Wy isn't the driver for the kernel/drivers/net/usb/ax88179_178a.ko not included in the firmware on satdreamgr5 image ? the stable version has this driver.
Wy isn't the driver for the kernel/drivers/net/usb/ax88179_178a.ko not included in the firmware on satdreamgr5 image ? the stable version has this driver.
Groetjes Cobus R
VU+UNO 4K DVB-C FBC SatdreamGR / Openpli
Xtrend ET10000 OpenPli /SatdreamGR DVB C & 1x DVB T(2)
FTA Ziggo
Enabled, use online update and check if feeds contain the kernel module now.
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Thanks
i wil wait when the new one comes out i only have that network attached.
Groetjes Cobus R
VU+UNO 4K DVB-C FBC SatdreamGR / Openpli
Xtrend ET10000 OpenPli /SatdreamGR DVB C & 1x DVB T(2)
FTA Ziggo
Works great Thanks mate.
Groetjes Cobus R
VU+UNO 4K DVB-C FBC SatdreamGR / Openpli
Xtrend ET10000 OpenPli /SatdreamGR DVB C & 1x DVB T(2)
FTA Ziggo
I dont get LCD4linux working with sdg 5 on pli and stable it works great i used the the same config file.
I have the Samsung spf-75H
Groetjes Cobus R
VU+UNO 4K DVB-C FBC SatdreamGR / Openpli
Xtrend ET10000 OpenPli /SatdreamGR DVB C & 1x DVB T(2)
FTA Ziggo
Is there any error?
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
No error it just don't work. No picture on the screen.
Groetjes Cobus R
VU+UNO 4K DVB-C FBC SatdreamGR / Openpli
Xtrend ET10000 OpenPli /SatdreamGR DVB C & 1x DVB T(2)
FTA Ziggo
Not sure if that will solve your problem, but give a try of the following:
Code:opkg update opkg install libusb-compat reboot
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Or better install the mips file from here: https://forums.openpli.org/topic/478...inux/?p=707407
and let us know if that works.
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
No it don't work i used the on pli forum
Groetjes Cobus R
VU+UNO 4K DVB-C FBC SatdreamGR / Openpli
Xtrend ET10000 OpenPli /SatdreamGR DVB C & 1x DVB T(2)
FTA Ziggo
There are currently 1 users browsing this thread. (0 members and 1 guests)