Results 1 to 6 of 6

Thread: Enigma Signal Meter 2 - for all the boxes E1 and E2

  1. #1

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,784
    Rep Power
    2484984

    Enigma Signal Meter 2 - for all the boxes E1 and E2

    Enigma Signal Meter 2 - for all the boxes E1 and E2



    For best results when the actual results:

    - Do not search when your box zap on HD channels
    - Do not search for a receiver while recording
    - Do not search until you open the web browser (web interface)
    - Do not search for while you are on the receiver to run some plugins
    - In general, avoid anything what can slow box

    Tested to DreamBox 800HD DreamBox 500s

    The ideal program for installers who do not need to carry a receiver and a TV to place where you install your sat dish



  2. #2

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,784
    Rep Power
    2484984
    Enigma Signal Meter 2




    - Windows XP SP 2 or newer
    - .NET framework 3.5
    - 1MB free space on disc

    for now tested and working:
    - DM500
    - DM500HD
    - DM600
    - DM7000
    - DM7025
    - DM800
    - DM800SE
    - DM8000
    - VU+ Uno
    - VU+ Duo
    - AzBox Premium
    - AzBox HD Elite
    - AzBox Ultra HD
    - Kathrein UFS 910
    - IPBox 9000
    - Amiko Alien
    - Topfield TF 7700HD PVR


  3. #3

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,784
    Rep Power
    2484984
    new version 0.0.5


    tested and working

    - DM500
    - DM500HD
    - DM600
    - DM7000
    - DM7020
    - DM7025
    - DM800
    - DM800SE
    - DM8000
    - VU+ Uno
    - VU+ Duo
    - AzBox Premium
    - AzBox HD Elite
    - AzBox Ultra HD
    - Kathrein UFS 910
    - IPBox 9000
    - Amiko Alien
    - Topfield TF 7700HD PVR
    - Gigablue solo
    - ClarkeTech ET9000


  4. #4

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,784
    Rep Power
    2484984
    Enigma Signal Meter v0.006



    Small and simple Windows application for fine tuning your satellite dish with Enigma 1 and 2 based satellite reciever. You’ll need to have computer running Windows 98 or higher with network connection to your box (internet, wifi..) web interface started on your Enigma 1 or 2 based satellite reciever and box NOT IN STANDBY. Simply enter username, password (if needed) and IP address for your box and you’re done. Due to limitation of it’s web interface you cannot choose transponder to tune in on Enigma 2 based boxes, also signal reading is somewhat slower on Enigma 2.

    Requirements:
    Windows 98 or higher
    .NET framework 3.5 installed
    1,5 MB free space

    Features:
    - display signal strength (db,SNR,AGC, BER)
    - display current channel
    - VOICE reading of signal levels
    - sound warning when “LOCK” found/lost

    New version changes:
    - VU+ duo bug fix, e2snrdb is the same as e2snr field




  5. #5

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,784
    Rep Power
    2484984
    Enigma Signal Meter – Krkadoni Edition



    First release of Enigma Signal Meter was quite popular, but it was buggy, lacked support for many different Enigma 1 and Enigma 2 flavors, had no support for multitasking, had confusing and different interface for E1 & E2 receivers. That’s why new Enigma Signal Meter – Krkadoni Edition was born.

    Description

    Fast, small, portable, simple and free application for Enigma 1 / Enigma 2 satellite receivers, build to help you align you satellite dish to perfection.

    Features:

    SUPPORTS ALL currently existing Enigma1 and Enigma2 receivers and images
    same simple interface used for Enigma1 and Enigma2 boxes (originally they are quite different)
    full background processing (running tasks will not hang application)
    small & portable (doesn’t require installation and can be run from USB stick)
    autoupdate (offers to update when new version is available)
    voice reading of signal levels (uses default Windows voice)
    signal beeping (beeps signal with frequency depending on signal level)
    works remotely (just forward web port and you can connect from anywhere)

    Requirements:

    Enigma 1 or Enigma 2 based satellite receivers with running Web interface (WebIf)
    Network connection between receiver and computer
    Windows XP or higher
    .NET Framework 3.5
    1 MB of free disk space

    List of receivers it was tested and working on:

    - DM500
    - DM500HD
    - DM600
    - DM7000
    - DM7020
    - DM7025
    - DM800
    - DM800SE
    - DM8000
    - VU+ Uno
    - VU+ Duo
    - AzBox Premium
    - AzBox HD Elite
    - AzBox Ultra HD
    - Kathrein UFS 910
    - IPBox 9000
    - Amiko Alien
    - Topfield TF 7700HD PVR
    - Gigablue solo
    - ClarkeTech ET9000

    Thanks to all people on Satelitski forum who tested

    For best results when searching (faster response time):
    - don’t search while zapped on HD channels
    - don’t search while recording
    - don’t search while receiver’s web interface is open in web browser
    - don’t search if you have other plugins running
    - generally avoid anything that slows down your receiver




  6. #6
    underconstruction's Avatar
    Join Date
    Jun 2011
    Location
    Germany *** Bavaria***
    Posts
    577
    Rep Power
    144
    Enigma Signal Meter – Krkadoni Edition v.0.0.8


    Changes in version 0.0.8
    - fixed connecting to ports other than 80



    Download ==>
    Enigma Signal Meter – Krkadoni Edition v.0.0.8
    Bavaria the real Germany
    I Love my Dreambox DM7020HD

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Enigma signal meter android
    By korn in forum Κινητά Τηλέφωνα (Cell Phones)
    Replies: 5
    Last Post: 23-05-16, 22:53
  2. DREAMBOX SIGNAL METER for android
    By korn in forum Κινητά Τηλέφωνα (Cell Phones)
    Replies: 0
    Last Post: 28-12-15, 11:48
  3. ΠΩΛΕΙΤΑΙ ΠΕΔΙΟΜΕΤΡΟ HD SMART meter S20
    By kyros1 in forum Μικρές αγγελίες
    Replies: 3
    Last Post: 23-07-14, 22:52
  4. VU uno και signal σε db
    By azxc in forum Περί VU Enigma 2
    Replies: 0
    Last Post: 30-01-12, 23:49
  5. Enigma Signal Meter – Krkadoni Edition (e1+e2)
    By djdiageo in forum Plugins AZBox
    Replies: 0
    Last Post: 16-09-11, 12:01

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •