD HD+) CrossEPG Edition for Vuo+ Duo
29-07-2011
Changes:
- Fix pour le soucis de LCD Duo qui ne fonctionnais pas normalement
==> Power of Dreams HD+ 2.0.5 (POD HD+) CrossEPG Edition for Vu+ Duo
Bavaria the real Germany
I Love my Dreambox DM7020HD
Power of Dreams HD+ 2.0.5 (POD HD+) CrossEPG Edition for Vuo+Duo
24-08-2011
Changes:
Open Embedded
- Update blind scan (uno)
- Update ManualFanControl plugin (uno)
- Remove udev-static
- For details, please take a look at git log
Driver Update 20110715 (uno)
- Lower the default FAN rpm
- Increase dynamic range of FAN speed
20110817
- Change key code of audio button (uno)
- Change remote control response code (remote control of uno works only in uno)
- Fix occasional not moving FAN problem (uno)
- Remove udev-static
Power of Dreams HD+ 2.0.5 (POD HD+) CrossEPG Edition for Vuo+Duo
27-08-2011
ATTENTION : modification de la gestion des images complètes
Avant : l'image POD complète ne changait pas lors des mises à jours, et pour installer un démo avec une POD à jour, il falait charger une image un peu ancienne et faire la mise à jour
Désormais : l'image complète POD est mise à jour elle aussi :
- pour installer une POD complète : prendre l'image en début de thread, vous êtes a jours
- si vous avec déjà une POD de la bonne génération installée, ca ne change pas, il suffit de mettre à jour (Menu - Paramétrer - Gestionnaire logiciel - Mise à jour logiciel)
Power of Dreams HD+ 2.0.5 (POD HD+) CrossEPG Edition for Vuo+Duo
13-10-2011
Changes:
Update the image at the official image 6.0
Open Embedded
- Add WebBrowser plugin(Duo needs a bootloader update)
- Add UI postion control plugin
- Add 3D framebuffer control plugin
- Add remote control system code control plugin
- For details, please take a loot at git log.
Driver update
20111006
- improve DVB-C/T tuning(uno)
- Fix incorrect display of DVB-C/T SNR/AGC(uno)
- Fix high-bitrate problem in CI(uno, needs a FPGA update, New Rev 4.2 FPGA image is at http://archive.vuplus.com/download/fpga/vuuno/4.2/)
- Support 3D framebuffer
- Add interface for UI position setup
- Add redundant fpga device at /dev (uno)
- Add ioctl for hdmi_cec(get physical/logical addr.)
- Fix audo mute in pass-through(uno)
- Add interface to set the system code of the remote control(uno)
- Add interface to disable REC VFD icon(uno,duo)
- Add interface to control global alpha
WARNING: user POD HD with DUO
From the next version of the POD HD, you MUST use a new bootloader. To do this:
- Download the bootloader:
- Unzip attached file
- Format USB flash drive in with fat
- Create directory /vuplus/duo at flash drive
- Copy file to directoy /vuplus/duo at flash drive
- Shutdown VU+ STB
- Disconnect all USB devices
- Connect USB flash drive to VU+ STB
- Power on VU+ STB
- Wait for message "Please remove USB" at VFD
- Disconnect USB flash drive
- Power off VU+ STB
- Flash new image
- Attention: clear out the file / vuplus / duo / cfe_cfe_auto.bin of the key with a successful update
Note 1: This operation does not update the bootloader, not the image you to update online or with a normal flash
Note 2: this is only for the duo, not solo or unos
Power of Dreams HD+ 2.0.5 (POD HD+) CrossEPG Edition for Vuo+Duo
14/10/2011
We are pleased to offer for POD HD + Vuplus Duo, Solo Uno and now in version 2.0.6.
- Based on the generation '6 'official images
- Requires an update of the bootloader on Duo
Main new feature:
- Added a web browser plugin (except solo)
- Added a plugin for precise placement of the UI to fit your HDTV (overscan ... Wink
- Added a plugin for managing 3D menus
20111006
- Improve DVB-C / T tuning (uno)
- Fix incorrect display of DVB-C / T SNR / AGC (uno)
- Fix problem in high-bitrate CI (uno, needs a FPGA update, New Rev 4.2 FPGA image iz at http://archive.vuplus.com/download/fpga/vuuno/4.2/)
- Support 3D framebuffer
- Add UI interface for setup position
- Add redundant FPGA device at / dev (uno)
- Add ioctl for hdmi_cec (get physical / logical addr.)
- Fix mute Audo in pass-through (uno)
- Add interface to set the system code of the remote control (uno)
- Add interface to disable REC icon VFD (uno, duo)
- Add interface to control the overall alpha
Please note, the transition from 2.0.5 to 2.0.6 can be done by re-flashing your set top box, no updates online possible.
WARNING: user POD HD with DUO
From the next version of the POD HD, you MUST use a new bootloader. To do this:
- Download the bootloader: http://archive.vuplus.com/image/2011...fe_3_0_usb.zip
- Unzip the contents of the key to obtain the following chemain: / vuplus / duo / cfe_cfe_auto.bin
- Turn off the duo
- Put the stick in the duo's post
- Turn the duo
- The update is very fast and as "Finished .. reboot" appears, you can remove the key and restart the duo
- Attention: clear out the file / vuplus / duo / cfe_cfe_auto.bin of the key with a successful update
Note 1: This operation does not update the bootloader, not the image you to update online or with a normal flash
Note 2: this is only for the duo, not solo or unos
Power of Dreams HD+ 2.0.6 (POD HD+) Vuo+Duo
HTML Code:04-02-2012 [PHP]Changes: - Update Hypercam 2.18: support for HD channels on some maps csat. - This update is probably the last of the series based on Linux 2.6.18, the POD HD based on 3.1.x comming soon.[COLOR="#0000FF"][/COLOR][/PHP][COLOR="#0000FF"][/COLOR]:cool.e.n.g.u.i.ns.a.l.u.tHTML Code:http://hotfile.com/dl/145173610/44f0b84/vuplus-duo-pod-hdplus-206.zip.html
We are pleased to offer new POD HD + Vuo+ Duo and now in new version 2.2
DOWNLOADWe are pleased to offer new POD HD + Vuo+ Duo and now in new version 2.2
05-02-2012
Changes:
- Based on the official Image 7.0 (Linux 3.1.1)
- Availability all plugins of e2openplugins, dont l"interface web openwebif qui remplace celle issue de Dream.
There are currently 1 users browsing this thread. (0 members and 1 guests)