Power of Dreams HD+ 2.0.5 (POD HD+) CrossEPG Edition for Vuo+Solo
24-07-2011
Changes:
Update the image at the official image 5.10
Open Embedded
- Update OE tree
- Add wireless usb drivers
- Add WirelessLANSetup Plugin
- For details, please take a loot at git log.
Driver update
20110708
- Support DTS audio codec
- Fix CI recognition problem when restart
- Fix restart crash/delay problem
Power of Dreams HD+ 2.0.5 (POD HD+) CrossEPG Edition for Vuo+Solo
29-07-2011
Changes:
- Fix pour le soucis de LCD Duo qui ne fonctionnais pas normalement
==> Power of Dreams HD+ 2.0.5 (POD HD+) CrossEPG Edition for Vuo+ Solo
Bavaria the real Germany
I Love my Dreambox DM7020HD
Power of Dreams HD+ 2.0.5 (POD HD+) CrossEPG Edition for Vuo+ Solo
24-08-2011
Changes:
Open Embedded
- Update blind scan (uno)
- Update ManualFanControl plugin (uno)
- Remove udev-static
- For details, please take a look at git log
Driver Update 20110715 (uno)
- Lower the default FAN rpm
- Increase dynamic range of FAN speed
20110817
- Change key code of audio button (uno)
- Change remote control response code (remote control of uno works only in uno)
- Fix occasional not moving FAN problem (uno)
- Remove udev-static
Power of Dreams HD+ 2.0.5 (POD HD+) CrossEPG Edition for Vuo+ Solo
27-08-2011
ATTENTION : modification de la gestion des images complètes
Avant : l'image POD complète ne changait pas lors des mises à jours, et pour installer un démo avec une POD à jour, il falait charger une image un peu ancienne et faire la mise à jour
Désormais : l'image complète POD est mise à jour elle aussi :
- pour installer une POD complète : prendre l'image en début de thread, vous êtes a jours
- si vous avec déjà une POD de la bonne génération installée, ca ne change pas, il suffit de mettre à jour (Menu - Paramétrer - Gestionnaire logiciel - Mise à jour logiciel)
Power of Dreams HD+ 2.0.5 (POD HD+) CrossEPG Edition for Vuo+Solo
13-10-2011
Changes:
Update the image at the official image 6.0
Open Embedded
- Add WebBrowser plugin(Duo needs a bootloader update)
- Add UI postion control plugin
- Add 3D framebuffer control plugin
- Add remote control system code control plugin
- For details, please take a loot at git log.
Driver update
20111006
- improve DVB-C/T tuning(uno)
- Fix incorrect display of DVB-C/T SNR/AGC(uno)
- Fix high-bitrate problem in CI(uno, needs a FPGA update, New Rev 4.2 FPGA image is at http://archive.vuplus.com/download/fpga/vuuno/4.2/)
- Support 3D framebuffer
- Add interface for UI position setup
- Add redundant fpga device at /dev (uno)
- Add ioctl for hdmi_cec(get physical/logical addr.)
- Fix audo mute in pass-through(uno)
- Add interface to set the system code of the remote control(uno)
- Add interface to disable REC VFD icon(uno,duo)
- Add interface to control global alpha
Power of Dreams HD+ in new version 2.0.6 for Vuo+Solo
14-10-2011
Changes:
- Based at the official image 6.0
Main new feature:
- Added a web browser plugin (except solo)
- Added a plugin for precise placement of the UI to fit your HDTV (overscan ... Wink
- Added a plugin for managing 3D menus
20111006
- Improve DVB-C / T tuning (uno)
- Fix incorrect display of DVB-C / T SNR / AGC (uno)
- Fix problem in high-bitrate CI (uno, needs a FPGA update, New Rev 4.2 FPGA image iz at http://archive.vuplus.com/download/fpga/vuuno/4.2/)
- Support 3D framebuffer
- Add UI interface for setup position
- Add redundant FPGA device at / dev (uno)
- Add ioctl for hdmi_cec (get physical / logical addr.)
- Fix mute Audo in pass-through (uno)
- Add interface to set the system code of the remote control (uno)
- Add interface to disable REC icon VFD (uno, duo)
- Add interface to control the overall alpha
Power of Dreams HD+ 2.0.6 (POD HD+) Vuo+Solo
HTML Code:04-02-2012 Changes: - Update Hypercam 2.18: support for HD channels on some maps csat. - This update is probably the last of the series based on Linux 2.6.18, the POD HD based on 3.1.x comming soon.
:cool.e.n.g.u.i.ns.a.l.u.tHTML Code:http://hotfile.com/dl/145174143/f6cb954/vuplus-solo-pod-hdplus-206.zip.html
There are currently 1 users browsing this thread. (0 members and 1 guests)