drivers dm800

[Dr.Dream]

21-08-2011

dreambox-dvb-modules: update dm800 hardware drivers

- added 3D framebuffer support (for side by side and top and bottom 3D services)
(no auto detection yet)

- fixed audio sync problems on playback to live transition

- bcm4505/06

experimentally added blindscan support (needs e2 changes)
experimentally added "Turbo FEC" support (needs e2 changes)
added constellation buffer read support
fixed problems when more than one 4505/4506 tuner is used in the same box
fixed standby problems
added possibility to use SCPC optimized search ranges


- alps-bsbe1-c01a

experimentally added blindscan support (needs e2 changes)
added constellation buffer read support
fixed locking problems (better performance)


- bcm4501:

added possibility to use SCPC optimized search ranges


- cxd1981: fixed tuner problems after bootup from deepstandby in DVB-C mode

- added Nagra rev. 1.1 CI support to dm8000

- small alsa signed / unsigned fix

[korn]

update dreambox hardware drivers 09-11-2011

dreambox-dvb-modules.bb: update dreambox hardware drivers

dm800/dm8000:

- fixed sometimes inoperable hdmi audio after code change to AAC/MP3

dm7020hd:

- fixed bcm4505 tuner detection problems on boot from deep standby

- fixed support for high bitrate transponders (no CI support yet)

all:

- dont allow to allocate a demux pid filter for fake pid 0x2000

- fixed inoperable AUDIO button on DM7020HD remote control (dip switch depending)

- optimized blindscan (ignore duplicate found TPs, low SR crash)

Downloads/Dreambox/Driners/Enigma2

[korn]

update dm800 hardware drivers
03-02-2012

03-02-2012

update dreambox hardware drivers

- cxd1981(hybrid DVB-C/-T) increased max. frequency to 900Mhz

- cxd1981(hybrid DVB-T) fixed ineffective 5V for active antennas after mode change

- bcm4505/6 improved receiption sensitivity (fixes problems with small dishes since blindscan support)

dm500hd,dm800se,dm7020hd: fixed audio volume boost on alsa playback

dm7020hd:

- fixed frequently "error code 0x18006" messages on bootup

Downloads/Dreambox/Driners/Enigma2

[korn]

update dm800 hardware drivers
09-02-2012

update hardware drivers

- fixed strange aliasing noise on PCM Playback with needed upsampling
- finally fixed hybrid DVB-C/-T Tuner 5V output for active antennas
- don't fallback to DVI when the HDMI EDID was not readable
(this fixes some HDMI audio/video problems)


dreambox-dvb-modules_2.6.18-7.4-dm800-20120209-r0_dm800.ipk
dreambox-dvb-modules-dev_2.6.18-7.4-dm800-20120209-r0_dm800.ipk
dreambox-dvb-modules-dbg_2.6.18-7.4-dm800-20120209-r0_dm800.ipk

Downloads/Dreambox/Driners/Enigma2

[korn]

update dm800 hardware drivers
13-02-2012

update hardware drivers

13.02.2012


update dreambox hardware drivers:

- reverted last HDMI changes.. (this fixes DVI problems)

dreambox-dvb-modules-dbg_2.6.18-7.4-dm800-20120213-r0_dm800.ipk




dreambox-dvb-modules-dev_2.6.18-7.4-dm800-20120213-r0_dm800.ipk




dreambox-dvb-modules_2.6.18-7.4-dm800-20120213-r0_dm800.ipk

[korn]

update dm800 hardware drivers
16-02-2012

update hardware drivers

16.02.2012


- fixed overflow on aspect ratio calculation
this fixes possible wrong scaled content
- fixed scale factor calculation for dm800
i.e. fixes wrong scaled IPTV services
- fixed non transparent framebuffer after bootup
this fixes not visible bootlogo before e2 starts on dm800

dreambox-dvb-modules-dbg_2.6.18-7.4-dm800-20120216-r0_dm800.ipk




dreambox-dvb-modules-dev_2.6.18-7.4-dm800-20120216-r0_dm800.ipk




dreambox-dvb-modules_2.6.18-7.4-dm800-20120216-r0_dm800.ipk

[ilias]

Drivers DM 800 for the new opendreambox-2.0.0


DM800 HD

[korn]

Update: OE2 Driver

[IMG]http://desmond.**************/Himg843/scaled.php?server=843&filename=infosk.jpg&res=medium[/IMG]

update dreambox hardware drivers:

- fixed DVB-T with tda1004x based NIM

- fixed HDMI/DVI mode detection bug



dm7020hd:

- added support for WMA (without DRM only)

- added support for WMV3 and VC1 (without DRM only)

[img]http://img696.**************/img696/4391/suzy1h.png[/img]

[korn]

New Driver 25.03.2013

update dreambox hardware drivers:

- fixed a demux problem which can cause 0 byte ts files when multiple parallel high bitrate recordings are running (from same transponder/demux)

dm500hd, dm800se, dm800
----------------------- -
fixed a small vtuner bug (in /proc/bus/nim_sockets)

dm800se, dm500hd, dm8000, dm7020hd
---------------------------------- -
fixed a small MPEG4 ASP playback bug (xvid, divx, ...)

dm800
----- -
fixed a vtuner bug which can cause deadlocks

dreambox-dvb-modules_2.6.18-7.4-dm800-20130325-r7.0_dm800.ipk

[korn]

New Driver 01.05.2013





dreambox-dvb-modules_3.2-dm800-20130501-r7.0