Page 1 of 2 12 LastLast
Results 1 to 10 of 19
  1. #1

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    28,958
    Rep Power
    24776

    back up image VU UNO

    Pli image 2.1 backup @isayuksel vu plus uno



    Pli image 2.1 (02/09/2011) backup files are examples of privatization, and Uno

    First, a new image for the latest version of usb Tuck Official Web Site 'from the downloading and installing cihazımıza: Vu + USB Uno how image will be scored? (Contacts)

    Needs to be done after the installation, after installation, settings:: (2) Vu + Duo first setup settings


    Quote:



    Seçilidi HDMI.
    1080i is selected.
    Turkish language was chosen.


    Can I search for channels or channel list at this point we can install ready.

    To search for detailed information about the channel: (4) Vu + Duo-channel search and bookmark create

    Webinterface to install any plug-in need to set the Channel List. For this

    Menu => Add-ons section of the press to come Kumandamızın Green (Add-on Download) is pressed. Downloading plug-in information ... Please wait ... The system may display a message in the form of plugins into categories will be listed after their stay. When you press the OK button on your remote control by pointing to the categories of any plug-ins will be listed in that category. Here you find the add-on extensions, while under the category webinterface_old kumandamızın We press the OK button.

    To be effective, re-launching the plug-in cihazımızı.

    We check our config for the network.

    Menu> Setup> System> Network section of the "Network hardware settings," pointing to the kumandamızın "OK" button is pressed.

    Under the section for the current settings to take note of the IP address. (Channel settings will need to install the editor not to enter the value of the rope.)

    If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network settings and the test is

    Now we can install Settingimizi Channel: 4 Channel List to take with a different method (book).

    Quote:



    VU + Setting (Ready-Channel Lists) Kayacan * loaded in the current setting. (4 Satellite-09.02.2011)

    Be sure to reboot after installing the device to the channel settings.

    Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.

    Quote:



    Tuner A: (simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °

    Note: Notice that the first channel after you install the tuner ayarlamızı have made our list. Thus, due to the possible setting names of different satellites, the satellite broadcasts, we have prevented errors that can be taken.

    Quote:



    Menu> Setup> System> Audio / Video settings section to come
    4:3 content is as follows: Just Scale
    > 16:9 content is as follows: Just Scale
    changed. Green Key (OK) were recorded with the changes.

    Quote:



    Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
    set as the startup service: Channel D

    Menu => Add-ons section of the press to come Kumandamızın Green (Add-on Download) is pressed. Downloading plug-in information ... Please wait ... The system may display a message in the form of plugins into categories will be listed after their stay. When you press the OK button on your remote control by pointing to the categories of any plug-ins will be listed in that category.

    Quote:



    Add-on manager;
    Autoresolution systemplugins under the category,
    commoninterfaceassignment systemplugins under the category,
    under systemplugins Setpasswd (The password is assigned),
    videoenchancement systemplugins under the category,
    bitrateviewer under category extensions,
    cccaminfo under category extensions
    under category extensions dmconcinnty-hd-hardymod
    mediacenter under category extensions,
    permanentcloc under category extensions (not active)
    under category extensions Sherlock (help, press),
    showclock under category extensions (help, press),
    simplerss under category extensions (supply address has been entered),
    subtitleplayer under category extensions (3.05),
    virtualzap under category extensions (arrow key, press and hold)
    vlcplayer under category extensions
    weatherplugin under category extensions
    webmedia under category extensions
    youtubeplayer under category extensions
    2.2.1 under softcams ccam
    dmconcinnty-hd-mod4in1 was founded under the category of skins.

    Also;
    apletrailer under the category of extensions to build it.

    When you want to set up as external plugins. Ipk file / files via ftp / tmp directory after a workout telnette give the following command:
    Code:

    opkg install / tmp / *. ipk

    Restart your device after installation of the plugin.

    Quote:



    enigma2-plugin-extensions-dreamexplorer_7.2_mipsel.ipk was downloaded.

    Quote:



    EPG was founded Turkish Character Correction plugin. (V3.0) @ exenonline

    Quote:



    enigma2-plugin-glasssysutil_3.77_mipsel.ipk was downloaded.

    Quote:



    tunisiasat manager_3.0 download-addons-founded.

    Quote:



    Menu => Accessories => tunisiasat manager_3.0 e-addons-come first livefootball (3.2 b), then the plugins tunisiasat "Netradioturk_2.6-b" was


    Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and installation are doing.
    To set up Hacksat telnette
    Code:

    Export MALLOC_CHECK_ = 0
    opkg install-force-overwrite / tmp / Hacksat *

    give the command.
    Our device came after restarting the plugin by running the plug-ins are making k.ey update.


    CCcam.cfg file / etc folder is located under. Server uses this knowledge to the file server need not to enter.

    Server to enter a look at the following post:

    CCcam.cfg enter a file server

    I gave the following link if you want to change the threads by taking advantage of funding and radio bootlogo:

    Vu + bootlogo replacement program and the use of ...

    If you want to install picon file. Türksat_Hotbird_Astra19_Eutelsatw3 picon file download, ndirdiğiniz zipten remove the folder / usr/share/enigma2 / directory should be submitted under. There is no Backupta.

    Prepared for the backup link in accordance with the above description giving Vu + Uno. Who want to download and install and review:















    [Only registered and activated users can see links. ]

  2. #2
    Ευχαριστούμε μπορούμε να το βάλουμε εκτός flash ?
    παράδειγμα σε usb

  3. #3

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    28,958
    Rep Power
    24776
    Γιατί να μην μπορείς να το βάλεις ??

  4. #4
    Πως κάνουμε multiboot όπως στους dreambox
    με barry allen ?
    Αν μπορείς να βοηθήσεις είμαι νέος στο VU+UNO
    Έψαξα στο φόρουμ μα δε κατόρθωσα να βρω κάτι

  5. #5

    georgeflu's Avatar
    Join Date
    Jan 2011
    Location
    ptolemaida
    Age
    37
    Posts
    9,228
    Rep Power
    27445
    παλικαρια,το meoboot σιγουρα δεν δουλευει στον δεκτη (σε καποια σαιτ λενε οτι καποια στιγμη ο meo θα το προσαρμοσει και γι αυτον),το Β.Α δεν το εχω σιγουρο,αλλα οσο κι αν το παλεψα δεν καταφερα να το κανω να δουλεψει (εξαφανιζεται απο τον δεκτη μολις τον κανω reboot). φυσικα,οποιος θελει προσπαθει και περιμενουμε και οι υπολοιποι,αν προκυψει με καποιον τροπο κατι θετικο!
    ολα ειναι FLU

    Member SatDreamGr Projects

  6. #6

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    28,958
    Rep Power
    24776
    Black Hole Vu+ Uno 1.6.5 -3D




    nStreamPlayer

    keymap.xml usr/share/enigma2

    CCCam2.2.1
    MGCamd 1.37a










    DOWNLOAD USB




    [Only registered and activated users can see links. ]

  7. #7

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    28,958
    Rep Power
    24776
    UK ready BlackHole 1.6.5VU+ Uno backup


    hats New ?

    There are no backup scripts available yet to make USB or NFI versions, so you must flash the original BlackHole 1.6.5 image, setup mountpoint for your usb device then use the BlackHole Personal Backup.

    Menu > BlackHole Personal Backup > Setup > Map Path For USB > Green/Restore > Red/Continue.

    This Personal Backup is UK ready with Oscam and CCcam editted for updating entitlements
    New Drivers added vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20111006
    FPGA Upgraded
    CCcam 2.1.3
    Oscam 5965
    CCcam Providers update to 07.10.2011
    CCcam Channel Info update to 07.10.2011
    Oscam.srvid update to 04.10.11
    Livefootball 3.3
    Flashexpander ( needs setup for your device )
    Catseye E2 Settings File 75 East-58 West 02.10.2011
    Shoutcast
    TSpanel 3.6


    PASSWORD:
    vuplus









    [Only registered and activated users can see links. ]

  8. #8

    Απ: back up image VU UNO

    Turkuaz Team Mod BlackHole 1.7.2 Vu+ Uno
    HTML Code:
    Turkuaz Team Mod BlackHole 1.7.2 Vu+ Uno
    
    Installation and initial settings: we do:
    
    First of all, the latest version of the new image to usb cihazımıza install all USB Uno Vu + how the image will be scored? (Contacts)
    
    Settings: after installation to be done after installation: (2) initial installation settings Vu + Duo
    
    Quote:
    
    Seηilidi HDMI.
    1080i was chosen.
    Language Turkish is selected.
    DHCP on the network.
    
    At this point you can call the channel list or channel can install ready. If you want to make the tuner settings before you have to do a channel scan.
    
    For more information about how to channel call: (4) Create the favorite channel search and Vu + Duo
    
    Network settings: in-house.
    
    Menu> Setup> System> Network section of the "Network hardware settings" to come on the kumandamızın "OK" button pressed.
    
    Under the section for the current settings to take note of the IP address. (Value not to enter this ip will need to install the channel setting.)
    
    If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure
    
    Now you can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).
    
    Quote:
    
    TurkuazPanel Backupda Channel List from the installed.
    
    Quote:
    
    VU + Plus the current channel setting on the HDTV Channel Setting is loaded.
    (January 10, 2012 4 Satellite: Turksat, Hotbird, Astra EutelsatW3 and 19.2)
    @ Galaxy2002
    
    Be sure to reboot after installing the device to the channel setting.
    
    Menu> Setup> Satellite Configuration> Settings section to come Tuner Tuner configuration.
    
    Quote:
    
    Tuner A: (Basic) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    
    Note: Notice that after installing before the tuner ayarlamızı made our list of channels. Thus, because of the possible names of different satellites, satellite broadcasts that can be taken in setting we have prevented errors.
    
    Extension (plugin) We install:
    
    Menu => Add-ons section to come Kumandamızın Red button (Add-ons) are pressed. Updating the software catalog for a while after their stay at the screen a message that says the system will be a list of plugins into categories. Any point to a category add-ons in that category will be listed when you press the OK button on your remote control. Dimmer can be installed here ekelentilerdir olanalar installed. You want to install (or you want to remove), add-ons by checking the set up here (or remove).
    
    Quote:
    
    Extension manager;
    PermanentClock under the System category,
    Setpasswd under the System category (The password is assigned),
    StartUpService under the System category (Channel D),
    VLCPlayer under the Software category,
    SimpleRSS under the category of Multi-media (not active),
    VirtualZap under the category of Multi-media (press and hold an arrow key),
    Plugin Weatheer established under the Multi-media category.
    
    Install (or uninstall) you want to restart after the operation istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button on the devices, reboot, while providing Kumandamızın.
    
    In line with other simple settings: do we want:
    
    Quote:
    
    Menu> Setup> System> Audio / Video settings
    Go to the content of 4:3 as follows: Just Scale
    > 16:9 content is as follows: Just after the green key to making Scale (OK) acknowledge.
    Menu> Setup> System> Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
    After setting up the Green Key (OK) and acknowledge.
    Menu> Setup> System> Customize section, change the user experience as a specialist in Green Key (OK) and acknowledge.
    
    Initial determination of channel:
    
    Quote:
    
    While the point of the channel you want to begin startup the Channel List.
    
    Press the Menu key.
    
    Service options in the drop-down set point as stratup press the OK button on your remote control.
    
    Channel you want your device will restart.
    
    This means the latest on what channel you want to cancel operations kapattıysanız want to open that channel;
    
    While the Channel List, press the Menu key.
    
    Open the options and press OK on your remote control point to reset the startup service option.
    
    Quote:
    
    
    set as the startup service: Channel D
    
    Panel Addons Manager can install some plugins are not GH Extension Manager. For this purpose;
    
    Press the green and yellow, respectively Kumandamızın BH Addons Manager panel and select a row to come. While here kumandamızın Addons Download Manager by pressing OK on the pop-up in Chapter Black Hole Image Plugins can be loaded by pressing the OK button on the plug-ins arrive kumandamızın. While this too, we want to install add-on and then we press the OK button kumandamızın. Plugin will display information about where the short explanations. Here, the green button (Download) to whether we want to do with the download and installation information about the problem buşlunduğu kumandamızın by pressing OK on the setup screen, yes, done.
    
    
    Quote:
    
    DreamExplorer 7.3, Enhanced Movie Center v3.0.0, v5.0 Sherlock WebMedia was 5.0.
    
    You can set up as described above, Apple Trailer v1.0 addons Mangere. This extension has not been Backupta. Must have on your hdd for this extension to work. Hdd during installation are also folders. Caused by addons with this panel or the / tmp directory needs to be established.
    
    Want to install external plugins. Ipk file via ftp / tmp directory of the remote, first green, then yellow after laying the drop-down menu, press the "Manual Install Ipk packges" remotes come on "OK" button. Will want to install the ipk file. Kumandamızın was selected even though the "OK" button you can install.
    
    Quote:
    
    Turkuazpanel_0.5_mipsel.ipk established.
    
    Quote:
    
    Nstreamplayer was 0.3 plugin.
    
    Quote:
    
    enigma2-plugin-founded systemplugins-bouquetsprotection_0.1_all.ipk
    
    Quote:
    
    ShowClock established. Press and hold the exit button.
    
    Quote:
    
    BitrateWiewer established.
    
    Quote:
    
    file was edited on nStreamPlayer. @ Dursundursun
    
    Quote:
    
    subtitleplayer_3.11 established.
    
    Quote:
    
    r0_beta2 buyukbangpanel_1.1-founded.
    
    Quote:
    
    manager_3.0 download tunisiasat-addons-founded.
    
    After you restart the device on;
    
    Quote:
    
    Menu => Plugins => tunisiasat-addons-come first livefootball manager_3.0 e (3.4b), and then the plugins tunisiasat "Netradioturk_2.6-b" + "Netraditurk satation 2.7", and finally under the CCcam Info plugin V1. 3c was
    
    Emu are doing the installation:
    
    As E2_CCcam_2.3.0_bh.tgz file download / tmp folder, delivered below. Black Hole in the Addons Manager (kumandamızın to come to this section, we press the green and yellow button) Manual Install Bh kumandamızın packges point we press the OK button. While on our file and press OK to re-kumandamızın uşuna press OK on the setup menu that are doing well, yes.
    
    CCcam.cfg file / etc folder is located under. Server uses the knowledge of this must go to the file server.
    
    Entering information in the file server Cccam.cfg
    
    As E2_Mgcamd_138_bh.tgz file download / tmp folder, delivered below. Black Hole in the Addons Manager (kumandamızın to come to this section, we press the green and yellow button) Manual Install Bh kumandamızın packges point we press the OK button. While on our file and press OK to re-kumandamızın uşuna press OK on the setup menu that are doing well, yes.
    
    As Mgcamd_1.37_E2_bh.tgz file download / tmp folder, delivered below. Black Hole in the Addons Manager (kumandamızın to come to this section, we press the green and yellow button) Manual Install Bh kumandamızın packges point we press the OK button. While on our file and press OK to re-kumandamızın uşuna press OK on the setup menu that are doing well, yes.
    
    K ey installer do the establishment and key updating procedures:
    
    hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;
    
    Code:
    export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / hacksat *
    We give the command.
    If the installation fails again, try to give the following command:
    
    Code:
    ipkg update
    After installation, update k ey are doing.
    
    And other settings: kurulumlarımızı do.
    
    If you want to install the first green and then yellow skin and press on your remote control. Black Hole Addons Manager> Addons Download Manager> Black Hole E2 Skins Image section can come in different skin.
    
    Quote:
    
    EleganceHD_P_BH1.7x_VU_V1 interface is loaded. Was chosen as the active interface.
    
    If you want link given below and radio fund bootlogo change by taking advantage of threads:
    
    Vu + Bootlogo replacement program, use, ready bootlogolar ...
    
    Quote:
    
    Değişrtirildi Bootlogo and radio fund ...
    
    
    If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download the file picon the subject. Unzip the downloaded folder or folders, remove the / usr/share/enigma2 / picon folder if you have placed in the directory, or create a folder called picon into this folder will need to send the file permission after making 755.
    
    Quote:
    
    Eutelsat set Picon Turksat loaded.
    
    After you install the backup settings and add-ons get: VU + 'ta get backup Duo & Solo USB and NFI
    
    Hdd or usb device with the Main Menu BlackHole Full backup can backup.
    
    Quote:
    
    Turquoise Backup Panel are from.
    Menu> Add-ons> Turquoise panel> Backup / Restore> Full Backup HDD / USB (Vu Plus series)> Full Backup HDD
    
    
    Image link in accordance with the above description I give customized for Vu + Uno. Who want to download and install and inspect:
    
    
    
    After installation examine the bookmarked links to the following:
    
    Black Hole İmajda HDD & USB Mount Operations
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]


  9. #9

    Απ: back up image VU UNO

    Turkuaz Team Mod AAF 04.02.2012 Vu+ Uno
    urkuaz Team Mod AAF 04.02.2012 Vu+ Uno

    Installation and initial settings: we do:

    First of all, the latest version of the new image to usb cihazımıza install all USB Uno Vu + how the image will be scored? (Contacts)

    Settings: after installation to be done after installation: (2) initial installation settings Vu + Duo

    Quote:

    Seηilidi HDMI.
    1080i was chosen.
    Language Turkish is selected.
    DHCP on the network.

    At this point you can call the channel list or channel can install ready. If you want to make the tuner settings before you have to do a channel scan.

    For more information about how to channel call: (4) Create the favorite channel search and Vu + Duo

    Network settings: in-house.

    Menu> Setup> System> Network section of the "Network hardware settings" to come on the kumandamızın "OK" button pressed.

    Under the section for the current settings to take note of the IP address. (Value not to enter this ip will need to install the channel setting.)

    If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure

    For experiencing incompatibility with this version of the image Tόrksat AAF channel list before loading will remedy the problem by changing the interface. The interface described later external plugin installation (attached) by the method of installation is the same.

    Quote:

    pli-enigma2-skin-black-white-image_1.0_mipsel.ipk interface is loaded. Was chosen as the active interface.


    Now you can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).

    Quote:

    TurkuazPanel Backupda Channel List from the installed.

    Quote:

    VU + Plus the current channel setting on the HDTV Channel Setting is loaded.
    (January 10, 2012 4 Satellite: Turksat, Hotbird, Astra EutelsatW3 and 19.2)
    @ Galaxy2002

    Be sure to reboot after installing the device to the channel setting.

    Menu> Setup> Satellite Configuration> Settings section to come Tuner Tuner configuration.

    Quote:

    Tuner A: (Basic) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °

    Note: Notice that after installing before the tuner ayarlamızı made our list of channels. Thus, because of the possible names of different satellites, satellite broadcasts that can be taken in setting we have prevented errors.


    Quote:

    Menu> Setup> System> Audio / Video settings:
    Go to the content of 4:3 as follows: Just Scale
    > 16: p Go to the content as follows: Just Scale
    Green Key (OK) and recorded.

    Quote:

    Menu> Setup> System> Button Setup QuickEPG mode of appreciation against the bar as the plugin has been changed to extended.

    Extension (plugin) We install:

    Menu => Add-ons section to come Kumandamızın Green key (Download Plugin) are pressed. Extension information ... please wait ... The system may display a message in the form of plugins into categories will be listed after their stay. Any point to a category add-ons in that category will be listed when you press the OK button on your remote control.

    Quote:

    Downloadable add-ons => systemplugins under "setpasswd" (password is assigned),
    Downloadable add-ons => extensions "under the cccaminfo"
    Downloadable add-ons => extensions "under the dreamexplorer (7.4)",
    Downloadable add-ons => extensions "under the MyTube"
    Downloadable add-ons => extensions "under the openwebif"
    Downloadable add-ons => extensions "under the permanentclock"
    Downloadable add-ons => extensions under the "sherlock (5.1)",
    Downloadable add-ons => extensions "under the showclock"
    Downloadable add-ons => extensions "under the simplerss"
    Downloadable add-ons => extensions "under the subtitleplayer (3.11)"
    Downloadable add-ons => extensions "under the VLCPlayer"
    Downloadable add-ons => extensions "under the weatherplugin"
    Downloadable add-ons => extensions "under the webmedia (5.0)",
    Downloadable add-ons => softcams, under the "CCcam 2.3.0"
    Downloadable add-ons => under softcams, "mgcamd 1.38" was established.

    Quote:

    Menu => Setup => System => Extended SYSTEMTIME Setting> Time zone: (GMT +02:00) Athens, Istanbul, Minsk
    set as the startup service: Channel D

    Want to install external plugins. Ipk file via ftp / tmp directory, throw, then give the following command, and finally to the device, simply restart telnet.
    Code:
    ipkg install / tmp / *. ipk
    Quote:

    Important note: Yıkarıdaki shape and you can copy and paste command is doing. In addition, there is no need to type the name of the plugin in. "*. Ipk" refers to all the ipk files with the extension. Tmp folder, the file name without the file extension Dolaysısyla which allows you to install the ipk.

    Quote:

    Turkuazpanel_0.5_mipsel.ipk established.

    Quote:

    Nstreamplayer was 0.3 plugin.

    Downloadable add-ons => extensions "under the enchancedmoviecenter (3.0)",


    Quote:

    enigma2-plugin-founded systemplugins-bouquetsprotection_0.1_all.ipk

    Quote:

    BitrateWiewer established.

    Quote:

    VirtulaZap established. Long-term press the OK button.

    Quote:

    Buyukbang panel v.1.1 beta 2 is established. (@ Exenonline)

    Quote:

    file was edited on nStreamPlayer. @ Dursundursun

    Quote:

    manager_3.0 download tunisiasat-addons-founded.

    After you restart the device on;

    Quote:

    Menu => Plugins => tunisiasat-addons-manager_3.0 e-sport came under the first olarakPlugins livefootball (3.4b) under the Plugins-multimedia "Netradioturk_2.6-b" is founded

    Enigma2 plugin extensions are not included in Backupda appletrailer as described above, I recommend to build 0.1 mipsel.ipk plugin download. Must have on your hdd for this extension to work. Hdd during installation are also folders. This is caused by ftp with the / tmp directory after sending telnette ipkg install / tmp / *. Ipk should be established by executing the command.

    Emu are doing the installation:

    Emu downloadable add-ons were setup.

    Cccam.cfg file / usr / k e ys are. Here you can edit the server by entering your information.

    Glass was selected as the active CCcam 2.3.0 Backupda.

    K ey installer do the establishment and key updating procedures:

    hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;

    Code:
    export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / hacksat *
    We give the command.
    If the installation fails again, try to give the following command:

    Code:
    ipkg update
    After installation, update k ey are doing.

    And other settings: kurulumlarımızı do.

    If you wish to install downloadable add-ons, plug-in interface or external interface as described in the installation, you can setup.

    Quote:

    pli-enigma2-skin-black-white-image_1.0_mipsel.ipk interface is loaded. Was chosen as the active interface.

    If you want link given below and radio fund bootlogo change by taking advantage of threads:

    Vu + Bootlogo replacement program, use, ready bootlogolar ...

    Quote:

    Değişrtirildi Bootlogo and radio fund ...


    If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download the file picon the subject. Unzip the downloaded folder or folders, remove the / usr/share/enigma2 / picon folder if you have placed in the directory, or create a folder called picon into this folder will need to send the file permission after making 755.

    Quote:

    Picon Turksat set is loaded.

    After you install the backup settings and add-ons get:

    VU + 'ta get backup Duo & Solo USB and NFI

    Quote:

    Turquoise Backup Panel are from.
    Menu> Add-ons> Turquoise panel> Backup / Restore> Full Backup HDD / USB (Vu Plus series)> Full Backup HDD

    Image link in accordance with the above description I give customized for Vu + Uno. Who want to download and install and inspect:

    Good luck ...

    Enjoy .

    [Only registered and activated users can see links. ]

  10. #10

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    28,958
    Rep Power
    24776

    Απ: back up image VU UNO

    Code:
    there are 4 satellite setting Backupta dated March 3, 2012.
    TÜRKSAT
      HOTBIRD
      EutelsatW3 + (Eurobir9)
      ASTRA19
      .
      Turksat and EutelsatW3 piconları Backupta installed.
      .
      Setting Türksat eklenmiştir.Ayarları bouquet made ​​of EPG.
      In addition, the excellent work eklenmiştir.Pli BüyükBankPanel ins.
      .
      EMU: CCcam-2.3.0 and 1:38 Mgcamd-established.
      .
    Additives to yüklenmiştir.Bilgi Required for all plugins, look at the pictures.
      .
      Color keys assigned the following tasks.
    RED: Rekord Infobar
    LONG RED: Unassigned
    GREEN: Browser Plugin (Extensions)
    LONG GREEN: Unassigned
    Yellow: Switch4: 3/16: 9
    UZUNSARI: Infobar AudioSelection
    BLUE: Media Player / DVD Player / Picture Player / PiP
    LONG BLUE: Unassigned
      .
    Skin: HD Glass made ​​16 V4.27 Kullanılmıştır.Tüm settings.
    
    
    New! Click the words above to view alternate translations. Dismiss
    Google Translate for Business:Translator Toolkit
    Website Translator
    Global Market Finder
    Turn off instant translation
    About Google TranslateMobilePrivacyHelpSend feedback



    [Only registered and activated users can see links. ]

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. back up image Vu + Uno
    By korn in forum Images Vu + Uno
    Replies: 12
    Last Post: 25-03-15, 22:16
  2. back up image OE 2.0 for DM800
    By korn in forum Images Dm800
    Replies: 6
    Last Post: 24-03-14, 10:02
  3. back up image OE 2.0 for DM8000
    By korn in forum Images DM8000 PVR
    Replies: 11
    Last Post: 12-03-14, 22:03
  4. Back up image for DM8000
    By korn in forum Images Dm8000
    Replies: 21
    Last Post: 14-05-13, 14:25
  5. Back up Image for DM 800
    By korn in forum Images Dm800
    Replies: 28
    Last Post: 01-10-12, 09:15

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •